镀锌

The result indicate that: the electrodeposition of zinc on nickel and tungsten substrates involves instantaneous three-dimensional nucleation. The coating is the best when the current density is 4mA/cm2 and the temperature is 80 ℃. The coating by the method of the impulse electrodeposition is better than the direct current electrodeposition. Especially when f is 100Hz, ton/toff is 2/8 and J is 8mA/cm2, the coating is clean and uniformity. The crystal size is nearly 0.3μ m .

结果表明：阴极反应为准可逆反应，锌离子在镍电极和钨电极上形核是三维瞬时形核半球形扩散长大过程，直流电流密度为4mA/cm2，温度为80 ℃时，镀层质量最好；脉冲电沉积得到的镀层要优于直流电沉积得到的镀层，尤其在脉冲宽度为2ms，脉冲间隔为8ms，电流密度为8mA/cm2时，得到的镀层光滑而均匀，颗粒大小接近0.3μm。

In this study, the ZnO thin films were deposited onto Si (100) substrate by ratio frequency sputtering with various RF power at 50, 100, 150, 200, and 300 W and the surface morphologies, crystalline structural, and nanomechanical properties of ZnO thin films were examined.

本研究利用射频磁控式溅镀(RF-sputtering)法於矽(100)基材上沉积高品质氧化锌薄膜，在实验中改变溅镀功率(50、100、150、200、以及300 W)来观察其对氧化锌薄膜表面形貌、晶格结构、及奈米机械性质的影响。

Customer demand for faith, and a variety of surface treatment products, such as: rolling, hanging chrome, white nickel, black nickel, black zinc, color zinc, blue zinc, white zinc, imitation gold, bronze, pearl nickel, pearl chromium.

秉着客户之需求，并对产品进行多种表面处理，如：滚、挂镀铬、白镍、黑镍、黑锌、彩锌、兰锌、白锌、仿金、古铜、珍珠镍、珍珠铬等。

Based on practice,the author of this essay comes up with his own opinions about electroplating and reworking of unqualified zinc alloy products,and offers some experience on un-plating chemically and electrochemically.

本文在实践的基础上对锌合金工件不合格镀层返镀和修复提出了自己的看法，提供了化学退镀和电解退镀等方面的修复经验。

The new bath can plate directly on steel, copper, brass, zincated aluminum and most high quality properly prepared zinc diecastings in both rack and barrel installations. The copper deposit which plates must be fine grained, smooth, dense and ductile.

该工艺要求能够在钢铁、铜、黄铜、锌合金以及铝合金上面能直接电镀而得到细致、均匀、韧性好、结合力强的铜镀层，而且镀液也必须能适合挂镀、滚镀等多种电镀方式的需要。

The effects of cerium additive on the Zn-Fe alloy electrodeposition bath and coating were investigated.

研究了铈对电沉积锌-铁合金镀液及镀层性能的影响，通过分散能力、阴极极化曲线测定，得出在镀液中添加一定量的氯化亚铈能改善镀液性能。

Brief:Through the HKS-315 alkaline zinc-nickel alloy technology to use, bath and coating performance of the statement that the process easy to control, mature stability, and can be highly anti-corrosion coating to the conclusion.

通过对HKS-315碱性锌镍合金工艺使用方法、镀液性能以及镀层性能等方面的陈述，得出该工艺容易掌控，成熟稳定，并能得到高防腐蚀能力镀层的结论。

Scrap Metals: Copper, phosphor copper, brass, Nickel Silver, Bronze, mechanical copper, copper-nickel alloy plating, brass-plated white , motor copper, copper wire, copper scrap, environmental protection, tin, silver tin, air-conditioning aluminum (crumbs, the machinery aluminum, 304 # stainless steel, zinc alloy, playing Word lead, gold, silver, nickel scrap, scrap titanium, tungsten steel, precious metals, molybdenum wire, etc.

废金属：（紫铜、磷铜、黄铜、洋白铜、青铜、机械铜、镀白铜、镀白黄铜、马达铜、铜丝、铜屑、环保锡、含银锡、空调铝、机械铝、304#不锈钢、锌合金、打字铅、镀金、镀银、废镍、废钛、钨钢、钼丝贵重金属等） 2。

The Zn-AI alloy coat steel wire has higher anti-corrosion properties than the Zn-coat steel wire.

锌铝合金镀层钢丝具有比纯锌镀层钢丝耐蚀能力高的优点。

I Division, as aluminum plate, sheet and pre-processingmetal plates (chrome plate, copper plate, aluminum plate, nickel plate and color plate, etc.) an agent has in the market more competitive according to customer's mode of operation to carry out "transgenic plant" or Order business customers greatly reduce manufacturing costs and improve production efficiency.

我司作为镀铝板、镀铝锌板及预处理金属板(镀铬板、镀铜板、氧化铝板、镀镍板以及彩色钢板等)的一级代理，在市场上有较大的竞争力，可根据客户的经营方式开展&转厂&或订货业务，极大降低客户的制造成本和提高生产效率。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。