面

Rubber dam laboratory model experiment: respectively measures the reaeration ability of smooth overflow surface and roughened overflow surface, then contrastively analyses the effect and reason of reaeration improving after roughened modification, and the reaeration effect between curve dam and rubber dam.

橡胶坝复氧室内模型试验：分别测量了光滑溢流面和糙化溢流面的复氧能力，对比分析了溢流面糙化后复氧增强的效果和原因，并对摘要比分析了曲线型溢流坝和橡胶坝的复氧效果。4。

Based on the research, results from home and abroad, according to the characteristic of the widely-adopted semi-rigid pavement, the thesis studies the cold in-place recycling technology, and proposes the method of the mixture design of cold in-place recycling, the reasonable ratio of the pavement to the base and the amount of cement utilized. Moreover, the thesis delves on the mechanical property, construction craft and quality control of the old asphalt mixture after recondition, how to apply the recycling mixture to the base, and cater to the needs of performance.

本文在国内外已有研究成果的基础上，根据国内普遍采用半刚性基层沥青面层这一结构特点，研究旧沥青路面的现场冷再生技术，提出了冷再生混合料的配合比设计方法，合理的基、面层掺配比例及水泥剂量，深入研究了旧沥青路面材料再生后的力学性能、施工工艺以及质量控制及检测，并将再生的混合料应用于路面基层，满足相应的路用性能要求。

Shandong Easytouch match factory is designed for all major hotels, restaurants, restaurants, alcoholic drinks and tobacco enterprises, tourism, leisure and entertainment to provide a dedicated manufacturer of matches gifts, breeds all kinds of specifications models have a book-style,éstyle, triangle , rectangular, lipstick-type, such as dozens of products, the use of white card boxes noodles, glass card, plastic, sub-membrane, four-color offset printing, bronzing and other high-end printing technology.sticks of white phosphorus surface smooth, clean and safe.

山东同创火柴厂是专为各大宾馆、饭店、餐厅、烟酒企业、旅游业、休闲娱乐场所等提供专用礼品火柴的生产厂家，品种有各种规格型号的书式、抽拉式、三角形、长方型、口红型等几十种产品，盒面采用白卡、玻璃卡、塑膜、亚膜、四色胶印、烫金等高档印刷工艺。火柴梗枝洁白，磷面光滑、整洁、安全。

The sediments of delta front around wave base plane are eroded by wave action and took along to redeposit below wave base plane, during which turbidite is formed.

波浪作用可以侵蚀浪基面附近的三角洲前缘砂体，并在回流作用下携带至最大浪基面之下再沉积，沉积过程中形成小型浊积体。

The results show that,after considering the Geodi-spheroid separation(the reference ellipsoid and the EGM96 Geoid are used as vertical datum for GPS and SRTM respectively),the height differences between SRTM and GPS are very small.

结果显示，经过大地水准面差距补偿后(GPS和SRTM分别采用参考椭球面和EGM96大地水准面作为高程基准)，SRTM和GPS高程的差异非常小，基本上在0附近波动。

Take this red rock as a reference mark. The position of red rock layer on the left sides of the inclined plane is lower than that on the right sides of the inclined plane.

若以这一层红色岩石为标志层，那么在那个倾斜面左侧的红色岩层的位置相对于倾斜面右侧的红色岩层要低。

Take this red rock as a reference mark. The position of red rock layer on the left sides of the incline d plane is lower than that on the right sides of the incline d plane.

若以这一层红色岩石为标志层，那么在那个倾斜面左侧的红色岩层的位置相对于倾斜面右侧的红色岩层要低。

An accurate measurement scheme is proposed for testing the error of cone prisms with Hartmann wavefront sensor. The measurement theory was discussed, the reconstruction of the wavefront reflected from a cone prism was studied, and the relation between the wavefront characteristics and the errors of a cone prism was given.

因此，提出一种用哈特曼波前传感器全面检测角锥棱镜角度误差和面形误差的技术方案，从理论上分析了哈特曼法的测量原理，深入研究了光经过角锥棱镜后的波面重建，给出了波面特征与角锥棱镜误差参量之间的关系。

The effect of meteorological factors on the rats density could be evaluated by RSM model. This model was superior to linear regression model. The effect of meteorological factors on rats density was resulted from multiple factors and their interaction.

响应面分析法能够较好地应用于气象因子对鼠密度的影响，建立的响应面模型优于多元线性回归，气象因素对鼠密度的影响是多因素及交互作用的结果。

On the basis of the previous results and according to the central composite experimental design principles,the method of response surface method with 3 factors and 3 levels was adopted.then the factors influencing the technological parameters were determined by means of regression analysis.response surface and contour were finally graphed with the extraction rate as the response value.resultsthe optimum conditions of lycium barbarum polysaccharides extraction were as follows:the ratio of material to solvent of 1∶32,extraction temperature of 84℃ and extraction time of 2.3 h,one time extraction.conclusionthe yield of lycium barbarum polysaccharides is 11.10% under the optimum conditions.

方法在单因素实验基础上选取实验因素与水平，根据中心组合（box-benhnken）实验设计原理采用3因素水平的响应面分析法，依据回归分析确定各工艺条件的影响因子，以多糖提取率为响应值作响应面和等高线。结果在分析各个因素的显著性和交互作用后，得出枸杞多糖水浸提的最佳工艺条件为：料液比1∶32；浸提温度84℃；浸提时间2.3h；浸提1次。结论在最佳工艺条件下，枸杞多糖的实际提取率可达11.10%。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。