铸钢

Yang Tongde in casting machinery More than 20 years, in the country is recognized as "casting machine", and win credibility, reputation as a pragmatic, the foundry industry has accumulated more than 10 years practical experience and mastery of the domestic industry-leading technology with the design, technology, electronics, computers and other sectors Experts and senior technician and a perfect technology, with rich practical experience of skilled workers and the installation and after-sales service team, the company has excellent production and operation mechanism, in technical research and development, non-standard production capacity, quality, speed and other aspects of acceptance has created A number of the first, summer 2005, the Company at the same time, installation, commissioning of the three pretreatment plate production line: Baode Jinan Steel, Wuhan and Jinan Iron and Steel 9-, three projects on the same day through acceptance, and created a cast Pretreatment-sector and the number of lines installed speed record companies are now casting a domestic machinery equipment engineering centers, is the casting of China's largest machinery industry production and sales, the most species-wide, casting the highest technological content-production bases and technology development center.

青岛德盛利机械制造有限公司是由原青岛华青工业集团铸造机械有限公司的创始人、董事长杨同德先生在原公司职工基础上优化组合后改制企业；董事长杨同德先生从事铸造机械二十余年，在国内被公认为"铸机王"，并赢得诚信、务实的美誉，积聚了铸造行业有十几年实践经验并掌握国内同行业领先技术的设计、工艺、电器、计算机等行业的专家和高级技师并拥有技术过硬、具有丰富实践经验的技术工人和安装、售后服务队伍，公司具有优越的生产、经营机制，在技术研发、非标生产能力、质量、验收速度等方面创造了多项第一，2005年夏，本公司在同一时间内安装、调试了三条钢板预处理生产线：济南鲍德钢构、武汉九通和济南钢铁，三个项目在同一天通过验收，创造了铸机界预处理线安装数量及速度记录；公司现已形成国内铸造机械成套装备工程中心，是中国铸造机械行业产销量最大、品种最全、技术含量最高的铸机生产基地和技术开发中心。

For KISC, the technology shall firstly use high-phosphorus ironstone efficiently which can not completed by the current picking technology or blast furnace process, to greatly reduce ironstone cost that occupies the most proportion of iron and steel production cost, easy cost pressure caused by international and domestic shortage of production materials, induce transportation risk, to assuringly supply KISC with a great deal of cheap raw materials and create great economic profit; Secondly it shall promote KISC to update its products, especially high-added-value products of lowest phosphorus and lowest sulfur, to enhance its ability to adapt market and gain profit; Thirdly it shall improve technical and economic indexes of blast furnace and converter, and be helpful for efficient blast smelting and less-slag melting of converter process; Furthermore the technology shall greatly promote the stable operation of melting process and the control of the production of high-temperature and high-quality casting blank, to realize efficient continuous casting and continuous casting and rolling to improve KISCs production intensification; Finally the technology shall distribute melting functions and optimize production processes, to improve the auto-control of melting and continuous casting, to realize the integrated management of technology, equipment, production organization and management, logistic management, and production running of smelting, continuous casting and rolling.

对昆钢而言，该技术的应用，首先可以经济有效地实现现有采选技术及高炉冶炼所不能完成的高磷铁矿石的利用，大幅度降低在钢铁生产中占绝大比例的原料成本，缓解国际国内生产原料紧张而造成的成本压力，为昆钢创造巨大的经济效益；其次可以促进昆钢产品的升级换代特别是高附加值超低磷、超低硫钢种的开发，增强昆钢的市场适应能力和效益创造能力；再次可促进高炉及转炉技术经济指标的改善，降低生产成本，且利于转炉生产实现高效吹炼和少渣冶炼；此外，该工艺能显著提高冶炼环节的平稳顺行及高温、高质量铸坯生产的可控程度，可实现高效连铸和连铸连轧生产，提高昆钢生产的集约化程度；最后，该工艺能实现冶炼功能的分工和生产流程的优化，可提高昆钢炼钢与连铸生产的计算机自动控制程度，有效促进炼钢—连铸—轧钢的工艺、设备、生产组织和管理、物流管理、生产操作等环节的一体化管理的实现。

The results show that the equiaxed zone ratio of the casting billet is greatly increased,with its soidification structure is obviously improved,and the momentum values of the electromagnetic forces both parallel to and perpendicular to the direction of the traveling magnetic field pulsate periodically with time.

