高熔金属

The GYG-1-240 energy conservation power frequency has the core smelting furnace, mainly uses in smelting the carbon steel, metals and so on alloy steel, high-manganese steel, ferroalloy, cast alloy iron, gray iron, copper, copper alloy smelts, because the furnace temperature is higher than 1600℃, and has six grade of temperature controls, suitably in 1250-1600℃ the different melting point metal's smelting, and may fall the files heat preservation to wait for the casting or the adjustment melt fluid ingredient, the electromagnetism magnetic field magnetic line of force automatic agitation causes the ingredient to be even, non-element loss by burning.

GYG-1-240节能型工频有芯熔炼炉，主要用于熔炼碳素钢，合金钢、高锰钢、铁合金、合金铸铁、灰铸铁、铜、铜合金等金属熔炼，由于炉温高于1600℃，并有六档温度调节，可适用于1250-1600℃不同熔点金属的熔炼，并可降档保温等候浇铸或调整熔液成份，电磁磁场磁力线自动搅拌使成份均匀，无元素烧损。

The GYG-1-240 energy conservation power frequency has the core smelting furnace, mainly uses in smelting the carbon steel, metals and so on alloy steel, high-manganese steel, ferroalloy, cast alloy iron, gray iron, copper, copper alloy smelts, because the furnace temperature is higher than 1600℃, andhas six grade of temperature controls, suitably in 1250-1600℃ the different melting point metal's smelting, and may fall the files heat preservation to wait for the casting or the adjustment melt fluid ingredient, the electromagnetism magnetic field magnetic line of force automatic agitation causes theingredient to be even, non-element loss by burning.

GYG-1-240节能型工频有芯熔炼炉，主要用于熔炼碳素钢，合金钢、高锰钢、铁合金、合金铸铁、灰铸铁、铜、铜合金等金属熔炼，由于炉温高于1600℃，并有六档温度调节，可适用于1250-1600℃不同熔点金属的熔炼，并可降档保温等候浇铸或调整熔液成份，电磁磁场磁力线自动搅拌使成份均匀，无元素烧损。

The cathode phenomena in hollow cathode arc discharge in vacuum wereinvestigated systematically. The influence of welding parameters on active zone ofhollow cathode , arc appearance and voltage-ampere curve was investigated.

小电流的发散态电弧能量密度低，柔性大，可作为局部加热热源进行真空钎焊；大电流的可作为理想的熔焊热源，进行各种难熔易氧化金属在真空条件下的高质量焊接。

The columniform samples are made with the pressure of 150?MPa that contain graphite,Al 2O 3,SiO 2 and MgO powder.With samples heated at 1?420?℃,1?500?℃ and 1?600?℃ for 4 hours,MgAlON and 21R-AlN Sialon are synthesized by carbothermal reduction nitridation in the sample,MgAlON and 21R-AlN Sialon occure at 1?420?℃.With tempreture rising to 1?600?℃,MgAlON and 21R-AlN Sialon are increasing.

与高温氧化物相比，碳由于熔点高，热膨胀系数小，导热性好，热稳定性和化学稳定性好，不易被液态金属和熔渣润湿等特点，而成为优质耐火原料，使耐火材料在抗熔渣侵蚀和抗热震等性能方面得到质的飞跃。

The furnace body is made ф2200×1500 the outer covering main body by the 12mm steel plate, lower part the furnace body 45° the installment has the sensor, the sensor orientation silicon steel plate is made the weight 2 ton induction iron cores by Wuhan Steel Corporation Silicon steel plate Factory production top gear's W-151 the cold rolling 0.35m/m, primary is made the water cooling coil by 10×10×2 the copper pipe, and installs the stainless steel water cooling restricting, the power frequency has the core smelting furnace's metal melt fluid namely for the sensor sencondary coil, the entire electric stove is a transformer actually, the necessary 6 grades from the pair regulating transformer, shift gears by the electricity cabinet control, the voltage may from low to high, divide 6 promotions to arrive at 380V, each grade of voltages are different, the output is also different, the furnace temperature along with the files position is also different, but the height is different, adapts smelts colored or the black and so on melting point different metals, and may make the new furnace lining to smelt diamantine drying furnace fireproof.

