负载

It is demonstrated that the chiral quaternary ammonium salts catalysts exhibit promising catalytic properties for the substrate. Part III: The synthesis and the characterizing of the macroporous aminomethyl resin-supported cinchona alkaloid complexes and the study on its catalytic properties The part consists of two subsections. the macroporous aminomethyl resin -supported cinchona alkaloid complexes were synthesized by the stuff (cinchonine, quinine and macroporous aminomethyl resin). Their structures were characterized by means of elemental analysis, XPS, TG/DTA; the chiral polymer-supported complexes were first used as catalysts for the reduction of ketones. Their catalytic properties for the reduction processes were investigated. The comparison of the products e.e., the conversion of the substrate among different reduction processes was employed with determined by HPLC. The effects of the time, the temperature, the ratio of catalyst to substrate, reaction solvent as well as the recycle times were also discussed.

第三章聚-4-氨甲基苯乙烯负载金鸡纳碱金属络合物的合成与表征及其不对称催化性能研究本章分为两节，以辛可宁和奎宁及聚-4-氨甲基苯乙烯为原料，合成了4种聚-4-氨甲基苯乙烯负载金鸡纳碱络合物催化剂，并对它们的结构用元素分析、X-射线光电子能谱、TG/DTA等几种测试手段进行了表征；首次将所合成的手性高分子负载的金属络合物用于催化芳香酮不对称还原反应，详细研究了所得的手性高分子负载的金属络合物对不同底物的催化性能，用HPLC等分析手段定量检测了还原过程的底物转化率及其产物对映异构体选择性，并考察了反应时间、反应温度、催化剂和底物投料比、反应溶剂和循环次数对催化性能的影响。

The theme of this thesis is to study applications of radio communication technologies to direct control of air conditioning load. Other than of Taiwan Power Company self constructed radio load management system, technical feasibility of controlling air conditioners by FM subcarriers of commercial broadcasting stations as well as radio paging system of telecommunication companies are to be studied.

摘要本研究探讨无线电通讯技术於空调负载直接控制之应用，除台电目前既有之无线电负载管理系统，本研究针对租用电信公司无线电传呼系统之无线电传呼式负载管理系统及租用广播公司副载波系统之副载波负载管理系统进行分析与可行性之探讨。

New contributions of this work are as follows:(1). Preparation of Spherical MgCl_2-Supported Late-Transition Metal Catalysts for Ethylene PolymerizationFacile and effective immobilization of late-transition metal catalysts. 2,3-bis-(2,6-diisopropylphenyl) butane diimine nickel dibromide (1) and 2,6-bis-[1-(2,4,6-trimethylphenylimino)ethyl]pyridine iron dichloride (2), for ethylene polymerization has been achieved, using spherical MgCl_2 supports obtained by thermal dealcoholization of MgCl_2·2.56C_2H_5OH, and the effects of dealcoholization temperature on supported late-transition metal catalysts and the properties of resultant polymers were studied, the results indicated that:1.Supports with appropriate mechanical strength, high surface area and high porosity could be prepared by thermal dealcoholization of spherical MgCl_2·2.56C_2H_5OH supports; 2.BET, XRD, IR, SEM, GPC and DSC analyses indicate that the activities of the supported late-transition metal catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature.

本工作的新贡献如下：(1)、球形氯化镁负载后过渡金属催化荆催化乙烯聚合本文将配合物2，3-双(2，6-二异丙基苯亚胺)丁烷二溴化镍(1)和配合物2，6-二[1-(2，4，6-三甲基苯亚胺)乙基]吡啶二氯化铁(2)分别直接负载于经不同热脱醇温度处理的球形氯化镁载体上，研究了氯化镁载体的脱醇温度对负载化后过渡金属催化剂及其聚合物的影响，研究表明：1、通过对球形MgCl_2·2.56C_2H_5OH载体进行热脱醇处理，可以获得合适机械强度、较高比表面积和较高孔隙度的球形氯化镁载体；2、BET，XRD，IR，SEM，GPC和DSC研究表明，脱醇温度极大地影响负载后过渡金属催化剂的活性和聚合物的性能。

To solve QoS-constrained routing problem and the problem of balancing network load, an algorithm based on tabu search is proposed, which has a better ability of balancing the cost of the multicast tree and the network load; upon this algorithm, a new algorithm based on degree-constrained and load-balance is proposed, which has a nicer integrative performance on equipoise the cost of multicast tree and the load of links and nodes.

