量热

In order to study the effects of cold-rolling deformation on damping characteristics of TiNi alloys and the relationship between the damping characteristics and the microstructure, the damping characteristics of martensite for Ti_(50)Ni_(50) alloy have been investigated systematically by DSC, TEM, DMA and sound internal friction test.

为了探讨冷轧变形对TiNi合金阻尼特性的影响，及TiNi合金马氏体的阻尼特性与组织结构之间的关系，采用示差扫描量热分析、透射电镜分析、动态机械分析和音频阻尼测试方法，系统研究了冷轧变形后Ti50Ni50合金马氏体的阻尼特性。

The chemical structure, thermal properties and liquid crystalline character of liquid crystalline ionomers were analyzed with FT-IR, POM, DSC and WAXD, the result shows the ionomers have the same structures-nematic texture-with the previous polymers before ion monomer was added.

利用红外光谱分析对其结构进行了表征，采用偏光显微镜、示差扫描量热仪和广角X射线衍射等手段对其液晶性能进行了表征。结果表明：各离聚物与原没有加入离子单体的聚合物具有相同的织构，均为向列型液晶。

The injection moulding shrinkages of HDPE/LLDPE blend and its blend filled with CaCO3 were studied.

研究了高密度聚乙烯／线性低密度聚乙烯共混物及其碳酸钙（CaCO3）填充体系的注射成型收缩率，分别用示差扫描量热仪和AR2000高级流变仪分析测定了共混物的结晶度和熔体黏度，并探讨了不同配比下共混物结晶度和熔体黏度与成型收缩率的关系。

The injection moulding shrinkages of HDPE/LLDPE blend and its blend filled with CaCO3 were studied. The effects of the crystallization and melt viscosity of the blends with different mass ratio on the shrinkage were analyzed by means of DSC and advanced AR2000 rheometer.

研究了高密度聚乙烯／线性低密度聚乙烯共混物及其碳酸钙(CaCO3)填充体系的注射成型收缩率，分别用示差扫描量热仪和AR2000高级流变仪分析测定了共混物的结晶度和熔体黏度，并探讨了不同配比下共混物结晶度和熔体黏度与成型收缩率的关系。

The crystallization behavior of nylon6/montmorillonite nanocomposites has been studied by means of WADX, DSC, SALS.

用广角X-射线衍射、差示扫描量热仪、小角激光散射等手段研究了尼龙6／蒙脱土纳米复合材料的结晶行为。

The cure kinetics of naphthyl/dicyclopentadiene epoxy resin and bis-phenoxy (3-hydroxy) phosphine oxide was investigated by differential scanning calorimetry under nonisothermal and isothermal condition.

用差示扫描量热仪研究了含萘环和二环戊二烯环结构环氧树脂NDEP和BHPPO的等温和非等温固化动力学。

By transmission electron microscope, selected area electron diffraction, powder X-ray diffraction, differential scanning calorimeter as well as self-devised drainage, the effects of metals on grindability, material size, hydrogen storage capacity and hydriding-dehydriding properties are emphatically researched. Fe、Co、Ni were added in pretreatment process of anthracite and the effects of the added metals are researched, also, the action mechanism of metals is discussed on the basis of experimental results.

通过透射电镜、选区电子衍射，X射线衍射、差式扫描量热分析以及自行设计的排水装置等分析测试手段，着重研究了储氢材料中金属对其可磨性、粒度大小、储氢密度、吸放氢性能等的影响，在无烟煤的预处理过程中添加了Fe、Co、Ni三种金属，研究了所添加金属对材料储氢的影响，并在实验结果的基础上探讨了储氢材料中金属的作用机理。

In order to discuss the fire-proof capability for different thermal insulating systems, there were 2 sets of small-scale conical calorimeter tests in this paper.

为了探讨不同保温系统的防火性能，本文进行了2组小尺寸外墙外保温系统的锥型量热计试验。

In order to discuss the fire-proof capability for different thermal insulating systems,there were two sets of small-scale conical calorimeter tests in this paper.

为了探讨不同保温系统的防火性能，本文进行了2组小尺寸外墙外保温系统的锥型量热计试验。

Shots' experimental results show that the X-ray calorimeters are stable, the sensitivity of calorimeter is (84.1±3.4)μV/mJ and the related combined standard uncertainty in the X-ray energy measure is about 31%.

结果表明：X光量热计性能稳定，其灵敏度？？84.1±3.4μV/mJ，X光能量测量的相对合成标准不确定度约为31%，可用于X光定量测量。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。