量块
- 与 量块 相关的网络例句 [注:此内容来源于网络,仅供参考]
-
In this paper, based on MPEG 2 Test Model 5 (TM5) bit rate control algorithm, there are some improvements proposed:① an intelligent integral action is proposed for improving the control precision of bit rate;② after using DCT AC coefficients to define the measure of macroblock and picture coding difficulty, an improvement on target bits allocation is proposed for the decoded picture quality and conformance including scene change, which can adjust the target bits allocation adaptively by their measure.
针对MPEG-2测试模型5(TM5)比特速率控制算法进行了以下改进:①引入一种智能积分作用,有利于提高比特速率的控制精度;②采用DCT交流系数定义宏块和图象的编码难度测度,然后提出了改进的目标编码量分配策略,即根据编码难度测度自适应调整图象和宏块的目标编码量,有利于提高包括场景变化在内的图象解码质量及其一致性。
-
After a brief review about the problems of bit rate control for MPEG video coding, two optimizations are proposed based on MPEG-2 Test Model 5 (TM5) algorithm:①An intelligent integral action is introduced for improving the control precision of bit rate;②After using DCT AC coefficients to define the measure of macroblock and picture coding difficulty, an improvement on target bits allocation is proposed for the decoded picture quality and conformance including scene change, which can ajust the target bits allocation adaptively by their measure.
文中首先对MPEG视频编码比特速率的控制问题作了简要回顾,然后针对MPEG-2测试模型5(TM5)算法进行了以下优化:①引入一种智能积分作用,有利于提高比特速率的控制精度;②采用DCT交流系数定义宏块和图象的编码难度测度,然后提出了优化的目标编码量分配策略,即根据编码难度测度自适应调整图象和宏块的目标编码量,这样有利于提高包括场景变化在内的图象解码质量及其一致性。
-
The measuring unit includes one heat block, one cooling block, and one sleeve. The facing end of the heat block and cooling block has one loaded plane which forms one loaded cavity with the sleeve in which the heat block and cooling block can be relative move.
所述量测部包括一加热块、一冷却块及一套筒,所述加热块及冷却块相面对的一端分别具有一承载平面,所述承载平面与所述套筒构成一承载腔,且所述加热块与冷却块可于所述套筒内相对移动。
-
First scanning the known handwriting materials then number them ,In pretreatment, we convert the valid part of the image into a standard size, as images carries out duotone and go throw off chirp handling in order to achieve better effect.draw features from the known handwriting materials with the Co-occurence,especially,we divided a copy of handwriting into 25 little pieces with the size of 128*128 ,drawing features from every little piecese with four directions(0 degree, 45 degrees, 90 degrees as well as 135 degrees) and calculate the four major feature values( veins and the statistical quantity of veins contrast and the statistical quantity of veins consistency Shang the statistical quantity of statistical quantity as well as the veins correlation of gray scale ), preservation all the feature value that drawn from all known ma terials to the handwriting characteristic database,then input the unknown handwriting materials, also using the method of the Co-occurence to draw those features, recycling the minimum European Distance law match the unknown writing material feature value with the handwriting characteristic feature database, export the label of the known hand writing materials which is most similar to the unknown material with minimum European Distance, and then we can confirm who is the author of the unknown material.
