预焙

Two lines +12 V can provide amperage up to 30 A. The noise level on average is below 30 dB.

两条线+12 V的，可提供预焙多达30甲噪音水平平均低于30分贝。

This system has gained satisfactory results by using apery intelligent algorithm .

预焙阳极焙烧炉，模糊控制，仿人智能控制，遗传算法

The main research contents and results are shown as follows:(1) In order to meet the actural need of this research project, the general ways to bake electrolyzer, which include Aluminium-liquor- baking method, coke-ash-baking method and graphite-powder-baking method, are introduced in details. Their shortcomings and effects on the life-span of electrolyzer are also analyzed.

全文的主要工作和成果总结如下：(1)根据实际科研项目的需要，对现有的预焙电解槽焙烧启动方法铝液焙烧法、焦粉焙烧法和石墨焙烧法进行分析，指出其缺点。

The TCC technology was successfully applied to two of 160kA prebake cells in Pingguo Aluminum Company. It was shown that no tear-off of TCC was indicated after starting up of the cells. The operation of coating cells was improved to keep good shape of cell chamber, reduce the formation of sludge on the cell bottom, and gain more uniform current distribution.

将TIB：阴极涂层技术在160kA大型预焙槽进行了应用，并考核了涂层槽的指标，结果显示，焙烧启动后，TIB：阴极涂层不脱落，涂层槽的工作状态良好，炉膛规整，炉底干净，电流分布均匀；与对比槽比较，阴极内衬对钠的吸收减少，钠渗透速率减缓，炉底压降降低(平均降低39mv)，电流效率提高(平均提高0.41%)；涂层的寿命为38个月。

The TCC was still good and in integrity after 12h of electrolysis. The TCC technology was successfully applied to two of 160kA prebake cells in Pingguo Aluminum Company. It was shown that no tear-off of TCC was indicated after starting up of the cells. The operation of coating cells was improved to keep good shape of cell chamber, reduce the formation of sludge on the cell bottom, and gain more uniform current distribution.

将TiB〓阴极涂层技术在160kA大型预焙槽进行了应用，并考核了涂层槽的指标，结果显示，焙烧启动后，TiB〓阴极涂层不脱落，涂层槽的工作状态良好，炉膛规整，炉底干净，电流分布均匀；与对比槽比较，阴极内衬对钠的吸收减少，钠渗透速率减缓，炉底压降降低（平均降低39mV），电流效率提高（平均提高0.41％）；涂层的寿命为38个月。

The TiB2 cathode coating was tested in existing 190kA prebake cells.

3在现行190kA预焙铝电解槽上进行了TiB_2涂层阴极的工业生产试验，考核在用焦粒焙烧所产生的热量制备TiB_2涂层阴极的过

An adaptive fuzzy control system for 300kA prebake aluminum production cells was designed, which includes the sampling, transmission and pretreatment of the parameters, the database and fuzzy logical determination, the parameter recognition and adaptivity of the fuzzy rule and actuor.

摘 要：采用自适应模糊技术，设计了300kA预焙槽电解质温度和初晶温度的控制系统。该系统包括参数采集，参数网络传输和参数预处理，专家知识规则库、模糊逻辑决策，参数辨识、模糊规则自适应，人机界面和执行机构等模块。

Combination with the practice of domestic aluminium production industry, the 3—D current distribution, magnetic flux density, electro—magnetic force, melt flow velocity field of three diffrent cells, that is, 80KA Soderberg cell with vertical stub, 155KA prebake cell, 160KA prebake cell were computed and the related computer—simulated pictures were drawn by use of the softwares we made.

本文利用电流分布、磁场、电磁力场和流场的计算软件，结合我国生产实际计算了80KA上插自焙槽，155KA预焙槽，160KA预焙槽三种不同槽子的三维电流分布，槽内磁感应强度，熔体中电磁力场，熔体流速场，绘制了相应的计算机仿真图，为了增加计算软件的可靠性、用铁棒法测定了80KA上插自焙槽，155KA预焙槽的铝液流速，测定值与计算值符合较好。

Results The SiO2-ZrO2 composites were calcined at 200℃ prior to sulfating, the concentration of sulfuric acid was 1.0 mol/L ,the molar ratio of Si and Zr was 15, the calcination temperature was 500℃, the molar ratio of ethynol and lactic acid is 3/1, the yield of the ester could reach 92.7%.

结果SO4^2-／SiO2-ZrO2固体超强酸催化乳酸乙酯的合成反应适宜的反应条件为：预焙烧温度为200℃，浸泡硫酸浓度为1.0mol／L，硅锆摩尔比为15，焙烧温度为500℃，醇酸比为3时，酯化率可达92.79／6。

By analysis on baking data of 300kA large-type prebaked cells,the deficiency existing in original baking start-up process was discovered,and then improvement measures were taken accordingly.

本文通过300kA大型预焙槽焙烧数据的分析，发现了原来的焙烧启动过程中存在的不足，采取了改进措施并得了好的效果。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。