非分布的

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component. For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper. For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space state informatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision. Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为（n-1）维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料（单质材料作为特殊的功能梯度材料看待）、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component.For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material .distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper.For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space stateinformatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision.Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为(n-1)维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料(单质材料作为特殊的功能梯度材料看待)、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

The conclusion is that inductive electromotive force, gotten from sensor with the distribution regularities of weighting function, is proportional to the average flow velocity in pipe and is not relevant to the distribution of flow velocity when flow velocity is non-central symmetry with the central axis.

得出按权重函数分布规律的传感器，在流速非中心轴对称分布时，感应电势仅与平均流速呈正比，而与流速分布无关的结论，从而从原理上解决电磁流量计了高精度测量的问题。

When it comes to the non-parameter density estimation technique for characterizing the region feature distribution, it also takes the collective distribution into consideration because of inaccurate segmentation.

此外，在应用非参数密度估计技术来构造语义类的特征分布时，针对区域分割的不精确性，该文还考虑了区域特征空间的总体分布因素，进而对区域的后验分布进行更可靠地估计。

Then, it studies the supply chain management system as a complex system to confirm the state existing during operating of the system. After that, it conducts a probability analysis on the state which the system located by applying supplement variable method, and establishes the model of distributed parameter system in a form of partial differential equations. Combining C0 ? semigroup theory in the functional analysis, it conducts a dynamic analysis on the established mathematical model. Using this method, it obtains the mathematical expression of the dynamic solution and the steady state solution, and proves the uniqueness, non-negativity and the asymptotic stability of the system solution. This dissertation applies the Matlab tool and uses two-step, three-step Simpson integral equation to imitate the condition of system solution. Then, it adds possible mode of failure and the optimization adjustment state to the system, based on which it has established the distributed parameter system model which is described by partial differential system of equations. Combining the functional analysis C0 ? semigroup theory, it studies the established mathematical model, and obtains the mathematical expression of the dynamic solution system and the steady state solution. It has proven the existing of uniqueness of the system solution, the asymptotic stability of system solution and the system solution. In addition, it has lying the theory rationale for further analysis and the research on the optimization of system.

本文首先简要综述了供应链理论、可靠性研究、鲁棒性研究以及供应链鲁棒性研究的现状；然后，将供应链系统作为一个复杂系统来分析，确定了系统运行过程中所经历的状态，通过引入补充变量的方法，建立了用偏微分方程组描述的分布参数系统模型，用泛函分析中的C_0 -半群理论得到了系统动态解和稳态解的数学表达式，证明了系统解存在的唯一性、非负性和指数阶渐近稳定性；并借助Matlab工具，利用二阶、三阶辛普森积分方程模拟系统解的性态，并给出系统动态解的仿真图；本文又对上述系统增加了系统可能失效状态和优化调整状态，并在此基础上建立了用偏微分方程组描述的分布参数系统模型，同样用泛函分析中的C_0 -半群理论对所建立的数学模型进行了研究，得到系统动态解和稳态解的数学表达式，证明了系统动态解存在的唯一性、非负性及渐近稳定性，为进一步分析和研究供应链优化奠定了理论基础。

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

Considering the difference of the use of clustering algorithms caused by the diffference of data distribution, on the base of the analysis of Kmeans algorithm, fuzzy Cmeans algorithm and genetic algorithm, a new algorithm was brought forward based on the genetic algorithm and the improved neighbor function criterion. In view of the intrinsic connection of the special and the advantage of genetic algorithms wholesearch strategy, to a certian extent, this new algorithm solve the problem about the uncompact and irregular data distribution.

考虑到空间数据分布特性差异造成聚类算法采用的不同，在比较分析K均值算法、模糊均值算法和遗传算法的基础上，提出了改进的近邻函数准则，并有机整合形成遗传算法与改进近邻函数准则的新算法，综合了遗传算法的全局性概率搜索的优点，并考虑到空间数据内在的连接方式，在一定程度上较好地解决了数据的非致密非规则分布问题。

Based upon the results of experiment and calculation of several representative unsymmetric composite laminates , the coupling characteristics of unsymmetric laminate was studied.

