面

The variable geometry truss mechanisms have been studied extensively and systematically by this project. The research plan has been completed all sidedly, and expected results have been obtained. Three new kinds of combination decahedrons and a new class of variable geometry truss mechanism, which is composed of an octahedron and three tetrahedrons connected in parallel form, are proposed. The position analyses for decahedrons, dodecahedrons, triple-octahedrons, combinations decahedron and a new type of structure of variable geometry truss mechanisms are presented by introducing additional extra linear displacement sensors and using resultant elimination and homotopy continuation algorithms. The method of kinematical analysis of variable geometry truss mechanisms is established.

课题组对变几何桁架机构进行了深入的研究，全面地完成了研究计划，取得了预期的成果；提出了三种新的十面体组合机构以及由一个八面体和三个四面体组成的新型变几何桁架机构的结构形式；应用结式消元、附加传感器和同伦方法等提出了十面体、十二面体、三重八面体、组合十面体和新型变几何桁架机构的位置分析方法；建立了变几何桁架机构运动分析的一般方法；建立了简洁的凯恩和拉格伦日动力学的模型；应用有限元和子结构方法，提出了变几何柞架机构弹性动力学模型，导出了逆动力学方程的显式形式；设计和研制了一台可折叠的八面体变几何杵架机构装置等。

With the help of infrared spectroscopy, it is known that the linkage between dodecylamine and sodium oleate and diaspore, kaolinite, illite and pyrophyllite is fundamentally electrostatic forces, which contributes to physical adsorption. The adsorption is related with surface electric property of minerals. The effect of chemical composition of diaspores on their electrokinetics was investigated.

对于一水硬铝石矿物来说，三个主要晶面（010）、（100）和（001）上的单位面积断裂键数有如下关系：〓；一水硬铝石表面吸附的动力学模拟可以说明，一水硬铝石的（010）晶面、（100）晶面和（001）晶面，分别吸附几种捕收剂离子的吸附能大小为：（010）晶面的吸附能＞（100）晶面的吸附能＞（001）晶面的吸附能；分别吸附这些药剂离子的单位面积吸附量〓的大小顺序为：（010）晶面＞（100）晶面＞（001）晶面。

We build the model for the enveloping worm helix parametric equation and then analyze its relations with the enveloping worm helix tooth surface equation,thus establishing the characteristic model of the involute helicoid enveloping worm′s generative gears.

渐开面环面蜗杆的三维构建属复杂曲面造型，文章在环面蜗杆螺旋线参数方程建模的基础上，分析讨论了其与渐开面环面蜗杆螺旋齿面方程的对应关系，建立了渐开面包络环面蜗杆产型齿的特征模型。

Zeng Qing Dynasty imperial court tribute year after year, is listed as the best Imperial palace, known as the Palace side. In the 1950s, the organization Gaocheng county government departments, the palace of the traditional face-depth technical mining, sorting, recovery and development of the palace to start mass production side. County Grain Bureau in 1960 completed the first noodle production plant (later renamed the Palace face plant), sold in the main transmission Shijiazhuang. 80 food factories face Palace Bureau, Foreign Trade Bureau palace area, such as plant expansion and new factory after another, and the corresponding development of processing more than 4,000 Surface palace young professionals, the basic form of specialization and serialization Palace surface production system.

清代曾连年进贡朝廷，被列为宫廷御膳佳品，称之为宫面。20世纪50年代，藁城县政府组织有关部门，对宫面传统技术进行深入挖掘、整理，开始恢复和发展宫面批量生产。1960年县粮食局建成第一家挂面生产厂，变速器主要销往石家庄。80年代粮食局宫面厂、外贸局宫面厂等厂家相继扩建和新建，并相应发展起4000多个宫面加工专业户，基本形成专业化、系列化宫面生产体系。

Freezing soil is a natural phenomina in cold and mountain areas, which has great impact on the regional climate, water cycle, and water balance. The land surface process in the condition of soil freezing and thawing is one of the most important process in the area. This paper firstly reviews the present study on land surface process in the condition of soil freezing and thawing, especially the development after the the hydrological land surface model introduced into the study of General Circulation Model, then introduces the undergoing international research project, such as Project for Intercomparison of Land-surface Parameterization Schemes and Cold Land Process Field Experiment by NASA, and finally analyses and puts forward the future research field and topics.

