误差的补偿

As shown by the experimental results, the calibration method is very effecting, easy to judge the error of LINS caused by each coefficient in its error model and the effectiveness of error coefficient compensation.

实验研究结果表明，作者提出的校准方法效果明显，容易判断每一项误差系数在LINS中对导航信号精度的影响及补偿效果，整个校准过程的时间h，适合工程上使用。

The precision measurement of transmission error of machine tools is a prerequisite condition to implement error compensation.

精密加工是现代制造技术的主要发展方向之一，采用误差补偿技术实现高精度的机械制造技术是一条经济合理而又可行的途径。

An adaptive control algorithm is proposed for Stewart platform which is usually used to as a flight simulator. Firstly, the coupling force caused by the dynamics of the legs is compensated using the New ton Euler inverse dynamic formula, and the simple error dynamic is obtained.

针对应用于某型飞行模拟器的Stewart平台，首先利用Newton-Euler逆向力公式对平台动力学方程中形式复杂的连杆动态特性进行补偿，得到形式简单的误差动态系统。

In order to solve the problem mentioned above, a new dynamic compensation method using linear extrapolation scheme was presented to compensate the measured output of inductorsyn. Thus the measuring error induced by measuring delay was reduced, and the system tracking precision was enhanced.

为解决上述问题，提出一种动态补偿方法，采用线性外推方法，对圆感应同步器数显表的测量输出进行动态修正，以减小由于测量延迟产生的测量误差，从而提高系统的动态跟踪精度。

The error compensation is introduced in the interpolation algorithm to increase the interpolation point's solution precision in the cutting direction of the parametric curved surface. The reasonable simplification of the computed result of the interpolation point's parameter value is carried in the operation process by focusing on the character that curvature of slow-varying parametric curved surface changed slowly and the feature that the scanned profile of translational scanned curved surface is parallel along the scanned line.

通过引入误差补偿值以提高参数曲面在走刀方向上插补点的计算精度，针对缓变参数曲面曲率缓变和平移扫描曲面扫描轮廓沿扫描线平行的特点在运算过程中对插补点参数值的计算结果进行合理简化。

We introduced all parts of a general repetitive control system after depicting the regulations of the repetitive control theory. The parts include inner model, delay section, compensator, low pass filter and controlled object. And we also analyzed the robust, convergence, following error of the repetitive control system.

阐述了重复控制的基本思想，重点介绍了重复控制系统得各个组成部分，包括重复控制器的内模、周期延时环节、补偿器、低通滤波器和控制对象等，并且分析重复控制系统的稳定性、收敛性和稳态误差等性能特征。

Numeric simulation results are given to illustrate the feasibility and successfulness of the DGSMC.

最后，以模拟的方式说明以灰色估测器应用於离散型滑模控制器的可行性，同时比较GM(1，1)模型经过误差补偿与修正之后的效能。

In order to prevent grains from congregating so as to minish the size of the powder, the growing rate of the crystal grain was controlled during the hydrolysis of tetra-nbutyl titanate by using the competitive reactivity of the surface modifier sulfhydrate.

动态分子光谱分析法示踪了偶氮染料、取代酚在TiO〓半导体界面/溶液的光降解动力学行为，发现了中间体生成和衰减的峰形动力学特性，应用误差补偿理论拟合了中间体的峰形动力学曲线。

In view of the inaccutate transient current and voltage measurment data using domestic equipment in the present, the paper...

应用电磁场的原理，分析了测量数据误差产生的原因，并在频域下对数据进行了补偿，提高了测量数据的准确度。

Gradually accurate results of cogging force identification are shown, and the comparisons of tracking errors with and without cogging force compensation are also given.

所提出的方法已在气浮结构运动平台上进行了验证，给出了cogging力迭代标定的试验结果，对比了cogging力补偿前后的伺服控制跟踪误差。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。