进行中的

The arguments on the necessary for quantized evaluation toward quality of services of multicast in Overlay networks are given. The concept of twodegree homeomorphism reduction multicast tree is introduced, extend Bowman's method for evaluating QoS of unicast dataflow by using stochastic process algebra is promoted, a modeling scheme is proposed for quantized evaluating QoS of concrete multicast instances in Overlay networks with simulation tool PEPA workbench.

论述了对Overlay网络中组播的服务质量进行量化评价的必要性，引入了组播树二度同胚约简的概念，推广了Bowman评价单播数据流服务质量的随机进程代数方法，提出用随机进程代数对Overlay网络中组播的服务质量进行评价的建模方案，并用PEPA workbench模拟工具针对具体的组播实例的服务质量进行了定量分析。

So the systematically study of loess landslides are emergently needed. Based on detailed investigation and survey of characteristics of environmental geology, engineering geology, hydrometeorology in Tongchuan, the distribution characteristic and the outer, inner factor of loess landslides are studied; and it is concluded that the rainfall and artificial engineering activity are the leading causes of loess landslide among various factors. Through plenty of tests of soil samples, it is researched that the loess"s physical mechanics characteristics, the loess landslide"s formation mechanism and kinematics mechanism.

本文在详细调查和勘察铜川地区的环境地质、工程地质及气象水文特征的基础上，对黄土滑坡的分布特征和滑坡形成的内外因素进行了深入剖析，认为在各种影响因素中，大气降水和人类工程活动是铜川黄土滑坡的最主要的诱发因素；在采集大量的土样并进行试验的基础上，对黄土的物理力学特征和黄土滑坡形成机理、运动学机理进行了研究，推导出了滑坡运动机理中的孔压参数A_D、B_D分别与孔隙比和饱和度的统计关系。

The contribution to the interruptive coordinator is that if the knowledge discovery can not go on solely in the knowledge base, the process is interrupted and turns to the database; and that if the data mining in the database discovers some redundant attributes, the process is interrupted and turns to the knowledge base to delete the redundant attributes.

对中断型协调器的发展是：原本单纯在知识库中的知识发现，若不能继续进行则要中断发现过程而借助于数据库进行规则的发掘；原本在数据库中的数据挖掘当发现属性的冗余时可以中断挖掘过程而在知识库中删除冗余的属性。

Methods Six cadaveric lumbar vertebrae were harvested and evaluated with dual-energy x-ray absorptiometry and quantitative computed tomography to assess bone mineral density. Matched, polyaxial pedicle screws were then randomly assigned by side and placed using the Magerl, Krag or caudad trajectory technique assisted by Iso-C 3D scan and 3D navigation system. Cyclic loading tests were performed with a maximum 250 N load at 3 Hz up to 30000 cycles while recording load and displacement. Stiffness quotients were calculated it comparison.

从尸体中获取6节腰椎椎体经DEXA和QCT检测骨密度值，证实为骨质疏松后在计算机导航下按随机分组的方法向12个椎弓根中置人不同方向的椎弓根螺钉，使用MTS-858生物力学仪脊柱力学测试平台进行±250N的循环负荷疲劳测试，记录负荷循环中的螺钉位移，计算系统的刚度系数并进行对比分析。

The invention discloses a method for measuring seawater chemical oxygen demand by photometry, wherein the seawater exemplar is first pre-processed, then using the basic potassium hypermanganate as reaction system, the potassium permanganate is deacidized quantitatively by organics to produce manganate, using pure water or margin solution as reference ratio, measuring the absorbance an of the manganate at its maximum absorbing wave length 430 nm, drafting the A-COD value operating curve, obtaining the concentration of the organics in the water, i.e.

本发明公开了一种对海水化学需氧量进行测定的光度测定法，该方法首先将海水样品进行预处理，再以碱性高锰酸钾为反应体系，这样海水中的有机物在强碱性介质中与过量的高锰酸钾迅速反应，高锰酸钾被有机物定量还原后生成锰酸盐，以纯水或空白溶液作参比，在锰酸盐的最大吸收波长430nm处测其吸光度A，该吸光度A与海水样品中的有机物的含量具有正相关关系。

In order to overcome the key problems in the experimental study on microwave plasma thruster, of which the whole system operates under vacuum condition, and to remove the unnecessary energy loss, the microwave source of plasma thruster operated under atmosphere and vacuum condition was developed by applying the design technology of the nonlinear power supply, the integration of attenuator and detector, liquid cooling, after overcoming the gas breakdown problems of electro and microwave apparatus.

为解决微波等离子推力器全系统在真空中进行实验，减少不必要的能量损失，利用开关电源、衰减器和检波器一体化设计技术和液体冷却技术，通过解决微波电子器件在真空中的放电问题，研制出可在大气与真空环境中工作的体积小和质量轻的微波等离子推力器微波源，其输出和反射微波功率可根据磁控管的阳极电流和检波器的输出电压进行测量。

The simulation model of EM rail launch based on PSpice is set up, in which not only the current and voltage during the launch can be simulated, but the experiment results such as muzzle velocity can be predicted and analysed. It can still work when the experiment conditions are changed.

