较后的

when bilateral ureters were completely obstructed and severe azotemia occurred, the prognosis may be better and the renal function can be recovered if the obstruction is removed within 48 hours. if the obstruction will be removed in more than 72 hours, the renal function can not be recovered and the prognosis is worse.

当输尿管完全梗阻并出现重度氮质血症后在实施梗阻后的第二个24h内解除梗阻，可有效恢复肾功能，预后较好；若≥72h解除梗阻，则肾功能无法恢复，预后较差。

Exterior refinements include:+ A larger, polished stainless steel wire mesh front grille that enables the required additional airflow for engine heat dissipation + A new, lower front fascia that incorporates a larger lower grille for increased cooling capability; brake ducts for front caliper and rotor cooling and splitter to counteract lift created by larger grille openings + A new lower rear fascia that facilitates smooth airflow under the vehicle for improved cooling + Lower rockers that visually bridge the lowered front and rear fascias + A specific, fluidly sculpted hood designed to provide space for the engine's supercharger + Ten-spoke, flangeless, painted aluminum alloy wheels that assist in brake cooling + A higher, more rearward-positioned rear spoiler that enables balanced aerodynamic downforce with the front splitter + V-series badging on the vehicle's rear decklid and front doors, and "Supercharged" block lettering on the doors

外观的改进包括：+有较大，抛光不锈钢丝网的前格栅，使发动机所需的额外的散热气流+一个新的，较低的前仪表，它把一个较大的下格栅关于提高冷却能力；刹车管为卡钳和转子冷却和分配器足以抵消格栅的开口更大的提升+创建一个新的较低的后部汽车仪表板，便于在改善冷却车辆气流平稳+下摇滚乐的视觉弥补降低的前后面板+一个具体的，流畅，造型盖设计为发动机的增压器+十空间发言，凸缘，画铝合金轮毂的协助刹车冷却+阿更高，更向后定位的后扰流板，使平衡与前分路空气下压力+ V系列徽章的车的后部行李箱的大门，和&增压&块门上刻字

And home of net amuse oneself gives priority to body with the 80 youths after, relatively at the age larger crowd, 80 hind group more approbating a net to swim is a kind of new way of life, at the same time more deflection generation acts kind of game into the part that feels stronger.

而网游玩家以80后的年轻人为主体，相较于年龄较大的人群而言，80后群体更认可网游是一种新的生活方式，同时更加偏向代入感较强的角色扮演类游戏。

Three weeks afer the allografting,there was no significant difference between the two al lografting groups in maximum load(P＞0.05),Eight weeks later,the maximum load of the group that was preserved by liquid nitrogen after program freezing(76.60±4.67)N was better than the group that was preserved by －80℃ deepfrozen(75.99±4.20) and similar with the autografting group(76.72±2.55).4.The healing process and histological behavior of the two deepfrozen groups are similar with the autografting group,and the program freezing group is better.

结果 a经程序冷冻液氮保存方法处理后，髌腱的最大载荷无明显下降，细胞活性得到了较好的保存，组织学观察冷冻损伤较－80℃深低温保存方法轻微；b程序冷冻液氮保存处理的移植物在术后未表现明显的排斥反应，且免疫反应随时间的推移而下降；c移植后3周，各组移植物的最大载荷无显著差异(P＞0.05)，移植后8周，程序冷冻液氮保存组移植物的最大载荷(55.87±1.86)N优于－80℃深低温保存组(52.14±2.79)，而和自体移植组相近(57.70±2.76)N；d从组织学观察看，－80℃深低温保存组和程序冷冻液氮保存组移植后的愈合过程均和自体移植组相似，而程序冷冻液氮保存组的愈合过程和组织学行为更接近于自体移植组。

Results 1.After treated by:program freezing,the maximum load of the allografts has no evident decrease and the cell activity of allografts was preserved well,the frozen hurt after program freezing was more slight than －80℃ deepfrozen,2.No evident reject reaction can be seen during the healing process after deep frozen and the reject reaction declined as the time pass by.3.Three weeks afer the allografting,there was no significant difference between the two al lografting groups in maximum load(P＞0.05),Eight weeks later,the maximum load of the group that was preserved by liquid nitrogen after program freezing(76.60±4.67)N was better than the group that was preserved by －80℃ deepfrozen(75.99±4.20) and similar with the autografting group(76.72±2.55).4.The healing process and histological behavior of the two deepfrozen groups are similar with the autografting group,and the program freezing group is better.

