高温测定

With the aid of GX High-Temperature Physical Function Determinator the melting temperature of coating was measured.

使用GX型—高温物性测试仪测定焊条药皮的熔点。

In order to calculate the coil internal temperature and stress field accurately, the elastic modulus and expansion coefficient of carbon steel in hi-temperature were measured.

为了准确地计算钢卷内部的温度场和应力场，本文对碳钢在高温下的弹性模量、热膨胀系数进行了实验室测定。

Based on literature survey the writer takes as basis the thermodynamic data determined experimentally and published in the literature and, in the light of the theory related to heterogeneous reaction system in thermodynamics, gives a detailed analysis of thermodynamic stability under temperature and atmospheric conditions in the shift reactor with the iron-based high-temperature shift catalyst, obtaining relevant equilibrium phase diagram of the heterogeneous reaction system and corresponding calculation formulas.

笔者在文献调研的基础上，以文献发表的、经由试验测定的热力学数据－标准生成自由能为依据，根据热力学中非均相反应体系的有关理论，对铁基高温变换催化剂在变换反应的气氛与温度条件下的热力学稳定性进行了较详细的分析，建立了相关的非均相反应体系的平衡相图和相应的数学表达式。

Machinable bioactive glass-ceramics containing mica and fluorapatite were prepared by high-temperature melting. The glass-ceramics were analyzed by means of X-ray diffractometry, scanning electron microscopy with energy dispersive spectrometer and Fourier transform infrared reflection spectrometry. The bending strength, hardness and fracture toughness of the materials were measured.

摘 要：采用高温熔铸法制备可加工生物活性云母/氟磷灰石玻璃陶瓷；用X射线衍射、扫描电镜和傅里叶变换红外光谱分析等手段对材料的相组成和微观形貌进行研究，测定材料的抗弯强度、硬度和断裂韧性等力学性能；采用体外模拟体液浸泡法测试材料的生物活性。

Machinable bioactive glass-ceramics containing mica and fluorapatite were prepared byhigh-temperature melting. The glass-ceramics were analyzed by means of X-ray diffractometry, scanning electron microscopy with energy dispersive spectrometer and Fourier transform infrared reflection spectrometry. The bending strength, hardness and fracture toughness of the materials were measured.

摘 要：采用高温熔铸法制备可加工生物活性云母/氟磷灰石玻璃陶瓷；用X射线衍射、扫描电镜和傅里叶变换红外光谱分析等手段对材料的相组成和微观形貌进行研究，测定材料的抗弯强度、硬度和断裂韧性等力学性能；采用体外模拟体液浸泡法测试材料的生物活性。

For the sake of matching foam fluid frilling technology, international developed country has developed a series of foam fluid process technology, which run through each process of drilling, consummate well, increase output, exploitive and dynamic adjust.

为了与泡沫流体钻井技术相配套，国际上发达国家发展了一系列的泡沫流体作业技术，贯穿于钻井、完井、增产改造、开发及动态调整的各个过程。预计泡沫技术在我国会有相当大的应用前景。而在所有泡沫流体的作业中，一项共同的、重要的基础工作是研究、测定高温高压条件下的泡沫流体特性。

The company's main products: color detection instruments: Glossiness Miriam, Miriam color spectrophotometry, standard light source for color light box, transmissioní°Miriam, Miriam orange peel, fresh young tester; surface coating physical properties testing instruments: Coating thickness, wet film thickness, temperature tracker, surface humidity instrument, dewpoint meter, roughness instrument, electric spark pinhole leak detectors; Detect mechanical properties of surface coating equipment: zoned grid, and pencil hardness tester , impact tester, hardness testing sticks, Latvia Law / hydraulic adhesion tester, abrasion tester, cylinder / cone bending tester, cups sudden device, surface tension instruments, scratch pen, indentation hardness tester, etc.; paint coating equipment dedicated category: fineness board, drying time recorder, wet adhesion tester, paint ohmmeter, PH, the coating device, mixer, bead mill, mixer, spray gun, putty detector Miriam, white tester, iron cobalt colorimeter, moisture titrator; viscosity-type equipment: Viscosity Cup, density cup, bubble viscosity tube viscometer, infiltration cup rheometer, viscosity units conversion meter; laboratory standard consumables: Mitsubishi pencil tests, 3M adhesive tape test, RCA tape, rubber, the hiding power test paper for color tubes, microscopes dedicated LED ring light source, transfer ink knife and ink scraper, brush, Color Card, gray cards, zirconia beads, glass beads, pieces of cement mortar, the standard of fly ash, the standard viscosity fluid, stopwatch, chemical industry-standard compilation of manuals, paint paint testing manual; test standard Material: tin plate, steel plate, aluminum sheet, asbestos-cement pressure plate, Eterpan, glass, maple panels, MDF, copper film, polyester film, copper; measuring meter and optical instruments: digital calipers, micrometer, dial gauge a high scale, depth gauge, thickness gauge, diameter gauge, gauge block, magnifiers, microscopes, projectors, video measuring instrument; environmental test equipment: oven, constant temperature and humidity box, hot and cold circulating water bath, salt spray test chamber, high temperature resistance furnace, fluorescent UV aging chamber, xenon lamp aging chamber; electronics equipment: infrared thermometer, multimeter, clamp sheet, thermal imager, temperature and humidity meter; anti-static instruments: static tester, surface resistivity device, flat-panel monitor, anti-static footwear tester, wrist strap tester, body Tester; other types of instruments and equipment: torque tester, temperature and humidity recorder, push pull, the vibrometer, speed instrument, analytical balance, industrial Scale Units, dust particle counter, X-ray fluorescence coating thickness measurement and elemental composition analyzer, and so on.

