金属板

A steel plate having a tensile strength of at least about 930 MPa (135Ksi), a toughness as measured by Charpy V-notch impact test at least about 120 joules (88 ft-lb), and a microstructure comprising at least about 90 volume percent of a mixture of fine-grained lower bainite and fine-grained lath martensite, wherein at least about 2/3 of said mixture consists of fine-grained lower bainite transformed from unrecrystallized austenite having an average grain size of less than about 10 microns and comprising iron and specified weight percentages of the additives: carbon, silicon, manganese, copper, nickel, niobium, titanium, aluminum, calcium,rare earth metals, and magnesium, is prepared by heating a steel slab to a suitable temperature; reducing the slab to form plate in one or more hot rolling passes (10) in a first temperature range in which austenite recrystallizes; further reducing said plate in one or more hot rolling passes (10) in a second temperature range in which austenite does not recrystallize, quenching (12) said plate to a suitable quench stop temperature (16); and stopping said quenching and allowing said plate to air cool (18) to ambient temperature.

一种钢板，其抗拉强度至少约930MPa135ksi），在－40℃（－40°F）下，采用夏氏V型缺口冲击试验测定的韧性至少约120焦耳（88英尺－磅），并且其显微组织包含至少约90％体积的细晶粒的下贝氏体和细晶粒的板条马氏体的混合物，其中该混合物的至少约2／3由从平均粒径小于约10微米的未再结晶奥氏体转变而来的细晶粒的下贝氏体组成，而且，其中所述的钢板包含铁和特定重量百分比的添加元素：碳、硅、锰、铜、镍、铌、钛、铝、钙、稀土金属和镁，所述钢的制备过程为：将一钢板坯加热至一个适当的温度；在奥氏体可发生再结晶的第一个温度范围内，采用一个或多个热轧道次（10），将所述板坯轧制成板材；在奥氏体不发生再结晶的第二个温度范围，采用一个或多个热轧道次（10）进一步轧制所述板材；将所述板材淬火处理（12）至一个适当的淬火终止温度（16）；停止所述淬火处理并将所述板材空冷（18）至室温。

C.Triple Eccentric Metal-seated Butterfly Valve adopts a double-eccentric and a Sideling Cone surface.

第三、斜锥面金属密封蝶阀设计采用了一个双偏心和一个斜锥面密封结构，实现蝶板在开启瞬间，密封面随即分离，关闭接触时，密封圈挤压后，自身微量变形，实现密封

The technique can be extensively applied to manufacture equipments of optoelectronics and semiconductor industries such as the chamber, susceptor, and cooling plate.

中文摘要本实验采用真空硬焊制程来接合铝合金与无氧铜两种金属材质，其应用於腔体、加热器、冷却板等光电与半导体制程设备。

Mainly engaged in manufacture of various machine parts: Machine Tools Guide Shield, clothing cable sheath with catheter, engineering towline, aluminum trailers chain, APS towline, metal hose, work lights, protective kits, cooling, machine tools Sizing Block, groove board, aluminum blinds, electrical appliances, such as 30 years ago, that host more than 100 facilities and equipment manufacturers to provide a repair various specifications of products for CNC machine tools guide protection, research and development have made great contributions.

主要经营制造加工各种机床部件：机床导轨防护罩，穿线缆用导管护套，工程拖链，钢铝拖链，APS拖链，金属软管，工作灯，防护套，冷却管，机床垫铁，槽板，铝帘，起重电器等。30年来，以为100余家主机生产厂商配套及设备维修提供了各种规格的产品，为数控机床导轨防护，研制开发作出了很大的贡献。

When the concentration of zinc nitrite is lower than 0.1 M,(002) is the prior face for zinc oxide. As the concentration raise, the other kinds of crystal face would appear. Among those data,(002) grows the best when the concentration of zinc nitrite is 0.06 M. We add lactic acid and citric acid respectively; there is an carboxyl group on the lactic acid and three carboxyl groups on the citric acid. The monodentate of lactic acid helps the growth of zinc oxide, compared to the tridentate of citric acid which can only produce zinc oxide film under very low concentration, but the growth of (002) face is not that stable as adding the lactic acid and zinc will electrodeposit to substrate.

