进行中

By means of thermodynamics calculation and analysis for samples,the carburization was further researched.

钢中的碳对超低碳钢的性能有很大的影响，针对鞍钢 ASP 中薄板坯连铸生产超低碳钢异钢种连浇过程中铸坯增碳的问题，通过理论计算和取样分析，对异钢种连浇过程铸坯增碳进行了研究，并对工艺进行改进。

The lead-time of order and the time of transportation in each stage and of whole chain are the main performance index at present research stage.

文章介绍了供应链中的"牛鞭效应"以及Witness的基本应用，讨论了在供应链系统中利用Witness软件进行仿真的方法，采用了由钢铁公司、钢材服务中心、部件生产商和汽车厂所组成的供应链结构进行仿真，整个供应链和供应链上各节点的订货提前期和运输时间是所介绍的模型中的主要供应链绩效指标。

The paper introduces the"bullwhip effect"of a supply chain and the application of software Witness, and discusses the simulation of software Witness in the supply chain system. The structure of supply chain in the paper is composed by steel company, steel service center, parts manufactures and car factories. The lead-time of order and the time of transportation in each stage and of whole chain are the main performance index at present research stage.

文章介绍了供应链中的"牛鞭效应"以及Witness的基本应用，讨论了在供应链系统中利用Witness软件进行仿真的方法，采用了由钢铁公司、钢材服务中心、部件生产商和汽车厂所组成的供应链结构进行仿真，整个供应链和供应链上各节点的订货提前期和运输时间是所介绍的模型中的主要供应链绩效指标。

The preparing process is described as follows:(1) the raw materials are dispersed in the solvent;(2) the solution is arranged between two electrodes;(3) alternating current with a voltage of 5 V-100V and a frequency of 10Hz-1000Hz is applied to both ends of the electrodes for 5minutes to one hour;(4) the product obtained after being washed with deionized water and pump filtrated or after centrifugal treatment is dried by being heated to 40 centigrade to 100 centigrade to get the nanometer grain, wherein the raw materials in the first step are micrometer materials or nanometer materials such as sulphide, selenide, telluride and oxide; without special requirement on shape or appearance, the materials can be in the shape of a rod, a fork, a star, a block or a sphere; the solvent in the first step can be water, ethanol, acetone, benzene or tetra chloromethane.

步骤为：1将原料分散于溶剂中；2使制成的溶液处于两电极之间；3在电极两端的加交流电，电压为5V-100V，频率为10Hz-1000Hz，时间为5min-1h；将产物用去离子水洗涤、抽滤，或进行离心处理后；4将所得到产物加热到40～100℃进行干燥，得到纳米颗粒。步骤1中原料为硫化物、硒化物、碲化物、氧化物等微米或纳米材料，其形貌不限，可以为棒状、枝状、星状、块状、球形等多种形状。步骤1中的溶剂可以为水、乙醇、丙酮、苯或四氯化碳。

Third,we set up the evaluation model about the choice of landing area project.

为了对备选的登陆地域方案进行评估，从分析影响登陆地域选择中的主要因素着手，将其归结为多目标决策中的方案排序问题，用灰色关联分析法建立了登陆地域方案选择的评估模型，从定性、定量的角度对登陆地域选择中的影响因素进行了判断，弥补了指挥员主观判断上的某些缺陷，具有一定的现实意义。

The drying process of chrome liquor was studied. The structure and property of chrome complex reducing by alcohol were analysed and tokened by many present well-rounded separation and analysis methods such as IR, UV-Vis Spectrum, IEC and pH potentiometry. Application tests of chrome tanning agents were conducted and tanning methods of tanning at high pH were studied. A systematic study was conducted on high alkalinity chrome tanning agents application in leather making process and possibility of clean chrome tanning was discussed.

本文系统地研究了多种小分子醇与重铬酸盐之间的氧化-还原反应，对反应过程进行了认真的剖析；对铬鞣液的干燥过程进行了研究；用红外光谱法、紫外及可见分光光度法、离子色谱法以及pH电位滴定法等多种比较成熟的现代分离分析方法相结合，对醇还原铬配合物的结构与性能进行了分析与表征；对铬鞣剂的鞣革性能进行了应用实验，研究了醇铬鞣剂在高pH值下的鞣制方法，并就高碱度铬鞣剂在制革过程中的应用进行了系统研究，探讨了用其实施清洁化铬鞣的可能性。

The drying process of chrome liquor was studied. The structure andproperty of chrome complex reducing by alcohol were analysed and tokened by manypresent well-rounded separation and analysis methods such as IR, UV-Vis Spectrum,IEC and pH potentiometry. Application tests of chrome tanning agents wereconducted and tanning methods of tanning at high pH were studied. A systematic studywas conducted on high alkalinity chrome tanning agents application in leather makingprocess and possibility of clean chrome tanning was discussed.