结果 a经程序冷冻液氮保存方法处理后，髌腱的最大载荷无明显下降，细胞活性得到了较好的保存，组织学观察冷冻损伤较－80℃深低温保存方法轻微；b程序冷冻液氮保存处理的移植物在术后未表现明显的排斥反应，且免疫反应随时间的推移而下降；c移植后3周，各组移植物的最大载荷无显著差异(P＞0.05)，移植后8周，程序冷冻液氮保存组移植物的最大载荷(55.87±1.86)N优于－80℃深低温保存组(52.14±2.79)，而和自体移植组相近(57.70±2.76)N；d从组织学观察看，－80℃深低温保存组和程序冷冻液氮保存组移植后的愈合过程均和自体移植组相似，而程序冷冻液氮保存组的愈合过程和组织学行为更接近于自体移植组。

Both surfactants can intercalate into the layers of the pristine clay dispersed in water prior to polymerization. Although the d spacing of the POSS-intercalated clay is relatively smaller than that of the CPC-intercalated clay, PS more easily intercalates and exfoliates the POSS-treated clay than the CPC-treated clay.

插层剂预先插层到分散於水中的黏土后再进行乳化聚合反应，虽然POSS插层后黏土的层间距离较CPC插层后的层间距离小，但聚苯乙烯与POSS互容性较佳，所以易使黏土达到脱层结构，而CPC则反之。

In this research, B2 gene of HCV was highly expressed as a fusion protein (Trx-B2) by cloning into pThioHisA, and induced specific anti-HCV antibody in higher titer than unmodified B2 protein after immunize mice or rabbit.The results showed antigen Trx-B2 has obvious immunogenicity and induced specific antibody,which might be able to serve as diagnosis HCV. Consequently, this PcAb of rabbit was used to coated Immulon plate, and a method of both antibodys sandwiching antigens was developed to detect 32 HCV positive serum and 32 nomal serum.Results show that ratio of positive are 87.5%and 43.75% respectively.

但缺点是该抗原所诱导的抗体滴度较低，可能是由于其分子量较小，所以本课题将人工合成的HCV复合多表位抗原基因B_2克隆到表达载体pThioHisA中，利用硫氧还蛋白融合方式对该抗原进行修饰，并在大肠杆菌中表达融合蛋白(Trx-B_2)，纯化该蛋白后免疫小鼠及家兔，结果表明用硫氧还蛋白修饰后的融合蛋白免疫小鼠和家兔后，得到的抗体滴度均高于未经修饰过的复合多表位抗原合成肽所诱导的抗体滴度，并从免疫后的兔血清中提取IgG包被酶联板，利用双抗夹心法分别检测了32份HCV阳性血清和32份正常人的血清，结果阳性率分别为87.5%和43.75%，符合率为71.88%。

The simulation results of the cylinder-block model were given in the article, consistent with that of Middlemen"s. It was shown that the block part could improve the uniformity of the flow distribution. The analysis of the flow field of some materials with different power-law factor in the die designed by Mckelvey was close to that of Mckelvey"s. It was shown that the flow distribution was uniform in the die that can producesheets with 1200mm in width. During the analysis the flow channel was divided into several parts to get the details about the fluid flow in each area. A conclusion was drawn after analyzing the influence of the die pressure on the flow distribution, that the higher pressure is good for the output and bad for the uniformity of the distribution. Simulation of the die applying the cylindrical main runner showed the fact that when the cylinder replaced the cone the change of uniformity was trivial. The uniformity of the non-block flow channel was so poor that the block in the proper position of the die channel was necessary. The project of the die for the wider sheet was put forth, and the analysis of the fluid flow in the die was shown.