炉体由12mm钢板制成Ф2200×1500外壳主体，炉体下部45°安装有感应器，感应器由武钢硅钢片厂生产的最高档的W-151冷轧0.35m/m取向硅钢片制成重2吨感应铁心，初级由10×10×2铜管制成水冷线圈，并安装不锈钢水冷保护套，工频有芯熔炼炉的金属熔液即为感应器的次级线圈，整个电炉实际就是一个变压器，配套一台6档的自耦调压变压器，由电柜控制换档，电压可由低到高，分6级升到380V，每档电压不同，输出功率也不同，炉温也随档位不同而高低不同，以适应熔炼有色或黑色等熔点不同的金属，并可作新炉衬耐火冶金砂烘炉之用。

The furnace body is made ф2200×1500 theouter covering main body by the 12mm steel plate, lower part the furnace body 45° the installment has the sensor, the sensor orientation silicon steel plate is made the weight 2 ton induction iron cores by Wuhan Steel Corporation Silicon steel plate Factory production top gear's W-151 the cold rolling0.35m/m, primary is made the water cooling coil by 10×10×2 the copper pipe, and installs the stainless steel water cooling restricting, the power frequency has the core smelting furnace's metal melt fluid namely for the sensor sencondary coil, the entire electric stove is a transformer actually, thenecessary 6 grades from the pair regulating transformer, shift gears by the electricity cabinet control, the voltage may from low to high, divide 6 promotions to arrive at 380V, each grade of voltages are different, the output is also different, the furnace temperature along with the files position isalso different, but the height is different, adapts smelts colored or the black and so on melting point different metals, and may make the new furnace lining to smelt diamantine drying furnace fireproof.

炉体由12mm钢板制成Ф2200×1500外壳主体，炉体下部45°安装有感应器，感应器由武钢硅钢片厂生产的最高档的W-151冷轧0.35m/m取向硅钢片制成重2吨感应铁心，初级由10×10×2铜管制成水冷线圈，并安装不锈钢水冷保护套，工频有芯熔炼炉的金属熔液即为感应器的次级线圈，整个电炉实际就是一个变压器，配套一台6档的自耦调压变压器，由电柜控制换档，电压可由低到高，分6级升到380V，每档电压不同，输出功率也不同，炉温也随档位不同而高低不同，以适应熔炼有色或黑色等熔点不同的金属，并可作新炉衬耐火冶金砂烘炉之用。

According to the variation in the components of intermediateacid igneous rocks coming from the lower crust, it is possible to restrain the depth of the source area and the minimum thickness of the crust, and thus to provide important information for the study of the deep process of the continental intraplate mineralizationGlobally, many world level porphyry copper deposits and metallogenic systems formed by hypabyssal hot liquid have their close relationship with the synchronous adakite in spacetime and genesis; domestically, the adakitelike rocks have been identified to be related to the metallogenesis in the main metallogenic areas in ChinaThe recognition of adakitelike rocks having no relationship with the process of subduction makes it possible to construct a metallogenic model of continental intraplate porphyry metal deposits by combining other geological evidences, and this model is totally different from the metallogenic model of porphyry copper deposits with Bsubduction setting constructed by Sillitoe (1972)The existence of adakitelike rocks may be the necessary condition but not the sufficient one for forming the largescale porphyry deposits and the hypabyssal hotliquid deposits, whose metallogenic elements mainly came from the mantleThe metallogenic potential of adakitelike rocks is achieved by the entering of the mantle material, and the metallogenic specialization of adakitelike rocks is decided by the distribution characteristics of the metallogenic elements in the upper mantleAn important reason for the adakitelike magma related to subduction being advantageous to mineralization is that there were abundant high pressure and high temperature liquid coming from the subducted platepieces and the magma of high fO2 coming from the melting of subducted platepiecesHowever, for those adakitelike rocks, whose occurrence has continental plate background but does not relate to the subduction, their metallogenic mechanism is not clear yetBased on the concept of modern mineral exploration and combined with the analysis of integrated geological information, we may better realize the practical prospecting significance of the adakitelike rocks