2针对网络负载均衡的QoS问题，提出基于禁忌搜索的负载均衡QoS组播路由算法，算法能平衡组播树代价和网络链路负载均衡状况；在此基础上提出了基于度约束和负载均衡的QoS组播路由算法，算法在满足QoS约束的基础上，均衡了组播树代价、网络链路负载和节点负载三者之间的关系，综合性能良好。

Since the load of the node is proportional to the ID space that the node is responsible for, the ISLB algorithm distributes ID space based on the node capacity. Because the load of the node also increases with the number of fan-in edge of the node, the LSLB algorithm distributes the load by redirect the fan-in edge of the node. Both the ISLB algorithm and the LSLB algorithm are able to balance the load efficiently.

在结构化对等网络中，对等节点的负载与该节点所负责的ID空间的大小成正比，ISLB算法按节点的处理能力分配ID空间；在另一方面，由于节点的负载随该节点入度数的增加而增加，LSLB算法统计节点各入度的负载和节点的总负载，并通过入度的转移使对等网络负载平衡。

This paper presents a self-adaptive load balancing algorithm, in which each peer creates a local load distribution view using a passive load statistic method and a local file requested view using file requested statistic method. When load imbalance exists in the system, the heavy loaded peer will make the logical links which point to itself to point to a light loaded peer in its local load distribution view, with the indegree of the heavy loaded peer decreasing and the indegree of the light loaded peer increasing, the load imbalance magnitude will decrease. When the request load of the heavy loaded peer is high, the peer will use its local file request view to get the popular file and cache the file to corresponding target peer.

提出一种自适应负载均衡方法，方法采用一种被动式结点负载统计方法生成局部负载视图；采用一种文件访问统计方法生成局部文件访问视图；当系统内结点负载存在差异，重载结点把指向自身的逻辑链路迁移至指向局部负载视图中的轻载结点，通过减小重载结点入度和增加轻载结点入度来减小结点间负载差异；当结点的请求负载较高时，通过局部文件访问视图计算需要缓存的热点文件及目标结点，降低承载热点文件的结点的请求负载。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Load model is representation of the relationship between the power and bus voltage. Load characteristics of power system have a significant effect on power system analysis of power flow and stability that includes transient stability, voltage stability and dynamic stability. The accurate load characteristics will help engineer to analysis power flow and stability.

中文摘要负载模型可反映负载功率和电压之间的相互关系，电力系统的负载特性对系统负载潮流及稳定度包括暂态稳定度、电压稳定度及动态稳定度的分析皆有著重大的影响，准确的负载特性将有助於电力工程人员在负载潮流与稳定度之模拟分析。

Of electric current, voltage and resistor what can make up programmed control to make electric current, voltage and power is accurate read time use within transient state simulative generator of buy pulse form is successive as laden as pulse job has the synchronism outside complete protective function to spark input higher power can shunt-wound job can make, electronic load is all Agilent Dc that the solution of stand-alone of ideal equipment Agilent of power cell and batteries capacity test offers your place to need all sorts of dynamic and laden application undertook optimizing.

电流、电压及电阻的可编程节制电流、电压及功率的切确读回用于瞬态模拟的内置脉冲形发生器陆续与脉冲负载工作存在完整的保护性能外同步触发输入较高功率可并联工作可使到高达240V的负载可利用单输入或多输入主机箱 3年保修期 Agilent直流电子负载是测试与评估直流电源，功率元件和电池容量测试的理想行动措施 Agilent单机解决方案供给您所需的一切 Agilent dc电子负载为各类动静负载应用进行了优化。

However, as the name（read－only memory）implies, CD disks cannot be written onorchanged in any way.

然而，正如其名字所指出的那样，CD盘不能写，也不能用任何方式改变其内容。

Galvanizes steel pallet is mainly export which suits standard packing of European Union, the North America. galvanizes steel pallet is suitable to heavy rack. Pallet surface can design plate type, corrugated and the gap form, satisfies the different requirements.

镀锌钢托盘多用于出口，替代木托盘，免薰蒸，符合欧盟、北美各国对出口货物包装材料的法令要求；喷涂钢托盘适用于重载上货架之用，托盘表面根据需要制作成平板状、波纹状及间隔形式，满足不同的使用要求。