铝的

A mathemetical model of magnetic field in electromagnetic separation of inclusions from molten aluminum under rectangle coil and 50Hz current is presented according to the magnetic vector potential integral equation and the basic theory of magnetohydrodynamics. The magnetic field distribution in the gap of coils is simulated by the model and the actual magnetic field distribution also is measured. The experimental results show that the magnetic field distribution in the gap of coils is uniform and is consistemt with the model simulation. The magnetic field designed accord the simulated result is proved suitable in the practice.

摘 要：根据电磁流体力学的基本理论，利用矢量磁位积分，建立了在采用矩形电磁线圈和工频电源的条件下电磁分离铝熔体中夹杂的电磁场数学模型，模拟计算了电磁感应线圈气隙中的磁场分布状态，同时对制做的感应线圈的实际磁场进行了测量模拟计算磁场的分布状态与实际磁场的测量结果基本一致，都表明在电磁感应线圈气隙中磁场分布均匀，可以进行分离铝熔体中的非金属夹杂。

Complex flocculant PASS has the abilities of neutralizing electric charge and flocculating. The experimental results show: it is feasible that the emulsion wastewater can be treated into qualified discharging water. The dosage of flocculants and pH value have been optimized by coagulation experiments. In addition the mechanism for emulsion wastewater has been studied by using Perron timed complex colorimetric method and neutralization method. Aiming at characteristics of high concentration and high CODCr emulsion wastewater the technology that emphasized on coagulation-precipitation twice has been proposed in this paper.

本文采用复合型絮凝剂处理乳化液废水，研究结果表明，乳化液废水的处理过程包括凝聚脱稳及吸附絮凝，其中絮凝是决定混凝效果的关键性步骤，复合型絮凝剂聚硅酸硫酸铝是一种既具有较强的电中和能力，又具有优异的絮凝性能的无机混凝剂，通过对乳化液废水药剂筛选实验，实验结果表明聚硅酸硫酸铝对乳化液废水是比较合适的混凝剂，并确定了药剂的最佳投药量、最佳pH值条件等操作参数，针对乳化液废水的特点，综合国内外研究成果和经验，提出了二次混凝沉淀处理方案，该方案具有处理设备结构简单、运行管理简便等优点。

The main factor affecting the frequency characteristic were given as the following:the coefficient of corrosion of the Al foil surfaces the figure of the hole of scorrosion,and the character of the oxide film on the surface of the anode and cathode;the fabric of the unimpregnated liner in the capacitor,as well as the resistance and steeping of the working electrolyte and the construction of the capacitor.

影响频率特性的主要因素有：阴极和阳极铝箔表面腐蚀系数的大小及腐蚀坑洞的形状；阴极和阳极铝箔表面氧化膜的性质；电容器中衬垫纸的构造；工作电解液的电阻和浸渍情况以及电容器的内外结构尺寸等。

We assumed that after the PACl〓 was dosed into water, its hydrolysis-aggregation-precipitation process combined the most popular"core-link"or hexameric ring scheme and the more recent model of polynuclear formation involving a typical specie of tridecameric,〓. The integrate pattern can nicely explained the phenomena.

另外，研究表明，PACl中预制的Alb形态和铝盐在混凝过程投加入水后形成的Alb形态在稳定性上有很大的区别，这无疑是由于它们的化学结构上的不同造成的，推测铝盐在投加入水后，其水解聚合过程按&六元环&模式〓和&核环&模式〓结合进行，这种综合模式可以很好的解释实验中的现象。

The method adopts the following steps: after mixed, phosphorus source, silicon source, aluminum source, an organic template agent, water and a precursor of the SAPO molecular sieve are hydrothermally crystallized for at least 0.1 hour at the temperature ranging from 110 to 260 DEG C to obtain the SAPO molecular sieve; wherein, the preparation method for the precursor of the SAPO molecular sieve has the following steps:, the molar ratio is 0.03 to 0.6 R:(Si0.01 to 0.98: Al 0.01 to 0.6: P0.01 to 0.6): 2 to 500 H2O; wherein, R stands for mixture solution of raw materials which is blended by the phosphorus source, the silicon source, the aluminum source, the an organic template agent and water of the template agent;, the mixture solution of raw materials prepared in step reacts at the temperature which is at least 50 DEG C lower than the crystallization temperature for at least 0.1 hour.