首先将笔迹材料作为图象扫描输入,并对其进行编号。预处理部分可将笔迹图象的有效部分规范化到一个统一尺寸,接着对其进行二值化和去除噪声的处理,以便于更好的提取图像的特征。在此我们采用了灰度共生矩阵法提取手写笔迹材料的纹理特征,与以往有所不同的是,我们将一份手写材料分割成64块大小为80*80象素的子图象,每个小块都从四个方向(0度、45度、90度以及135度)来更全面的提取特征,并计算出四个最主要的特征值(纹理一致性的统计量、纹理反差的统计量、纹理熵的统计量以及纹理灰度相关性的统计量),将从所有已知材料提取的特征值保存到纹理特征库中,对于待检手写材料,同样采用灰度共生矩阵的方法提取其纹理特征,再利用最小欧氏距离分类法将从待检手写材料中提取的特征值与纹理特征库中的特征值进行比对,与欧氏距离比对值最小的相匹配,输出匹配成功的原材料的标号,进而识别出待检材料书写者的身份。
-
Compared with the graphite, the coefficients of friction of the RL-C/C are lower under the same load of about 0.08-0.12, and the increasing range of the volume losses are still lower than those of the graphite. Compared with the SL pyrocarbon material, the COF and the volume loss of the SL-C/C are about 0.02-0.05 and 0.2 mm^3, lower than those under the same load. The COFs of most RL-C/C and SL-C/C specimens remain stable or decrease slightly with time, while those of the graphite and pyrocarbon specimens increase. The thickness of the integrated friction film of the RL-C/C decreases with load, but the wear surface of the SL-C/C is rough. Tough the wear surface of the graphite is integrated, the serious abrasive wear make the debris move easily and accumulate on the edge of the wear trace to form a restacked morphology. On the wear surface of the pyrocarbon material, some loosed debris, circular worn holes and flake worn out pyrocarbon has been found.
结果表明:PAN炭纤维改善C/C复合材料的摩擦磨损行为;在实验载荷范围内,与高强度石墨材料相比,含RL炭C/C复合材料的摩擦因数降低0.08~0.12;体积磨损量增幅降低;与热解炭试样相比,具有SL炭C/C复合材料的摩擦因数降低0.02~0.05,体积磨损量低0.2立方公厘左右;随着时间的延长,大部分C/C复合材料的摩擦因数基本相对稳定或呈小幅下降,而石墨、热解炭块的摩擦因数均呈不同幅度的上升;具有RL炭的C/C复合材料摩擦表面膜厚度随载荷增加而降低,具有SL炭的C/C复合材料摩擦表面较粗糙;高强石墨能形成较完整致密的摩擦膜,但磨粒磨损严重,磨屑易在摩擦膜边缘形成层状堆积;热解炭块摩擦表面磨屑堆积松散,有较多的孔洞以及热解炭层整体剥落的形貌。
-
Compared with the graphite, the coefficients of friction of the RL-C/C are lower under the same load of about 0.080.12, and the increasing range of the volume losses are still lower than those of the graphite. Compared with the SL pyrocarbon material, the COF and the volume loss of the SL-C/C are about 0.020.05 and 0.2 mm3, lower than those under the same load. The COFs of most RL-C/C and SL-C/C specimens remain stable or decrease slightly with time, while those of the graphite and pyrocarbon specimens increase. The thickness of the integrated friction film of the RL-C/C decreases with load, but the wear surface of the SL-C/C is rough. Tough the wear surface of the graphite is integrated, the serious abrasive wear make the debris move easily and accumulate on the edge of the wear trace to form a restacked morphology. On the wear surface of the pyrocarbon material, some loosed debris, circular worn holes and flake worn out pyrocarbon has been found.
结果表明:PAN炭纤维改善C/C复合材料的摩擦磨损行为;在实验载荷范围内,与高强度石墨材料相比,含RL炭C/C复合材料的摩擦因数降低0.08~0.12;体积磨损量增幅降低;与热解炭试样相比,具有SL炭C/C复合材料的摩擦因数降低0.02~0.05,体积磨损量低0.2 mm3左右;随着时间的延长,大部分C/C复合材料的摩擦因数基本相对稳定或呈小幅下降,而石墨、热解炭块的摩擦因数均呈不同幅度的上升;具有RL炭的C/C复合材料摩擦表面膜厚度随载荷增加而降低,具有SL炭的C/C复合材料摩擦表面较粗糙;高强石墨能形成较完整致密的摩擦膜,但磨粒磨损严重,磨屑易在摩擦膜边缘形成层状堆积;热解炭块摩擦表面磨屑堆积松散,有较多的孔洞以及热解炭层整体剥落的形貌。
-
In this paper, using the orthogonal design method, 16 groups(96 pieces) of shear masonry specimens were designed. According to the results of the experiment, the effects of the mortar strength, kind of walling materials, the mixed quantity of PVB and MC for the shear resistance of masonry specimens have been analysed. By way of experimental statistical regression, the calculating formula of the shear strength of modified mortar masonry for every kind of walling material has been established.