冻土是全球中高纬地区和高山地带普遍存在的自然现象，它对全球以及区域性气候、水循环、水平衡等都有着巨大的影响，土壤冻融条件下的陆面过程正是这种影响的重要环节，介绍了土壤冻融条件下陆面过程的研究现状，特别是在大气环流模型中引入水文陆面模型以来陆面过程研究的迅猛发展，对现在国际上正在进行的考虑冻土的陆面过程研究项目，如陆面过程参数化比较计划的第二阶段第五期PILPS (2E)以及美国NASA的寒区陆面过程实地试验计划也进行了介绍，并在此基础上对土壤冻融条件下陆面过程的发展趋势进行了分析。

Based on investigating the short and intermittent structural plane, surrounding rockmass of the huge underground powerhouse in Three Gorge has been divided into five statistical similar areas according to its characteristic of rockmass structure by applying structure plane network simulation. Distributed characteristic of structural plane has been studied and based on it mechanics macrocharacteristic has been studied:(1) It is the first time that based on the result of structural plane network simulation rockmass quality of every structure area has been studied with applying blurred information optimum seeking technique and be compared with and RQD method. The result indicated that it has better effect to evaluate rock quality with blurred information optimum seeking technique.(2) It is the first time that the interrelated relationship of the result of in-suit rockmass deformation test and fractal characteristic of structure on test point has been applied to determine rockmass deformation parameter. The question of evaluating deformation parameters of engineering rockmass has been solved.(3) Anisotropy strength parameters have been determined by applying shear zones simulating method. The result indicated that there are different strength parameters in every structural area, after comparing the result of Fast Lagranian Analysis in continua number simulation method with that of method of weighted mean according to continuity. The result indicated that when a suitable reduction coefficient is been considered rockmass strength parameters can be simply and fast determined with method of weighted mean according to continuity where there is not enough test result.(4) Damage characteristic has been studied based on analysis fractal characteristic of structural plane network by applying fractal-damage coupling method. It is the first time that the concept of damage degree has been set up to evaluate rockmass quality according to the biggest principal damage.

通过对短小、断续性结构面统计特征的研究，将地下厂房区划分为五个岩体结构统计均质区，应用结构面网络模拟技术研究了各个岩体结构均质区结构面的发育分布特征，并以此为基础对岩体宏观力学特性进行了深入研究：(1)首次通过在结构面网络模拟计算结果的基础上，应用模糊信息优化技术研究了厂房区各个岩体结构分区的岩体质量并与岩体基本质量指标研究法、岩体质量指标RQD值研究法作了对比，结果表明以结构面网络模拟结果为基础，应用模糊信息优化技术进行岩体质量评价能够取得很好的效果，解决了工程岩体质量的定量评价问题；(2)首次通过对已有的现场大型岩体变形试验结果的分析及相应试验点岩体结构分形特征的研究，建立了结构面分布的分形维数和岩体变形指标间的相关关系，并首次应用这种相关关系根据结构面网络模拟及分形维数计算结果确定了缺少试验结果的地下厂房各工程部位的岩体变形指标而且应用于围岩稳定性计算，解决了工程岩体宏观变形参数的评价问题；(3)应用在结构面模拟网络图上模拟岩体剪切破坏带的方法，得出了岩体在不同方向上的强度参数，结果表明岩体的强度特性与结构面的发育方向和程度有着明显的关系，各个岩体结构均质区具有不同的强度参数；同时还通过应用拉格朗日差分法对岩体强度指标的数值分析并与按连通率加权平均计算法对比表明，按连通率加权平均计算法在考虑合理的折减系数情况下，可以简单快速地对缺少现场大型试验结果的具体工程部位实现岩体强度指标的估计，通过以上研究解决了工程岩体抗剪强度参数的评价问题；(4)通过结构面网络分形维数的研究，应用分形损伤耦合分析方法，研究了厂房区岩体的损伤特征，并首次引入"损伤度"的概念，建立了应用最大主损伤评价岩体质量的指标体系。

Results of analysis show that Generalized Paris Law can consider the complex crack propagation in the material of the pavement structure. The fatigue life of the pavement increases with increasing thickness of surface layer in a power function. Use of a thicker surface layer may extend the service life of the asphalt pavement. The fatigue life increases with decreasing modulus of surface layer in a power function with a negative exponent. However, since reduced modulus would scarify the structural strength and might cause rutting-related distress, caution should be taken when using low modulus materials for improving fatigue performance of asphalt pavements. The fatigue life increases with increasing modulus of base material in a power function. However, the fatigue life can not infinitely increases with increasing modulus of the base.

