静力学

Mechanical properties including the density MOR, MOE, shearing strength of birch and basswood LVL beams made by the bi-frequency hot press were tested by universal strength testing machine. The primary failure modes were discussed when LVL beams suffered the flexural and level shearing load.

在万能力学试验机上测试由高频热压方法制造的桦木和椴木单板层积梁的密度、静曲强度、弹性模量和水平剪切强度等力学性质；讨论LVL梁受弯曲、水平剪切载荷时的主要破坏形式并得出相关结论。

Firstly,according to the mechanical properties of soft clays and the traffic load induced dynamic deviator stress ,the static failure deviator stress was determined.

首先通过确定车辆荷载引起的动偏应力和土层的力学指标计算出静力破坏偏应力，然后通过考虑土物理力学性质、循环荷载次数的累积变形公式计算软土地基中各土层在车辆荷载作用下引起的残余累积应变，最后用分层总和法计算总沉降。

This article that focuses on the systematic and in-depth research in the current primal problem about abnormal burst pressure reservoir depress burst pressure has procured following main fruits:1 It forms the method which could obtain massive vertical static state mechanics parameters.2 In a foundation of acquisition of rock mechanics parameters,apply bent lamella that as mechanical model along with characteristic of actual geologic characteristics to analysis curvature for anticlinal strcture, get homologous tectonic stress value throug relation between the curvature and stress and different principal curvature in anticlinal structure,consequently set up laminational stress model for anticline reservoir. The block lamination for existed fracturing date has formed method of setting up mechanical model of lamination terrestrial stress by abtaining the block tectonic stress coefficients which are got by complex utilization test, laboratory test and fracturing date playback.3 Analysesing the main reason which lead to high burst pressure by considering the characteristic of reservoir geology,reservoir,and rock mechanics and reservoir damage,etc.Establishing burst pressure quantitative prediction model which provide gist for depressing construction risk and optimizing construction craft under the condition of open hole completion ,gun-perforated completion and damaged reservoir.4 Provding theoretical basis for interpreting acidification pretreatment which could depress busrt pressure by finding the relation between the influencing factors and rock machanics parameters and analysing the factors that have effect on rock mechanics parameters. Expounding the mechanism of reaction of mixed monomineral and acid from the angle of microcosmic element, evaluating quantitatively acid sensilility of different kinds of mineral effectively, and determing the first-order reaction dynamical equation of each mineral.5 Revealing rock mechanics property chage as a result of acid flooding in different condition by sandstone traumata experiment in different temperatures which combined with rock mechanics triaxial stress experiment.6 Associating damage mechanics with sandstone acidizing, established sandstone damage mechanics model in the foundation of the recognition on the rock mechanics parametric variation which is caused by acid-rock reaction in both macroscopic view and microscopic view ,also demonstrated those processes and quantitative estimated the acid busrt pressure to direct the site operation.

本文针对目前异常破裂压力储层降低破裂压力的主要问题展开较为系统和深入的研究，取得了以下主要成果：1形成了利用测井资料，结合室内岩芯测试结果，获取静动岩石力学参数的相关性特征，从而获得纵向上大量静态力学参数的方法。2在获取了岩石力学参数的此基础上，利用弯曲薄板作为力学模型，结合区块实际地质特征对背斜构造进行曲率分析，通过曲率与应力的关系，利用背斜构造不同部位的主曲率求得相应的构造应力值，从而建立起背斜储层的分层应力模型；对已有压裂资料的区块分层，形成了综合利用测试、室内实验、压裂资料反演获得该区块构造应力系数，建立起分层地应力的力学模型的方法。3综合考虑储层地质、油藏、岩石力学特性和储层伤害等因素，分析造成高破裂压力的主要原因，综合利用岩石力学、弹性力学等知识，建立了裸眼完井、射孔完井条件下以及储层受到伤害后的储层破裂压力定量预测模型，为降低施工风险和优化施工工艺提供了依据。4完成了物性、岩性影响岩石力学参数的因素分析，找出了各影响因素和岩石力学参数之间的关系，为从机理上解释酸化预处理降低破裂压力提供了理论基础；从微观元素的角度阐述了单矿物与酸反应的机理；并在此基础上，有效评价了各种矿物的酸敏感性，定量确定了岩石中各矿物的一级反应动力学方程。5完成了不同温度下的酸液类型、酸液浓度、注酸量等一系列砂岩损伤实验，结合岩石力学三轴应力实验，系统揭示了在不同条件下注酸而引起的岩石力学性质变化。6将损伤力学与砂岩酸化相结合，在宏观、微观两个方面认识酸岩反应引起岩石力学参数变化基础上，建立了砂岩损伤力学模型，并对其进行验证，在此基础上定量计算酸化后的破裂压力，有效指导现场施工

On the basis of analyzing forces on the self-supported column,the superposition method in mechanics of material was used to calculate the steady deflection at top of the high column under both of weight and distributed wind pressure.