该模型能够对发射过程中的电流、电压进行仿真；可根据试验条件和要求，通过调整参数对试验结果进行预测和分析；可对电枢的速度和加速过程进行仿真。

Polymarase Chain Reaction may be the better method of detecting M.tuberculosis than other methods and lead us to carry out a series of research on this problem. This thesis is composed of five parts:(1)systematic evaluation for the first time of the ability of five defferent PCR methods to detect M. tuberculosis;(2) using the endonuclease and southern blot by a radioactive and a nonradioactive labeled probe, to confirm the specificity of the PCR products and to analyse the sensitivity of detection by southern blot method using digoxigenin-labeled probe;(3) evaluation of acid-fast staining, bacterial culture and PCR for the detection of M. tuberculosis in sputum, pleural and peritoneal effusion samples;(4) The feasibility of PCR for detection of M tuberculosis on formalin-fixed paraffin embedded tissues;(5) 26 cases of sarcoidosis were retrospectively studiedwith PCR for M. tuberculosis and nontuberculosis Mycobacterium and the problems on histopatholoical diagnosis of sarcoidosis are discussed.

论文共分为五个部分，(1)首次系统地比较了五种不同引物序列的PCR检测结核杆菌方法的特异性和敏感性等情况；(2)利用限制性内切酶酶切分析和同位素及非同位素标记DNA探针进行Southern杂交的办法，分析PCR产物的序列与原设计是否相符及杂交检测PCR产物对提高检测结核杆菌敏感性的情况；(3)并对PCR用于快速检测临床标本中的结核杆菌进行了初步评价；(4)探讨了PCR用于检测石蜡包埋组织中结核杆菌的作用；(5)并利用PCR检测结核杆菌和非结核分枝杆菌的方法对26例原病理诊断为结节病的病例进行了PCR检测及组织病理学诊断的探讨。

The formula was established about calculating design parameters and technological parameters of ideal strip and bent strip in the period of forming. The thesis presented how to calculate the deformed area length and contact are radius of contact deforming between two elastic bodies on condition of the friction. The calculating formula of pinch force about plate-strip pinch mill was given and the results were analyzed that friction coefficient and radius of pinch rolls are very important for determining pinch force. Moreover, the rule of deforming and stress distribution of different 〓 ratio were gained on condition that the deforming was considered to be non-uniform distribution in the gap. The differential equations were got that calculate the displacements of large deflection of elastic cantilever rectangle plate with fixed end and the formula of the Finite Strip Method was conducted to study the regularity of mid-plane displacements, deformation and stresses for elastic-plastic large deflection bend of cantilever parallelogram plate with fixed or slidable end by integrating Prandtl-Reuss equation.

建立了一套完整的设计参数计算公式和在成型过程中理想带钢或具有月牙弯带钢的工艺参数的调整公式；在考虑摩擦力的条件下，对两弹性体接触变形过程中的接触变形区长度和接触弧半径用位移解法进行了研究，推导了板带递送机的递送力计算公式，从而得知在递送机设计过程中，应选择适当摩擦系数和辊身直径；另外，还从辊缝内带钢实际变形出发，分析了对于不同的〓值，带钢的变形规律及应力分布状况；建立了固定端悬臂矩形板弹性大挠度弯曲变形的控制方程，并且在对Prandtl-Reuss方程的积分处理的基础上，导出了固定端和滑动端悬臂平行四边形薄板的弹塑性大挠度的中面伸展位移、变形和应力的有限条元法公式，编写了Fortran语言计算程序，在各种参数条件下，对螺旋焊管成型过程变形规律进行了全面的分析研究，从而为螺旋焊管的生产和进一步的改进提供了理论依据。

This invention discloses a user data process method, which contains 1, judging each data package in IP data steam sent form high layer of empty command protocol stack, if the received IP data package is TCP ACK data package, then executing step 2, if the received data package is not TCP ACK, then executing step 3, 2, making PDCP layer function process to IP data package and ending current process, 3, making flow control to IP data package and then executing 2,, said invention can precedential send TCP ACK data package to opposite part in preserving original TCP/IP and universal mobile telecommunication system data transmission system base, to reduce data package reversion time delay and keep stable data transmission rate.

本发明公开了一种用户面数据处理方法，其主要处理步骤如下：a。对从空口协议栈中高层下发的IP数据流中的每一个数据包进行判断：当前接收到的IP数据包是否为TCP的ACK数据包，对所有是TCP的ACK数据包的IP数据包执行步骤b；对所有不是TCP的ACK数据包的IP数据包执行步骤c；b。对IP数据包进行PDCP层的功能处理，结束当前处理流程；c。对IP数据包进行流控，再转入步骤b。采用本发明方法能够在保持原有TCP/IP和全球移动通信系统数据传输机制的基础上，优先将TCP的ACK数据包发送到对方，从而减少TCP的ACK数据包的回复时延，保证稳定的用户面数据传输速率。

Do you know, i need you to come back

你知道吗，我需要你回来

Yang yinshu、Wang xiangsheng、Li decang,The first discovery of haemaphysalis conicinna.

1〕 杨银书，王祥生，李德昌。安徽省首次发现嗜群血蜱。