公司主营产品：外观颜色检测仪器：光泽度仪、分光色差仪、标准光源对色灯箱、透射雾影仪、桔皮仪、鲜映性测试仪；表面涂层物理性能检测仪器：涂层测厚仪、湿膜测厚仪、炉温跟踪仪、表面湿度仪、露点仪、粗糙度仪、电火花针孔检漏仪；表面涂层机械性能检测仪器设备：划格器、铅笔硬度计、冲击试验仪、硬度试验棒、拉脱法/液压式附着力试验仪、耐磨耗试验机、圆柱/圆锥弯曲试验仪、杯突仪、表面张力仪、划痕笔、压痕硬度计等；涂料油漆类专用仪器设备：细度板、干燥时间记录仪、湿附着力耐擦洗试验仪、油漆电阻计、PH计、涂膜器、混合机、珠磨机、搅拌机、喷枪、腻子测定仪仪、白度仪、铁钴比色计、水份滴定仪；粘度类仪器设备：粘度杯、密度杯、气泡粘度管、粘度计、渗透杯、流变仪、粘度单位换算计；实验室标准消耗品：三菱测试铅笔、3M测试胶带、RCA纸带、橡皮条、遮盖力测试纸、对色灯管、显微镜专用LED环型光源、调墨刀、墨铲、狼毫刷、色卡、灰卡、锆珠、玻璃珠、水泥砂浆块、标准粉煤灰、标准粘度液、秒表、化学工业标准汇编手册、涂料油漆测试手册；测试级标准基材：马口铁板、钢板、铝板、石棉水泥加压板、埃特板、玻璃板、枫木面板、中纤板、紫铜片、聚酯膜、铜棒；量具量仪及光学仪器：数显卡尺、千分尺、千分表、高度尺、深度规、厚度规、内径规、量块、放大镜、显微镜、投影仪、影像测量仪；环境测试设备：烘箱、恒温恒湿箱、冷热循环水浴、盐雾试验箱、高温电阻炉、荧光紫外老化试验箱、氙灯老化试验箱；电子类仪器：红外测温仪、万用表、钳形表、热像仪、温湿度仪；防静电仪器：静电测试仪、表面电阻仪、平板监测仪、防静电鞋袜测试仪、手腕带测试仪、人体综合测试仪；其他类仪器设备：扭力测试仪、温湿度记录仪、推拉力计、测振仪、转速仪、分析天平、工业台秤、尘埃粒子计数器、 X-射线荧光涂层测厚和元素成分构成分析仪，等等。

Mainly used for laboratory and scientific research institutions, factories and mines enterprises, medical and public health departments of physics, chemical analysis, high temperature testing, small pieces of steel, such as heat treatment used.

主要用于实验室、科研院校、厂矿企业、医疗卫生等部门作物理测定、化学分析、高温试验、小型钢件热处理等用。

Using of optical microscopy, X-ray diffraction, transmission electron microscopy, hardness and tensile testing, the effect of thermal exposure at high temperatures on the microstructures and of high-temperature tensile properties of rapidly solidified AlCrYZr have been studied. The results show that there are two main phases,Al20Cr2Y(cubic, a=1.437 nm) and DO23Al3Zr(terganal, a=0.4 013 nm , c= 1.732 nm), in the as-solidified alloy. The Al20Cr2Y phase can maintain its cubic structure at 500℃, but the particles coarsen remarkably and even become lumpish. In coarse lumpish Al20Cr2Y phase the plane faults and twin structures exist.

摘 要：采用金相、 X射线衍射、透射电镜、硬度测定和拉伸试验研究了高温热暴露对快速凝固AlCrYZr合金显微组织影响和高温下力学性能的热稳定性，结果表明，快速凝固AlCrYZr合金主要第二相为Al20Cr2Y(立方，a=1.437nm)和DO23Al3Zr(正方，a=0.401 3nm， c=1.732nm)，Al20Cr2Y在500℃热暴露尚能保持其立方结构，但质点明显粗化，甚至块状化，在粗大的Al20Cr2Y相中存在有层错和孪晶结构。

The binary and ternary VLE data of mesitylene, o-ethyl-methylbenzene and 1, 2, 4-trimethylbenzene was measured in this paper and they passed the check of thermodynamics. Then along with the binary and ternary VLE data, the least square method was used to solve vapour-liquid equilibrium model.

采用高温汽液平衡釜测定均三甲苯、邻甲乙苯及偏三甲苯的二元及三元气液平衡数据，并进行热力学一致性检验；采用最小二乘法并结合汽液平衡数据关联汽液平衡模型。

And Pharaoh spoke to Joseph, saying, Your father and your brothers have come to you.

47：5 法老对约瑟说，你父亲和你弟兄们到你这里来了。

Additionally, the approximate flattening of surface strip using lines linking midpoints on perpendicular lines between geodesic curves and the unconditional extreme value method are discussed.

提出了用测地线方程、曲面上两点间短程线来计算膜结构曲面测地线的方法，同时，采用测地线间垂线的中点连线和用无约束极值法进行空间条状曲面近似展开的分析。