本文系统地研究了多种小分子醇与重铬酸盐之间的氧化-还原反应，对反应过程进行了认真的剖析；对铬鞣液的干燥过程进行了研究；用红外光谱法、紫外及可见分光光度法、离子色谱法以及pH电位滴定法等多种比较成熟的现代分离分析方法相结合，对醇还原铬配合物的结构与性能进行了分析与表征；对铬鞣剂的鞣革性能进行了应用实验，研究了醇铬鞣剂在高pH值下的鞣制方法，并就高碱度铬鞣剂在制革过程中的应用进行了系统研究，探讨了用其实施清洁化铬鞣的可能性。

In this paper, we introduce the algorithm of Schoof-Elkies-Atkin to compute the order of elliptic curves over finite fields. We give out a fast algorithm to compute the division polynomial f〓 and a primitive point of order 2〓. This paper also gives an improved algorithm in computing elliptic curve scalar multiplication. Using the method of complex multiplication, we find good elliptic curves for use in cryptosystems, and implemented ElGamal public-key scheme based on elliptic curves. As a co-product, we also realized the algorithm to determine primes using Goldwasser-Kilian's theorem. Lastly, the elliptic curve method of integer factorization is discussed. By making some improvement and through properly selected parameters, we successfully factored an integer of 55 digits, which is the product of two 28-digit primes.

本文介绍了计算有限域上椭圆曲线群的阶的Schoof-Elkies-Atkin算法，在具体处理算法过程中，我们给出了计算除多项式f〓的快速算法和寻找2〓阶本原点的快速算法；标量乘法是有关椭圆曲线算法中的最基本运算，本文对[Koe96]中的椭圆曲线标量乘法作了改进，提高了其运算速度；椭圆曲线的参数的选择直接影向到椭圆曲线密码体的安全性，文中利用复乘方法构造了具有良好密码特性的椭圆曲线，并实现了椭圆曲线上ElGamal公钥体制；文中还给出了利用Goldwasser-Kilian定理和椭圆曲线的复乘方法进行素数的确定判别算法；最后讨论了利用椭圆曲线分解整数的方法并进行了某些改进，在PC机上分解了两个28位素数之积的55位整数。

Linear solvation energy relation was firstly introduced in the paper, and the method and step of gaining the special parameters of solvent and solute were introduced in detail, and these special parameters were used to selection and optimization of extractive agent in extractive distillation. The model of predicting activity coefficient at infinite dilution was established by linear solvation energy relation. By the above theory, several candidate solvents were selected to separate C5 fraction, and by experiment of vapor-liquid phase equilibrium at atmosphere pressure, the mixture of N-methyl-pyrrolidone including 4% water was used extractive agent of separating C5 fraction. Then binary vapor-liquid phase equilibrium of the some compound in C5 fraction and N-methyl-pyrolidone were determined at atmosphere pressure and correlated by NRTL equation. Isoprene being objective compound, experiments were operated in the laboratory-scale column; the processes were simulated by RadFrac model in ASPEN PLUS. And by the combination of experiment and simulation, the new process of separation of C5 was established.

本文首先对线性溶剂化能关系进行了分析介绍，也介绍了采用溶剂化能关系得到溶质溶剂特性参数的方法步骤，并将这些参数用于萃取精馏萃取剂的选择与优化；也通过线性溶剂化能关系式建立无限稀释活度系数预测模型，取得了一定的预测精度；将通过上述方法初选的溶剂进行了常压汽液平衡的测定研究，通过实验研究选定含水4%的N-甲基吡咯烷酮溶液做为C5分离的萃取剂，测定了大量N-甲基吡咯烷酮与C5组分的二元平衡数据，并进行关联计算；以异戊二烯为目标产物在实验室规模的精馏塔内进行了C5分离的实验研究，取得大量塔内数据；通过选用合适的热力学模型，采用ASPEN中RadFrac模块对分离过程进行模拟研究，通过实验与模拟相结合，建立了C5分离的新工艺，为将来的工业化打下了坚实的基础。

A method for carrying out transparent transmission service of elastic packet ring includes setting station table and interface table in RPR station of EPR, finalizing top ring retransmitting process based on MPLS countermark by matching MPLS countermark in service frame to station table to obtain MAC address of correlated EPR station according to topological retransmission table of station, finalizing bottom ring process based on MPLS countermark by matching MPLS countermark in service frame to interface table to obtain correlated local Ethernet interface number.

本发明公开了一种弹性分组环透传业务的方法及装置，方法包括：在每一个弹性分组环RPR站点中，建立一张具有MPLS标签与弹性分组环站点关联关系的站点表以及一张具有MPLS标签与本地以太网接口关联关系的接口表；通过将业务帧中的MPLS标签与所述站点表进行匹配获得关联的弹性分组环站点的MAC地址，并根据站点的拓扑转发表，完成基于MPLS标签的上环转发处理；通过将业务帧中的MPLS标签与所述接口表进行匹配获得关联的本地以太网接口号，完成基于MPLS标签的下环处理。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。