本文采用正交设计的方法,共进行了16组96个试件的抗剪试验,研究了砂浆强度、块体类别、PVB掺量、MC掺量四种因素对砌体抗剪性能的影响;并针对每一种块材砌体进行抗剪强度分析,经统计回归得到了改性砂浆砌体抗剪强度的计算公式。
-
During the process of the fore mentioned analyses, some tentative works as follows were done.(1)On the basis of the fundamental of spatial analytic geometry, the basic method for displaceable block searching was put forward and the relevant program was written. With this program one can easily search out all the displaceable blocks and omitting of blocks, which is very common in searching blocks manually, can be avoided.(2)The coefficient of stability of blocks with failure mode II-2(that is, sliding on a single sliding surface, but confined by near intersecting line )was deduced.(3)The multi-cavern effect of Laxiwa underground caverns was studied on the assumption that all of the caverns were full face tunneled at the same time.(4)The stability classification scheme of rock mass surrounding large scale underground caverns was established. In addition to inherit the merits of the method of engineering geological
在完成上述工作的过程中,本论文主要在以下几个方面进行了一些探索:①基于空间解析几何原理,提出了块体搜索的基本思路并编制出相应的程序,基本实现了块体搜索的自动化,既大大缩短了块体搜索时间,又能防止因人工搜索引起的遗漏;②推导出Ⅱ-2型(单滑面滑动,但受侧限面约束)块体的稳定性系数计算公式;③以数值模拟方法论证了拉西瓦地下厂房洞室群全断面一次开挖时群洞效应的具体特点;④以岩体质量、开挖效应、群洞效应和次生灾害效应为评价指标,建立了&大型地下洞室群围岩稳定性分类&方案;该方案既继承了水电行业规范&围岩工程地质分类&法的优点,又综合考虑了大型地下洞室群的工程特点。
-
Artificial feeding for the pale yellow or gray stools, quality hard, because milk proteins are more obvious after the protein decomposition odor, 1-2 times a day, and sometimes have milk block, if mixed fed infants, combined with starchy foods at the same time, a low frequency of stool, but the amount of deep brown, hardness than the pure milk-fed better, smell is also increased, if the increase purée can be green, especially if stool odor clearly shows that poor protein digestion, if the stool has bubbles indicate poor digestion of carbohydrates, if the appearance of oily that digest fat well, if the stool has milk valve, most of undigested fat and calcium or magnesium into the soap block, the volume of small, meaningless.
人工喂养的为淡黄色大便或呈灰色,质较硬,因牛奶中蛋白质较多,有明显的蛋白质分解后的臭味,每天1-2次,有时有奶块,若混合喂养的婴儿,同时再加淀粉类食物,大便次数不多,但量多深褐色,硬度比单纯牛奶喂养的好一些,臭味也加大,若加菜泥可呈绿色,若大便臭味特别明显,说明蛋白质消化不好,若大便有泡沫说明碳水化合物消化不好,若外观有油状,表示脂肪消化不好,若大便中有奶瓣,大多是未消化的脂肪与钙或镁结合成的皂块,量不多,无意义。
-
The calculation of the combinative energy between rock salt block and perovskite block shows that with Ni content increasing, the higher the combinative energy, the lower the T.
钙钛矿块和岩盐块的块间结合能计算表明:随掺Ni量增加,块间结合能升高,T降低。
- 推荐网络例句
-
As she looked at Warrington's manly face, and dark, melancholy eyes, she had settled in her mind that he must have been the victim of an unhappy attachment.
每逢看到沃林顿那刚毅的脸,那乌黑、忧郁的眼睛,她便会相信,他一定作过不幸的爱情的受害者。
-
Maybe they'll disappear into a pothole.
也许他们将在壶穴里消失
-
But because of its youthful corporate culture—most people are hustled out of the door in their mid-40s—it had no one to send.
但是因为该公司年轻的企业文化——大多数员工在40来岁的时候都被请出公司——一时间没有好的人选。