镀

Researches on the process of electrodeposited Zn-Fe-SiO2 composite coatings indicated that composite coatings with different contents could be obtained by means of appropriate parameters.

电沉积Zn-Fe-SiO_2复合镀层的工艺研究表明，通过采用不同的工艺条件，可以获得成分不同的复合镀层。

In order to study the mechanism of electrodepositing Zn-Ni alloy coatings,the curve of cathodic polarization of electrodepositing Zn-Ni alloy coatings was determined by changing potential in the system of three electrodes,and the influence of concentration of additive on the cathodic polarization was studied.

为了研究Zn-Ni合金镀层的电沉积机理，采用三电极体系下的动电位法测定了电沉积Zn-Ni合金镀层的阴极极化曲线，并研究了添加剂浓度对阴极极化的影响。

In order to study the mechanism of electrodepositing Zn-Ni alloy coatings, the curve of cathodic polarization of electrodepositing Zn-Ni alloy coatings was determined by changing potential in the system of three electrodes, and the influence of concentration of additive on the cathodic polarization was studied.

为了研究Zn-Ni合全镀层的电沉积机理，采用三电极体系下的动电位法测定了电沉积Zn-Ni合金镀层的阴极极化曲线，并研究了添加剂浓度对阴极极化的影响。

Effect of additive ZFS on SiO2 content in the coating was studied, and the action mechanism of additive ZFS during composite electrodepositing was analyzed.

结果表明：ZFS共沉积促进剂可以明显提高SiO2微粒在镀层中的沉积量，并且无需对SiO2微粒进行镀前特殊处理。

Zinc plating andnickel (16%) alloy plating were prepared on ferrous substrate by electrodepositing in a sulfate bath.

锌镍合金层具有优异的耐蚀性，从全硫酸盐体系中用电沉积的方法制备了纯锌镀层和锌镍合金镀层。

The optimum bath components and operation conditions of electrodepositing Zn-Mn alloy from a sulfate-citrate bath were studied.

研究了硫酸盐-柠檬酸盐体系电沉积锌锰合金的镀液组分及工艺条件，讨论了主盐浓度、络合剂浓度、电流密度及pH等对合金镀层中锰含量的影响。

A new process electrodepositing antiwear Fe—Ni—P alloy was developed in this paper. The stress has been put on resolving bath oxidation and a series of problems of the coating quality which Fe〓 would bring in existence of large amount of iron in bath.

立足于摩擦表面改性和非晶合金的特殊性能，开发研究了电沉积Fe-Ni-P耐磨合金新工艺，着重解决镀液中大量铁存在时的氧化以及三价铁离子给镀层质量带来的一系列问题。

The experimental results suggest that the bonding strength of nickel-lanthanum electrodeposits is higher than that of bright nickel.

实验结果，镍－镧镀层与基体的结合强度高于亮镍镀层与基体的结合强度。

In order to further improve the properties of tin electrodeposits, a multifunctional sulfate tin plating additive was developed.

为进一步提高镀锡层的性能，研制出一种多功能硫酸盐镀锡添加剂。

The effect of the concentrations of main salts and the process conditions on the compositions, and the morphologies of Sn-Ag-Cu alloy electrodeposits were investigated by X-ray fluorescence and scanning electron microscopy.

采用X射线荧光光谱仪和扫描电子显微镜研究了镀液中主盐浓度和电镀工艺条件对镀层的组成和形貌的影响。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。