计算误差

With the establishmentof the equivalent medium model, RTM-DRE was applied to study radiative transfer intransparent medium with scattering particles. By taking into account of absorption andscatter of particles, absorption of binder and reflection of interface, the apparent spectrumabsorption model of thermal control coatings was developed by RTM-DRE combined withMies theory. Validity, computational error and time of the model were validated andanalyzed. Furthermore, the apparent spectrum absorption characteristics of thermal controlcoatings were studied, and the influences of optical characteristics of binder and particles,volume fraction of particles, particles diameter, characteristics of interface, and incidentangle of irradiance were analyzed.

采用RTM-DRE研究热控涂层内辐射传递，结合Mie氏散射理论，考虑粒子吸收与散射、基料吸收、界面反射等因素影响，建立热控涂层表观光谱吸收率计算模型，验证计算模型的正确性，分析计算模型的计算误差与计算时间；在此基础上，通过计算热控涂层表观光谱吸收率来研究热控涂层表观光谱吸收特性，分析基料与粒子光学特性、粒子体积份额、粒径、界面反射特性、辐射能量入射角等因素的影响，初步研究空间环境因素对热控涂层表观光谱吸收特性的影响，采用系统灵敏度理论定量分析热控涂层表观光谱吸收特性变化对卫星温度的影响。

The regression equation can describe well the change of standard deviation of relative radiation error with solar zenith angle, standard deviation of height, and resolution of digital elevation model. The result demonstrates that it is necessary to consider terrain complexity when using moderate resolution of remotely sensed data.

利用拟合方程可以计算任意地形条件下，不同分辨率的卫星资料在不同太阳天顶角情况下，不考虑地形复杂性产生的平均地表入射太阳辐射的计算误差，结果表明，使用中分辨率的卫星资料计算地表太阳净辐射时，需要考虑地形复杂性。

With the theory, any straight lines and quadratic curve′s equidistance curve can be indirectly interpolated with the help of outline and wire circle′s information, it is unnecessary to calculate equidistance curve .

该理论直接利用轮廓曲线和丝圆的信息，不需计算等距曲线，间接实现任意直线和二次曲线的等距曲线的插补，有效地避免了传统计算等距曲线产生的计算误差，简化了数控机床控制程序设计，提高了机床的控制精度。

The numerical method of the diffusive-gray enclosure radiation heat transfer in complex geometry was studied, and its application was introduced into these two processes to improve the quality of handsaw and single crystal.

复杂结构的辐射换热计算所遇到的主要问题是：结构复杂导致计算量巨大；辐射角系数的计算因遮挡或数值计算误差而难以满足对称性和完整性，从而导致辐射换热计算不准确。

The equations for the helicoid and cross section of a ballscrew are worked out and a numerical integral method for the computation of the moment of inertia of the cross section is proposed.

建立了滚珠丝杠的螺旋面方程及横截面方程，提出一种精确计算滚珠丝杠横截面惯性矩的数值积分法，计算结果表明，传统的简化方法将造成20％以上的计算误差。

Based on the non-linear system and in the light of the characteristics of piecewise linearization of the bumper performance curve in the calculation of train coupling s,the calculation formulas are re-deduced by use of the basic principles of Newmark-β method.

基于非线性系统，针对列车连挂计算中缓冲器特性曲线分段线性化的特点，利用Newmark-β方法的基本原理重新推导计算公式，改进了传统的Newmark-β方法，改善了算法的稳定性，减小了计算误差，使之适用于列车连挂的计算。

Harvested area error of yield point is one of the main reasons to bring yield error in yield data collected by yield monitoring system.

采样周期内实际收割面积计算误差造成的产量数据误差是联合收割机计产数据中的一种常见误差。

The specific contents are as follows:Firstly, the causes of energy balance method result has some errors is analyzed. Then energy balance method is improved from the following aspects: the wind power input, the conductor self-damping, the damper dissipated power and vibration solution of Stockbridge dampers-conductor coupling system. So that improved energy balance method can consider more influential factors to enhance accuracy.

本文对输电线的微风振动控制和次档距振荡进行了多方面的研究，主要包括能量平衡法的改进、防振锤-输电线耦合系统的振动求解、阻尼线的耗能计算理论、微风振动的室内模拟试验、分裂导线微风振动的精细计算理论、多分裂导线的最大次档距和阻尼间隔棒优化布置等几部分，具体如下：首先分析了微风振动传统计算方法能量平衡法计算误差较大的原因，分别从风能输入功率、输电线自阻尼功率、防振锤消耗功率、输电线-防振锤耦合体系的振动求解等方面，对能量平衡法进行了改进，使能量平衡法可以考虑更多的影响因素以提高求解精度。

Calculation method of simply supported to continuous girder bridge is analyzed and compared with load test.

通过对预应力先简支后连续T形梁桥计算方法的研究，并与荷载试验进行对比分析，对预应力简支转连续结构设计计算的方法提出相关的建议，有利于减少计算误差，保证计算结果与实际情况相吻合。

The inner force of the line element for underground structure have been calculated using the traditional finite element mesh and high-order manifold method to guarantee the numerical precision of the line element and overcome the disadvantages due to the geometry error between the actual position and computational position of the beam and truss element in common use.

用传统的有限元网格和流形方法的高阶覆盖位移函数来进行地下结构的杆、梁单元计算，保证了线单元模拟的数值精度，同时又克服了常用的杆、梁线单元计算位置与实际位置不相符合从而带来计算误差和结构设计不便等缺点，提供了一种解决结构数值计算的较好的途径。

Breath, muscle contraction of the buttocks; arch body, as far as possible to hold his head, right leg straight towards the ceiling (peg-leg knee in order to avoid muscle tension).

呼气，收缩臀部肌肉；拱起身体，尽量抬起头来，右腿伸直朝向天花板（膝微屈，以避免肌肉紧张）。

The cost of moving grain food products was unchanged from May, but year over year are up 8%.

粮食产品的运输费用与5月份相比没有变化，但却比去年同期高8％。