计算与分析表明：广义Paris公式可以考虑沥青路面结构内材料复杂的裂缝扩展：沥青面层的疲劳寿命随着面层厚度的增加以幂函数的形式增加，适当增加沥青面层厚度可以提高路面的使用寿命；沥青面层的疲劳寿命随着面层材料模量的降低以负指数的幂函数形式增加；由于材料模量的降低将牺牲路面的整体强度并可能引起路面车辙类损坏，以此提高疲劳寿命的方法应慎重对待；沥青面层的疲劳寿命随着基层材料模量的增加呈幂函数的形式增加，但由疲劳方程可以看出，寿命并不是随基层材料模量的增加而无限的增加，疲劳曲线在经过一个上升段后，逐渐趋于一个常数值，这说明，这时基层模量对寿命已不作关键性贡献；随着底基层厚度的增加，面层的疲劳寿命近似地呈线性函数增加，但效果并不很明显。

The shearing failure of structural plane is considered to be corresponding to the maximum of real contact area, a criterion is given to distinguish the shearing failure of structural plane and a new select method of shear strength is brought forward subsequently; Examine the influence of geometrical features and thickness of weak intercalation on the integrative strength of weak structural plane based on the composing of basic strengths, formative mechanism of shearing plane and failure pattern; and present the quantitative relation between the strength and thickness.

4详细研究了依附型滑动面中的硬性结构面和软弱结构面力学特性和破坏模式，对硬性结构面引入摩擦学中的粘着摩擦理论，着重研究结构面在剪切过程中实际接触面的变化规律，提出实际接触面积的最大点即为强度破坏点，并结合实际数据进行了验证；对软弱结构面则从其基本强度的组成、内部剪切面的形成机理和破坏模式入手，研究了结构面的几何特性、夹层厚度和强度关系对软弱结构面综合强度值的影响，并给出了定量关系式。

The research of this thesis is under the circumstances that the international shipping center of Shanghai builds Yangshan deep water port project, first of all, through its SWOT analytical method analyze Shanghai maritime affairs situation, maritime affairs office existing boat policy, Yangshan deep water port hydrometeorological situation, analyze the present main ship type, to explain the background of the choice the ship the small waterline, to put forward the necessity of building small water-plane area twin hull maritime affairs patrol ships. Then, it introduces the principle, characteristic of the small waterline, and has analyzed the domestic and international state of development of the SWATH ship, and conclude that it is feasible to build SWATH maritime affairs patrol ship technical, through the research and analyze of design at home and abroad,; Then it analyzed the application of the SWATH ship in maritime affairs manage both at home and abroad, put forward the preliminary scheme, and carry on research to the economic performance of technology of the scheme, through putting forward the preliminary model of plan of design to main yardstick and selecting type of host computer finally after relatively optimize, and confirm design specifications .

本文的研究是在上海国际航运中心建设核心工程洋山深水港的大前提下，首先，通过利用SWOT分析方法分析了上海海事局面临的形势，对上海海事局现有航政管理船舶现状进行分析，对洋山深水港海域的水文气象情况进行了调研，对当前主要船型进行分析，对选择小水线面船的背景加以阐述，提出建设小水线面双体海事巡逻船的必要性：接着，对小水线面船的原理、特点加以介绍，并对小水线面船国内外发展状况进行了分析，对国内设计建造小水线面双体海事巡逻船的技术可行性进行了研究分析，得出国内设计建造小水线面双体巡逻船在技术上是可行的；然后对国内外应用于海事管理等工作的小水线面船型进行分析，提出初步的方案，并对方案的技术经济性能进行研究，通过对主尺度和主机选型等进行比较优化后最终提出初步的设计方案模型，并确定设计任务书。

The research of the generation of FG is made by the derivation of the equations of FG tooth, contact lines on tooth in processing, plane of action and fillet surface, and by the visualization of contact lines, FG tooth surface and fillet surface.

在面齿轮齿面生成的研究中，推导了面齿轮的齿面方程、加工中的齿面接触线方程、啮合面方程和过渡曲面方程；对齿面接触线、面齿轮的齿面和过渡曲面进行了可视化。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。