退火

The InP nanocrystallite was prepared by reflowing and annealing of organic solvent. The 55nm average diameter of InP nanocrystallits was obtained by calculating X-ray diffraction spectrum.

用有机溶剂回流退火法制备出了磷化铟纳米晶，并通过XRD谱计算出平均粒径为55nm。

The Ⅰ-Ⅴ characteristics of the long-wavelength infrared HgCdTe photovoltaic devices fabricated by different process including standard process, reflowing process and post-implantation annealing process were measured and investigated by model fitting analysis.

对三种不同工艺的HgCdTe长波器件（标准工艺、回熔处理、离子注入后退火）的Ⅰ-Ⅴ性能分别进行测试，并通过理论计算与实验数据拟合提取上述器件参数，分析暗电流机制及导致暗电流变化的原因。

Compared to the performance of the post-implantation annealed device, it is presumed that the reason which led to the degradation of the performance of the reflowed device is the instability of the ZnS passivation layer.

与离子注入后退火器件的性能变化相比，推测导致器件回熔后性能下降的原因是ZnS钝化层受热不稳定。

Thermal analysis showed that all of the four polymers have high thermal stability with T_g higher than 200 °C. The absorption spectra of PDOPPF and PDAOPF-PPF showed fine peaks resulting from pyrenes at C9 of the fluorene moiety and PDOFP and PDAOPF-P showed red-shift compared to polyflurenes.

同聚(9，9-二辛基芴)的光谱的相比，聚合物PDOPPF和PDAOPF-PPF的吸收光谱显示出一些精细吸收峰，聚合物PDOFP和PDAOPF-P的吸收光谱有较大红移，因而前两者的固态光谱发射蓝光，而后两者的则为蓝绿光，四个聚合物的薄膜即使经过在氮气气氛中150℃退火24h后光谱也没有明显的变化。

Mainly uses in the laboratory, the Industrial and mining establishment, the universities, colleges and institutes, the Scientific research Unit making the ultimate analysis determination, the ash content determination, the few low melting point metal to fuse, other small heat treatments and experiment and so on metal parts quenching, annealing, tempering, the electric stove may also use in the high temperature heating experiment.

主要用于实验室、工矿企业、大专院校、科研单位作元素分析测定、灰份测定、少量低熔点金属熔解、其它小型金属零件淬火、退火、回火等热处理和实验之用，电炉还可用于高温加热实验。

The results show that mechanical properties and microstructure only relate to recrystallization below the transformation point.

结果表明，在相变点之下，合金力学性能、显微组织只与再结晶有关；经(700~750)℃×1hAC的真空退火，可获得均匀细小的等轴组织，强度、塑性达到最佳匹配。

ABSTRACT By means of pole figure analysis the effect of a new technology which increases -value remarkably on distribution of cold rolling and annealing textures in thickness of extra low-carbon and high strength bake-hardening sheet steel has been studied.

在超低碳高强度烘烤硬化钢板传统生产工艺的热轧卷取和冷轧工序之间增加一个织构预处理过程，可促使该板的｛111｝退火织构异常强烈地发展，且它的值达到与IF钢板相同水平［1］。

The thermal decrease of the magnetization has beenfitted by bound magnetic polarons model and Curie-Weiss law.

随着退火过程中随氧流量的增加，样品磁矩逐渐减小；而氢流量的增加导致磁矩增强。

Moreover, a belt planishing mill setting is one of the major sectors of the belt cold rolling sets, in which a steel roll annealed is received in the device from the last course, and after planished a steel belt with certain extensibility and surface roughness is gained. The steel belt, after having planished, has eliminated its yielding platform, and it can improve its quality outstandingly to meet with the increasing demands in the market.

而板带平整机组是板带冷轧机组中重要的一环，该区域设备承接经退火之后的钢卷，经平整后，得到有一定延伸率和表面粗糙度的钢带，平整后的钢带消除了屈服平台，可显著提高板带的质量，从而满足市场日益增长的要求。

In addition, the device mobility can be improved from 0.11 to 0.8 cm^2/V-s by combining PaMS modification and the post-annealing treatment. It is because that traps in pentacene/insulator interface are significantly moved and the adhesion between pentacene and insulator are improved.

另外，我们也发现当我们结合poly-a-methylstyrene表面修饰及元件后退火效应，可以使得元件的interface traps大幅下降，而且pentacene和基板表面的附著变的更好，进而使得元件迁移率由0.11 cm^2/V-s提升到0.8 cm^2/V-s。

With Death guitarist Schuldiner adopting vocal duties, the band made a major impact on the scene.

随着死亡的吉他手Schuldiner接受主唱的职务，乐队在现实中树立了重要的影响。

But he could still end up breakfasting on Swiss-government issue muesli because all six are accused of nicking around 45 million pounds they should have paid to FIFA.

不过他最后仍有可能沦为瑞士政府&议事餐桌&上的一道早餐，因为这所有六个人都被指控把本应支付给国际足联的大约4500万英镑骗了个精光。