采用三相通入不同电流的非平衡线性电磁搅拌技术进行了铸坯的静态浇铸实验，并对电磁搅拌过程中钢液内的电磁力各分量的瞬时值进行了理论分析·结果表明，当采用将电磁搅拌器的三相通入不同电流的非平衡线性电磁搅拌时，在钢液内所产生的电磁力是脉动的，其大小呈周期性变化，尤其是垂直于磁场运动方向上的电磁力，其脉动的幅度很大·由此认为，当采用将搅拌器的三相通入不同电流的非平衡线性电磁搅拌时，所产生的垂直于磁场运动方向上的脉动电磁力是提高等轴晶比率，改善铸坯凝固组织的一个重要原

Therefore, due to the fact that the (111) pole density in the subsurface of decarburized bands still have a higher intensity, adding Mo into Hi-B steels could lower the slab reheating temperature.

本文采用X射线极密度和取向分布函数方法，证明含Mo Hi-B钢采用1310℃低温铸坯加热时，其热轧板表层织构特征与不含Mo并在1380℃高温铸坯加热时相似，为典型的剪切形变织构，两者的热轧板与脱碳板表层织构特征也极为相似，而含Mo Hi-B钢在1380℃铸坯加热时却没有以上这些相似性。

The microsturcture characteristics of M2 cast-strip were studied with such experimental methods as metallographic analysis, SEM, XRD and TEM[0]. The effect of sub-rapid solidification on the size, type and distribution of eutectic carbides in M2 cast-strip was analyzed. The effect of heat treatment temperature and its holding time on the eutectic carbides in M2 cast-strip was explored. The eveolution of metastable phase of M2C eutectic carbide during the heat treatment period and the decomposition dynamics concerned were researched. The M2 cast-strips were rolled into thin strips and the effect of deformation ratio on carbides in M2 cast-strip was examined. Then these thin strips were comparied with those that were produced by conventional technology on carbide, hardness, red-hardness and bend strength. At last the rolled M2 cast-strips were made into saw blades and their cutting performance was experimented on in tools factories and then compared with that of similar products produced by conventional technology.

采用常规金相、扫描电镜、X射线衍射及透射电镜等实验研究了M2高速钢铸带的凝固组织特征，分析了亚快速凝固对铸带中的共晶碳化物的析出类型和尺寸以及分布的影响；探索了后续热处理温度和保温时间对铸带碳化物组织的影响规律，分析了铸带中的亚稳相M2C共晶碳化物在热处理过程中的分解情况以及分解动力学；将铸带热轧成薄带，研究了压下率对铸带碳化物组织的影响，并将热轧薄带与常规工艺生产的相同规格的M2高速钢薄带在碳化物组织、硬度与红硬性以及抗弯性能等方面进行了对比；将热轧薄带加工成机用锯条后在工具厂进行了锯切性能试验，并与常规工艺生产的同类产品进行了使用性能对比。

The microstructure and properties of new type meta bainited cast steel are studied.

研究了新型准贝氏体铸钢的组织与性能。

A theoretical analysis and experimental research on the performance of cast steel joints subjected to cyclic loading is carried out in this paper.

本文对反复荷载作用下铸钢节点的受力性能进行了有限元分析与试验研究。

The company has cast iron, cast steel, metal processing, assembling a full set of production equipment.

本公司拥有铸铁、铸钢、金加工、装配全套生产设备。

It on the low-carbon steel, cast steel, stainless steel, copper and other metals cutting.

它能对低碳钢、铸钢、不锈钢、铜和其它金属进行刨削。

The finite element analysis and experimental study on bearing capacity of cast steel joint under static load are included in this paper.

本文对静力荷载作用下铸钢节点的承载力进行了有限元分析和试验研究。

They weren't aggressive, but I yelled and threw a rock in their direction to get them off the trail and away from me, just in case.

他们没有侵略性，但我大喊，并在他们的方向扔石头让他们过的线索，远离我，以防万一。

In slot 2 in your bag put wrapping paper, quantity does not matter in this case.

在你的书包里槽2把包装纸、数量无关紧要。