在对自支承式塔设备建立合理的力学模型并进行受力分析的基础上，采用材料力学中的叠加法，计算了高塔设备在均布风载荷、自重联合作用下的塔顶静挠度，提出对于自重和长细比均较大的高塔，塔体自重对塔顶挠度的影响不可忽视，并推导出了计算这种影响的表达式。

First, this paper presents three girders model with double cable planes which main girder and side girder is connected by rigid arms, analyzes the dynamic characteristic of Yonghe cable-stayed bridge and obtains its natural vibration modes (i.e., frequency, damping values and the mode shapes ) by ANLSIS structural analysis program and uses these parameters as dynamic dactylogram of the intact case of cable-stayed bridge. Using the passage of random as the ambient vibration ,the dynamic properties of Yonghe Bridge is measured and the modal parameter of its 15 years after is identified and used as dynamic dactylogram of the damaged case. By the finite element analysis and locale vibration test, damaged and undamaged modal parameter is analyzed and curvature mode shape, which is sensitive to damage state, is introduced as possible candidate for identifying and locating damage in the cable-stayed bridge. Selecting the branch of part measured point from modal parameter, this paper deduces the damaged index which can detect the possible damaged location of the cable-stayed bridge deck and identifies the damaged region and degree for Yonghe Bridge. For the purpose of structural condition monitoring in in-situ , from another viewpoint, this paper introduces the method called the best optimization vector to detect damaged location and degree. The accuracy and reliability of the method presented in this paper are demonstrated by static analysis and test and the healthy state of Yonghe Bridge can be evaluated.

建立了双索面通过刚臂与主梁及边梁相连的三梁式力学模型，采用ANSYS结构分析程序对永和斜拉桥进行动力分析，对其振动模态参数进行识别，以此作为斜拉桥完好状态下的动力&指纹&；采用自由交通流作为环境振源，对永和斜拉桥动力特性进行测试，识别出永和斜拉桥使用15年后的模态参数，确立了破损状态下的动力&指纹&；利用有限元分析、现场振动测试，对破损前后的模态参数进行分析，提取对破损状况较敏感的模态曲率作为斜拉桥破损诊断的参数；并从模态参数中选取部分点的分量，导出可以指示斜拉桥桥面大概损伤位置的Index损伤指标，识别出斜拉桥发生破损的区段及破损程度；考虑大型斜拉桥在线监测要求识别破损的具体位置，从另一角度提出采用最优矢量法具体确定破损发生的位置及程度；为验证本文研究成果，对永和斜拉桥进行静力分析及静力测试，对其健康状况提出可靠的评价。

The superposition method in mechanics of material and a MATLAB Procedure was used to calculate the top deflection of tall tower under both of weight and wind pressure.

采用材料力学的叠加法和自编的MATLAB程序，计算了高塔设备在风载荷和自重联合作用下的塔顶静挠度，并推出了考虑自重影响时塔顶静挠度的计算公式。

In this paper, on the basis of the description of the pile-driving process and the dynamic analysis of the pile and the HSPD, the relationship between the frequency and the pile-driving force has been established under the conditions of the pile strength and the HSDP working requirements. The frequency character of the ZYB200B HSPD system has been analyzed quantitatively in the vibrancy pile-driving process, therefore the frequency range and the best available frequency have been obtained.

本文首先通过对压桩过程的描述和桩与液压静力沉桩机的力学分析，确立了液压振动压桩在桩的强度条件下和液压静力沉桩机工作要求下的压桩频率与压桩力幅值之间的关系；定量分析振动压桩时系统的频率特性，得出了ZYB200B型液压静力沉桩机振动压桩时压桩频率的取值范围和系统能得到的最佳频率值。

Performance of kinematical and dynamic characteristics of the VEL were simulated. Mathematical model of the whole working process of the VEL was established to integrate the simulation processed.

然后，简单介绍了虚拟样机技术与ADAMS开发平台，对优化设计得到的弹射机构进行验证，分析其静力学、运动学和动力学性能，仿真其运动和工作过程，采用ANSYS软件分析其应力和应变情况。

The side panel and the lightbulb STATICs are used as placeholders for retrieving the RECT.

在侧板和灯泡静力学被用作检索整流器占位符。

A radial basis function with polynomials interpolation method and a Heaviside step function are chosen for establishing local Petrov-Galerkin formulations of hyperelasticity.

提出了求解超弹性材料静力学、动力学、静态接触和动态碰撞等问题的局部Petrov-Galerkin方程。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。