本文模拟了圆柱管缝隙流模型的三维流动场，得到了与Middlemen结论一致的流动均匀性，并通过模拟直观地展示了采用阻尼块可以改善挤出均匀性的现象；分析了多种幂率指数的流体在Mckelvey等人设计的流道模型中的流动分布，得到了与Mckelvey的分析结果接近的压力降和流量偏差；本文建立了1200mm幅宽机头流道的三维有限元模型，并逐个分析各个区域和多个截面的流动分布状况，由此揭示了1200mm幅宽L-型机头流道内的流北京化工大学硕士学位论文动分布基本均匀，并在分析了机头压力对于挤出流动分布的影响后得出结论：较高的机头压力可以获得较大的产量，但是不利于物料均匀分布；模拟了采用圆柱管主流道时机头流道内的流动分布，得出结论：主流道由圆锥管改为圆柱管时对流动均匀性影响不大，通过设置适当的阻尼仍然可以达到挤出平衡；模拟了两端进料式圆柱管无阻尼流道的流动均匀性后得到结论：两端进料式无阻尼结构的流动均匀性较差，宽机头中仍然有必要设置阻尼块；确定宽幅机头流道的基本方案，并设计了一种宽幅防水卷材挤出机头流道的结构，通过流动模拟表明该种结构的流动均匀性较好；考察了宽幅机头对于不同厚度片材的挤出适应性，得到结论：当生产不同厚度的片材时，阻尼块高度需要调整。

The template was used,after slighter scratches or damages may use the oil slushto add sufficiently smooth and use the special-purposepatching pint seal again.lf there was a bigger damage,the hole may nail wedge and then use the oil slush,patch paint patching.

模板使用后，较轻微的刮痕、破损可用油灰添充平整后再用专用的修补漆密封；较大的损伤、孔洞可钉入木楔后再用油灰、修补漆修补。

The research on the tissue culture and cell suspension culture showed that thesuitable culture medium for inducing bud was MS supplemented with 1.5mg/L 6-BAand 0.1mg/L NAA, and for the generation-continuing multiplication was MSsupplemented with 1.5mg/L 6-BA and 0.2mg/L NAA. The rooting medium was1/2MS supplemented with 0.5mg/L IBA and the rooting rate was 45.0%. Plantletsurvival after transfer to sand was 52.5%.The induction rate of calli was66.7%～86.6% and the optimum medium was MS medium with 0.5mg/L 6-BA and2.0mg/L 2,4-D. The calli became smallest partical size, friable and had gooddispersion ability after 3 times successive transfer culture, the optimum medium wasMS medium with 0.2mg/L 6-BA and 2.0mg/L 2,4-D. Culturing these particles on sixkinds of MS liquid media with different hormone contents, the optimum medium wasselected basing on he change of the density of single-cell, the density of cellaggrefate and the mass of cell.

对蒜头果进行的组织培养与细胞悬浮培养研究结果表明：MS+6-BA1.5mg／L+NAA0.1mg／L+蔗糖3％激素组合能够较好地诱导芽的初始分化和增殖，适宜的芽苗继代增殖培养基为MS+6-BA1.5mg／L+NAA0.2mg／L+蔗糖3％；采用1／2MS+IBA0.5mg／L+蔗糖3％为生根培养基，生根率为45.0％；移栽到河沙的生根苗成活率为52.5％；愈伤组织诱导率为66.7％～86.6％，其中以MS+6-BA0.5mg／L+2，4-D2.0mg／L+蔗糖3％的培养基最佳，其诱导出的愈伤组织具有较强的增殖能力和较好的脆散结构，最佳继代培养基为MS+6-BA0.2mg／L+2，4-D2.0mg／L+蔗糖3％，且培养基中的6-BA与2，4-D浓度的比值越小，愈伤组织生长越快，结构越脆散，增殖率越高；将继代后的愈伤组织转入6种含不同激素浓度组合的MS液体培养基中进行振荡培养，在综合分析各培养基的单细胞密度，细胞团块密度，细胞生物量增长率等指标后，初步筛选出MS+6-BA0.2mg／L+2，4-D2.0mg／L培养基为较好的液体培养基。

Plunder melds and run with this jewel!

掠夺melds和运行与此宝石！

My dream is to be a crazy growing tree and extend at the edge between the city and the forest.

此刻，也许正是在通往天国的路上，我体验着这白色的晕旋。