轴向的

Aiming at the specific mission that intercept the warhead of tactical ballistic missile, the new issue for designing the guidance law is analyzed, and a new guidance method that fit for the mid-course is presented, based on the idea of predicting the intercept point.

针对拦截战术弹道导弹这一特殊任务，分析了导引律设计面临的新问题，提出了以预测拦截命中点为思想的中制导段导引方法，研究了末制导段比例导引律弹道形状和过载分布特点，在此基础上为了改善比例导引律的缺陷，引入了目标机动加速度和导弹轴向加速度等信息，对比例导引律进行了修正，并对导引律中各参数进行了优化。

According to the investigation of the analytical results, it can be seen that the vertical seismic excitation may enhance the vertical displacement and the bending moment at mid-span of the beam, but have little effect on the variation of the axial force and ultimate carrying capacity of column.

通过分析研究，表明竖向地震作用会加大框架梁的垂直位移和跨中弯矩，但对框架柱轴力的加大作用及极限承载力的影响相对较小。

The stable lobe graph for high speed milling of 2A12 aluminum alloy thin-walled workpieces was obtained by utilizing modal parameters and force coefficients,which were acquired respectively by milling tests and modal analysis tests on Mikron high speed...

针对2A12铝合金薄壁结构零件，利用M ikron高速加工中心和相关仪器，通过铣削力实验和模态实验，分别测得特定刀具和工件系统的动态铣削力系数和模态参数，从而绘制出高速铣削薄壁零件的稳定性叶瓣图，得到了不同径向切深条件下的极限轴向切深，并通过试验进行了验证。

When N=6, the electron transfer was similar to the case of N = 4, but inner layer electronic local was weakened so that parts of electrons in S layer was excited into P electrons, increasing axial electron mobility, meanwhile more performances of sp2 hybrid orbital formation were completed.

在N=6的图中，电子转移情况类似N=4的情况，但内层电子局域性有所减弱，导致部分s电子被激发成p电子，增大轴向电子流动性，同时可表现更多的sp2杂化轨道的形成。

By experimental work and theoretical analysis, the author investigated the principle of knitting biaxial wefts knitted fabrics and knittability on flat knitting machine, This part analyzes the influence of yarn tension, taking down force, pulling down depth in detail.

通过实验研究和理论分析，文中探讨了纬编双轴向织物的编织原理和在横机上的可编织性，分析了弯纱深度、给纱张力、牵拉力对编织的影响。

We analyze the process of thermoplastic composites impregnation in hot pressing machine theoretically. By the experience we confirmed the fight parameter of the hot-press temperature, intensity of pressure, retentive time, the method of lower temperature etc. and discussed how these parameter influenced the biaxial wefts knitted thermoplastic composite.

对热塑性复合材料的热压浸渍过程进行了理论分析，通过实验确定了合理的升温速率、热压温度、压力、保温时间、冷却方式等工艺参数，并且探讨了热压参数对纬编双轴向复合材料性能的影响。

In operation, the downhole devices will be laid down with tubings which will move up and down using the operation machine. Since the injection head can rotate in the determined speed, the rotating flow, compared with the conventional stable axial flow, can prevent the sands from depositing in the horizontal annular and washing the screen. The jet from high-efficiency jet nozzle will wash the screen directly with concentrated hydro-power. The working fluid can be clean water, without damage to the formation.

作业时用油管下入该井下装置，利用作业机带动油管上下移动，由于喷头可按照既定速度旋转，返回流体在水平段由常规的平稳轴向流动变为旋转流动，既可实现对防砂管的全方位解堵，又能避免砂粒沉积；高效喷嘴产生的射流直接对着防砂管冲击，能量集中；工作介质为清水，不会对地层带来二次污染。

In operation, the downhole devices will be laid down with tubings which will move up and down using the operation machine. Since the injection head can rotate in the determined speed, the rotating flow, compared with the conventional stable axial flow, can prevent the sands from depositing in the horizontal annular and washing the screen. The jet form high-efficiency jet nozzle will wash the screen directly with concentrated hydro-power. The working fluid can be clean water, without damage to the formation.

作业时用油管下入该井下装置，利用作业机带动油管上下移动，由于喷头可按照既定速度旋转，返回流体在水平段由常规的平稳轴向流动变为旋转流动，既可实现对防砂管的全方位解堵，又能避免砂粒沉积；高效喷嘴产生的射流直接对着防砂管冲击，能量集中；工作介质为清水，不会对地层带来二次污染。

It is possible to use four amorphous toroids replace eleven ferrite ones without changing the pulse power system, and the axial length of cell constructed with amorphous toroids can be reduced to 57.5% and the cost of magnitic cores to 42.5% comparried to the constracted with ferrite toroids.

在神龙一号的脉冲功率系统不作改变的情况下使用4块国产非晶磁环替代原组元中的11块铁氧体是可能的。磁芯截面积由360cm~2减小到131cm~2，这样可使组元轴向长度缩短42.5％，磁芯投资减少57.5％。

For the case of deep oil well, pumping rod is eccentric in oil tube during the oil recovery.

在采油过程中，由于油井较深的缘故，抽油杆在油管中是处于偏心位置的，聚驱井产出液在抽油杆做轴向运动的井筒中的流动问题就是非Newton流体在内管。。。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。