为了解决机翼的扭转发散、载荷重新分布及操纵反效和操纵效率等问题，基于非对称复合材料的各向异性及相对于普通复合材料更好的可设计性，以几种典型非对称复合材料层板的试验及计算为基础研究了非对称层合板的各种耦合特性，并进行了非对称复合材料机翼的设计，得到了满意的结果。

In the quasi-static area, the field distribution is almost the same as the static field; in the high frequency section, many high order modes occur, but the field uniformity is relatively better, and the field distribution is mainly the vertical polarization field; in the out of the vertical polarization area, the effect of high order modes is very serious so that the field distribution lost the property of vertical polarization.

在准静态区，场分布基本上与静态场相同；在高频区，出现了明显的高次模，但场均匀性较好，场分布主要是垂直极化场；在非垂直极化区，高次模影响非常严重，场分布失去了垂直极化的特性。

The average percent value of G C (49.3%) was less than that of A T (50.7%), there was a bias of the content of G, T in the third codon; The number of transition G-A and T-C were 22, 15 respectively, which were higher than that of transition A-G and C-T, the number of tranversion C-A, T-G is 2 respectively, and other tranversion patterns didnt occur; the probability of transition was higher than that of tranversion , Ts/Tv = 9.5-19, there was the highest number of transition in the third codon. The gamma parameter a of the lst,nd and 3rd codon positions were 0.00572,0.01237 and 1.05239 respectively, they showed that there was adifferent substitution rate at different codon position. Frequences of synonymous codon usage were relatively biased. The average rates of synonymous and nonsynonymous substitution were 0.0787, 0.0011 respectively, there was a significant difference between dS and dN (Z = 4.713, p.01), and the low ratio( CD = 0.0284 .3) of dN/dS ratio impled that there were selective constraints against the nonsynonymous sites in cyt-b gene, The distribution of nonsynonymous codon substitution pattern related to Grantharm distance indicated that the purified selection at 2nd codon positions was more intensive than that at 1st codon positions. The phylogenetic trees supported the view of the double origin of Chinese goose, which means that domestic Chinese goose was derived from Anser cygnoides and domestic European goose, and Yili was derived from Anser anser.

碱基含量分析可知，序列的G C含量(49.3％)＜A T含量(50.7％)，密码子第三位点的G、T含量都有较强的偏倚性；序列间G→A和T→C的转换数(22次和15次)高于A→G和C→T的转换数(10次和9次)，C→A、T→G颠换数均为2次，其余颠换模式均未发生；转换数明显高于颠换数，Ts／Tv=9.5～19，密码子第三位点的转换数最高，呈现了相当强烈的转换偏倚性；密码子第一、二和三位点的gamma分布参数α值分别为0.00572、0.01237和1.05239，表明密码子第一位点的替换速率变异最大，第二位点次之，第三位点的替换速率变异相对较小；编码同一氨基酸的同义密码子并非随机使用，表现出一定程度的使用偏倚性；同义替换速率和非同义替换速率分别为0.0787和0.0011，dS与dN值间的差异极显著(Z=4.713，p＜0.01)，而ω=0.0284，明显小于0.3，表明雁属鹅细胞色素b基因序列经历了中度净化选择作用；单步非同义替换(Sing-step nonsymonymous codon substitution，SSNCS)分布模式与Grantharm距离之间的关系说明密码子的三个位点所受的净化选择强度不同；构建的最大简约树与邻接树拓扑结构一致，支持中国家鹅的双起源学说，即除伊犁鹅外的其它中国鹅品种起源于鸿雁，伊犁鹅和欧洲的郎德鹅、莱茵鹅起源于灰雁。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。