实验中，当硝酸锌浓度低於0.1 M 时，氧化锌以(002)面为优选位相，当浓度提高，其他晶面将会出现，当硝酸锌为0.06 M，(002)晶面成长最佳，分别加入乳酸和柠檬酸，乳酸结构上有一羧基团而柠檬酸有三个羧基团，单芽基的乳酸有助於氧化锌成长，对照於三芽基的柠檬酸，则必须在极低的浓度下才能制备氧化锌薄膜，但(002)面成长却没有添加乳酸来的稳定而金属锌也会电沉积到基板上。

On the basis of the summarization of MCM-Cs main features and its assembly and packaging technologies, the paper puts stress on relatively deepgoing studies in practically advanced MCM-C assembly process technologies as gold ball wire bonding, IC chip gold ball stud bump making, IC flip chip bonding and underfilling, in high reliability MCM-C packaging process technologies as integral LTCC substrate packaging, hermetically metal sealing, and also in the basic technological process of MCM-C assembly and packaging. Later on, it presents the effectively engineering development of two high level actual module products--a high-density monolithic processor system MCM-C , a high-speed data collecting and processing system MCM-C. Lastly, it briefly introduces various common methods of quality inspection and reliability test of MCM-C assembly and packaging in engineering practice.

论文在综述MCM-C的主要特点及其组装封装技术的基础上，重点对金丝球引线键合、IC芯片金球凸点制作、IC芯片倒装焊与下填充等实用先进MCM-C组装工艺技术和LTCC基板与外壳及PGA引线的一体化封装、气密性金属封装等高可靠MCM-C封装工艺技术以及MCM-C组装封装基本工艺流程展开了较深入的研究，有效完成了高密度单片机系统MCM-C和高速数据采集控制系统MCM-C等两种高水平实际产品的工程化研制工作，扼要介绍了工程实践中MCM-C组装封装工艺常用的质量检验方法和可靠性试验方法。

"The worst has been watching people die, knowing you could not do anything for them," said Li Rui, a doctor in Wudu, where beds were laid out in a former open-air market.

全省各地，救援队伍和志愿者争取以清除土堆混凝土板，金属和木材，拖延机构和血迹斑斑的幸存者，整整一代人只后，中国的最严重的地震。

The author also studies the flow rule of the multisegment forming. According to the characteristic of 3-D deformation in sheet forming process and Mindlin hypothesis, the author establishes the model for sheet 3-D deformation and designs the finite element analysis software used in MPF. It will provide an effective analysis means for MPF in the future.

根据板材成形中三维变形的特点，作者基于Mindlin板壳理论，建立了用于三维金属板材成形过程分析的有限元模型，并编制了用于板材多点成形分析的有限元专用软件，为以后进行多点成形过程分析提供了有效的手段。

The DNG structure unit is composed of square split ring resonator and strip wire. The modified NRW method is used to extract the equivalent permittivity, permeability, and refractive index from the scattering parameters of the two-port waveguide with DNG structure. At the designed operating frequency, the refractive index approximates zero, which makes the nondirective electromagnetic wave tend to approximate plane wave along the normal direction of the superstrate and congregate the radiation energy.

以方形的SRR环和金属条带构成双负媒质结构单元，使用修正的NRW方法，通过放置双负媒质结构的二端口波导的散射参数，提取了等效的介电常数、磁导率和折射率，在所设计的工作加热板频率，折射率接近于0，可以将原本发散的电磁波整理成趋近于覆层面法线方向的近似平面波，起到能量汇聚的功能。

Sparks danced off the metal plates and arced between titanium supports.

火花在金属仪表板上跳舞，钛支座间产生电弧。

Lugalbanda was a god and shepherd king of Uruk where he was worshipped for over a thousand years.

Lugalbanda 是神和被崇拜了一千年多 Uruk古埃及喜克索王朝国王。

I am coming just now,' and went on perfuming himself with Hunut, then he came and sat.

我来只是现在，'歼灭战perfuming自己与胡努特，那麼，他来到和SAT 。