根据起源于下地壳的中酸性岩浆岩的成分变化，可以约束其源区深度以及地壳最小厚度，为大陆板内成矿作用的深部过程研究提供重要信息。全球范围内，许多世界级斑岩铜矿和浅成热液矿化系统与同期的埃达克质岩存在密切的时空与成因联系，在国内主要成矿区带也识别出与金属成矿作用有关的埃达克岩。与俯冲过程无关的埃达克质岩的识别，使我们有可能结合其他地质证据构建完全不同于Sillitoe(1972)B型俯冲环境的斑岩铜矿成矿模式的大陆板内斑岩型金属矿床成矿模式。对于规模巨大、矿质主要源自地幔的热液矿床的形成，埃达克岩可能是必要条件，但不是充分条件。埃达克岩的成矿潜力通过地幔物质加入而获取，埃达克岩的成矿专属性由上地幔成矿元素分布特征决定。与俯冲有关的埃达克质岩浆之所以有利于成矿，重要的原因是存在大量来自俯冲板片的高压、高温流体以及俯冲板片熔融形成高氧逸度(fO2)的熔体，但产出在大陆板内背景、与俯冲无关的埃达克岩的成矿机制还不清楚。根据现代资源勘查理念，结合综合地质信息分析，埃达克质岩具有实际找矿意义。

The high velocity arc spraying technology and powder-cored metal threads were bi-used to repair the waste components, and the integration between coating preparation and materials formation to Fe-Al base intermetallic compounds came true. A new supersonic ion spraying technique, named bi-channel, bi-temperature, was invented to solve successfully the issues of over-melting, half-cooked and burned materials. The high-energy mechanical and chemical method with own property right was explored to solve successfully the issue, which the nano particles dispersed evenly and suspended stably in the solution. After perfecting the techniques the high-performance co-electrodeposition between the conductive matrixes metal Ni and the nonconductive nano particles carried out. The excellent nano anti-friction self-repairing additives was prepared to achieve elementarily the self-repairing on the worn surface during the equipment worked.

首次将高速电弧喷涂技术与粉芯丝材相结合的方法应用于再制造零部件的表面修复，实现了Fe-Al金属间化合物的制备与涂层成形一体化；发明了一种&双通道、双温区&的高效能超音速等离子喷涂新工艺，解决了过熔、夹生及烧损问题；开发了具有自主知识产权的高能机械化学法，解决了纳米电刷镀时纳米颗粒在多离子溶液体系中的均匀分散与悬浮稳定的难题，通过工艺优化实现了非导电的纳米颗粒与导电的基质金属镍的高效共沉积；发明并制备了性能优异的纳米减摩自修复添加剂，初步实现了在装备运行过程中对磨损部位的原位动态自修复。

After heat treatment, borides of samples made of sand mould were changed little, otherwise, borides of samples made of metal mould were changed to granulation shape and the impact toughness was increased by 60%..

高硼铁基合金熔体在金属模和砂模不同凝固条件时，奥氏体初晶晶粒随冷却速度增加而减小，硼化物形态发生较大变化；热处理后，砂模铸造的试样，硼化物形态变化不大，而金属模铸造的试样硼化物粒化，其冲击韧度提高了60％。

The furnace body's ф2200×1500 outer covering main body is made of 12mm steel plate,installed sensor in the lower part 45°of furnace body, the sensor is weight 2 ton induction iron cores made from top gear's W-151 the cold rolling 0.35m/m made by Wuhan Steel Silicon steel plate Factory, primary manufactured the water cooling coil from 10×10×2 copper pipe, and installed stainless steelwater cooling cover, the power Frequency Induction melting Furnace 's metal melting fluid namely the sensor sencondary loop, the entire electric furnace is a transformer actually, match a 6 grades self regulating transformer, shift gears by the electric tank control, the voltage may from low to high,divide 6 grade to rise to 380V, each grade of voltage is different, the output power is also different, the furnace temperature is also different along with different grade,so can suit smelting colored or black and so on different melting point metals, and may use as new furnace lining fireproof to smeltdiamantine drying furnace.

炉体由12mm钢板制成Ф2200×1500外壳主体，炉体下部45°安装有感应器，感应器由武钢硅钢片厂生产的最高档的W-151冷轧0.35m/m取向硅钢片制成重2吨感应铁心，初级由10×10×2铜管制成水冷线圈，并安装不锈钢水冷保护套，工频有芯熔炼炉的金属熔液即为感应器的次级线圈，整个电炉实际就是一个变压器，配套一台6档的自耦调压变压器，由电柜控制换档，电压可由低到高，分6级升到380V，每档电压不同，输出功率也不同，炉温也随档位不同而高低不同，以适应熔炼有色或黑色等熔点不同的金属，并可作新炉衬耐火冶金砂烘炉之用。

According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.

曝气设备的动力效率在叶轮转速为120rpm～150rpm时取得最大值，此时氧利用率和充氧能力也具有较高值。

The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.

稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世，形体几无变化。