本发明通过采用包括以下步骤：将磷源、硅源、铝源、有机模板剂、水和SAPO分子筛前驱体混合后在110～260℃的温度下水热晶化至少0.1小时获得SAPO分子筛；其中SAPO分子筛的前驱体的制备包括以下步骤：将摩尔配比为0.03～0.6R∶(Si0.01～0.98∶Al0.01～0.6∶P0.01～0.6)∶2～500H 2 O，式中R代表模板剂的磷源、硅源、铝源、有机模板剂和水混合成原料混合液；将步骤制备的原料混合液在低于晶化温度至少50℃的温度下反应至少0.1小时的技术方案较好地解决了该问题，可应用于含氧化合物制烯烃催化剂的制备过程。

By SEM, different component have great effect on flocculent structure. Zn have trend to form network, Al and Mg form sheetlike to around. Structure characterizations of PSAZ and PSMZ is different of common IPF, it has nicer flocculation efficiency and stability.

扫描电镜分析表明不同组分对絮凝剂结构具有较大的影响，发现增加锌的含量，有利于生成网状物，铝、镁的向四周发展的片状结构，聚硅酸铝锌和聚硅酸镁锌的结构不同于一般的絮凝剂，其特殊的片状结构决定了絮凝的优良的絮凝效果。

In order to improve the welding quality between this two kinds of materials,we explore experimentally the characteristics and mechanical properties of the friction welded joints of LF6 anti-rust aluminum and HR-2 anti-hydrogen stainless steel.Magne- sium in LF6 aluminum alloy is easy to form the brittleness intermetallic compounds on the fr...

经焊前对焊接界面的特殊处理，清除了LF6与HR - 2待焊接表面上的氧化膜，并采用以纯铝为介质的三元摩擦焊接工艺方法，避免或减少焊接界面上金属间化合物的生成，所焊接制品的抗拉强度可以达到或超过LF6防锈铝母材所要求的供货状态σb≥ 2 70MPa的技术要求。

The closed-cell aluminum foam was fabricated by direct foaming in melt. Through sampling aluminum foam in different stages the cross-section of them were observed and analyzed. It was explained how TiH_2 was decomposed after entered into the melt, how initial bubbles were formed and what was the state that generated bubbles and undecomposed TiH_2 lay in.

以熔体直接发泡法制备闭孔泡沫铝材实验为基础，通过获得不同实验阶段的泡沫铝样品，以及对实验样品切面或断面进行观察和分析，描述了在熔体发泡法制造泡沫铝过程中TiH2加入熔体后的分解过程，原始气泡的形成方式以及产生的气泡和未分解TiH2的存在状态；解释了气泡进一步长大的原因和未分解的TiH2如何释放气体；表述了气泡的合并和无泡层的形成。

MgO-C brick has a good erosion resistance but Al〓O〓-C brick is better. Corrosion mechanism for refractory without carbon is that FeO and oxides of molten slag take place chemical reaction with constituents of refractory and forming low fusing point compounds to be dissolved in molten slag. For those refractory containing graphite carbon is to be decarburized in advance and to form decarburizing layer and metamorphosis layer. The subsequent corrosion is decarburizing and taking chemical reaction to form low fusing point compounds and dissolved in molten slag at the same time.

铁浴中硅和钛的扩散是影响铁浴及熔渣与耐火材料作用的重要因素，耐火材料中添加的TiO〓和SiC受熔渣氧化和侵蚀，将被部分还原形成Si，Ti向铁浴中扩散，Si、Ti在铁浴中的扩散研究结果是： D〓=1.84×10〓exp（－5988.7/T） cm〓/S E〓=49766 J/mol D〓=7.76×10〓exp（－53225.5/T） cm〓/S E〓=442304 J/mol 铁浴式熔融还原熔体对粘土砖，高铝砖，镁砖的侵蚀速度很高，镁碳砖抗侵蚀能力比前几种耐火材料强，但不如铝碳砖；对不含碳耐火材料在熔体中的侵蚀是熔渣中FeO及其它氧化物与耐火材料组分的化学反应形成低熔点物熔蚀进入渣相，产生损毁。

The second consideration is properly connecting the ends of the aluminum magnet wire. The reason for this goes back to your high school chemistry course. You may remember that aluminum oxidizes much faster than other metals—in fact, if exposed to air, powdered aluminum will completely oxidize in a few days, forming a fine white powder.

第二个需要考虑的是铝漆包线的正确的端接，其原因你可以回忆一下你高中的的化学课程，你应该还记得铝比是其他金属更容易氧化的，如果暴露在空气中，铝粉会在几天内完全氧化，变成了很细的白色粉末。

Do you know, i need you to come back

你知道吗，我需要你回来

Yang yinshu、Wang xiangsheng、Li decang,The first discovery of haemaphysalis conicinna.

1〕 杨银书，王祥生，李德昌。安徽省首次发现嗜群血蜱。