表面

Filling –faced twills are those in which the picks predominate on the face of the fabric; warp- faced twills have a more evident warp on the surface .

纬面斜纹织物的表面由纬纱构成；经面斜纹的织物表面则经纱比较明显。它的表面渗出物很少。我们在池塘光滑的冰上溜冰。

An attempt was made to remove color from simulated wastewaters containing Acid Scarlet GR and Reactive violet K-3R by cloud point extraction using a nonionic surfactant of Triton X-114. The influence of the concentrations, equilibrium temperature and equilibrium time on the extraction efficiency was tested. The experimental results show that the extraction efficiency to dye increases with increasing concentration of TX-114 and salt or decreasing initial dye concentration.

本文选用非离子表面活性剂TX-114作浊点萃取剂，研究了由酸性大红与活性紫构成的单元和二元混合染料模拟有色废水的萃取脱色过程，讨论了表面活性剂浓度、染料浓度、盐浓度、平衡温度、平衡时间等因素对萃取效率的影响结果表明，提高表面活性剂浓度、盐浓度有利于提高萃取效率，而染料浓度增加则使萃取效率略有下降。

By adopting the technique of " making metal su*****ce flat and smooth with micro rheology " and the technique of " Ion Penetration Filling ", YG-ER Antifriction Metal Conditioner carries out fast regulation for the metal su*****c e of rubbing couples and forms a stiff and smooth metallic abrasion proof layer on the metal su*****ce under the rubbing effect, converting the friction between metals to that between metallic abrasion proof layers.

YG-ER 抗摩擦金属调理剂乃采用&微流变金属表面塑性整平&技术和&离子渗透填补&技术，对摩擦副金属表面进行快速调理，使金属表面在摩擦作用下形成一种坚硬、光滑的金属抗磨层，变金属与金属之间的摩擦为金属抗磨层与金属抗磨层之间的摩擦，以此克服金属摩擦带来的负面影响。

It can be concluded from the above experiment results that for the auxiliaryheated arc plasma generator, an area which has uniform temperature distribution andhigher temperature. In this area, the diameter of the key arc root increases and thiscondition is beneficial to reduce the cathode erosion. At the same time, it is animportant segment for the secondary arc to rotate on the cathode surface and to heatthe surface for the auxiliary heated arc plasma generator.

总结上面的实验结果可以看出：在辅助加热电弧等离子体发生器中，利用辅助电弧对阴极表面的加热作用，能够在阴极表面形成一个温度较高且分布均匀的区域；在温度较高的区域内，主弧弧根直径增大，这种情形有利于减小阴极烧损；同时，辅助电弧旋转加热阴极表面是辅助加热电弧等离子体发生器的一个重要环节。

Arc plasma has many advantages, such as high temperature、 high energydensity and so on. It has been applied in the field of cutting、 welding、 metallurgyand material prepared etc, but there is a long-term problem in the field of the arcplasma technology, which is how to reduce cathode erosion to increase the life-timeof arc plasma generator, so many scholars in the world have been studying theproblem on the cathode erosion.

电弧等离子体具有温度高、能量密度大和对环境污染小等特点，它已被广泛应用于切割、焊接、冶金、材料制备等领域，但是在电弧等离子体技术中，怎样减少阴极烧损提高等离子体发生器的寿命是电弧等离子体技术中一个长期问题，因而国内外的许多学者仍在对阴极烧损这个问题进行研究；本文围绕&通过提高阴极表面温度，增强阴极表面的电子发射能力，来增大阴极弧根直径，进而降低电弧通过阴极弧根传入阴极表面的有效比热流，以达到减小阴极烧损的目的。&

Ceramic bearings can produce oxidation-ho, silicon carbide, silicon nitride and so on, diameter from 3mm-50mm, precision Machinable P0, P6, P5 level; its performance characteristics are: high temperature, oil-free self-lubricating, acid, alkali and salt corrosion , wear resistance, low noise, insulating diamagnetic, since high-speed operation; metal nano-ceramic bearing its production process for a new generation of high content of nano-particles in the heat and pressure infiltration of metal surface is activated to fill the cracks and pits the metal so that 3-5 micron metal surface is more smooth solid surface, greatly reduce the friction, improve Chennai base metals, and greatly increased the life span of bearings, and its characteristics are: long life (as an ordinary stainless steel bearings 2 -- 10-fold), low noise (as an ordinary stainless steel bearings, 70%), wear-resisting, acid, alkali, salt corrosion, high temperature, load large; ceramic bearing and metal nano-ceramic bearing design and development to meet the needs of the market for high-speed, low - noise, high load, the demand for corrosion-resistant; Machinery Production Department to produce aircraft rod end joint bearing, linear guide bearings, the fuel tank of earrings, plastic bearing, non-standard side bearing components, glass door hardware, such as high-precision control products; and provide CNC machining.

陶瓷轴承可生产氧化镐、碳化硅、氮化硅等，内径从3mm-50mm，精度可加工P0、P6、P5级；其性能特点为：耐高温、无油自润滑、耐酸、碱、盐腐蚀、耐磨、低噪音、绝缘抗磁、起高速运转；金属纳米陶瓷轴承其生产工艺为新一代的高含量纳米级微粒在热和压力的作用下被激活渗入金属表面，填补金属缝隙和凹坑，使金属表面3-5微米表面更光滑坚固，大大降低其摩擦力，提高金属的奈酸碱性，并大大提高了轴承的寿命，其特性为：长寿命（为普通不锈钢轴承的2-10倍）、低噪音（为普通不锈钢轴承的70%）、耐磨、耐酸、碱、盐腐蚀、耐高温、负载大；陶瓷轴承与金属纳米陶瓷轴承的设计开发以满足市场对高转速、低噪音、高负载、耐腐蚀的需求；机械生产部以生产机杆端关节轴承、直线导轨轴承、油缸耳环、塑料轴承、非标端轴承零部件、玻璃门控五金等高精度产品；并对外提供数控加工。

The results of these analysis show that the initial stress of steel stiffened girder has a significant impact on maximum vertical displacement, maximum tensile stress of pavement surface and maximum shear stress of binding course; the deformation of steel stiffened girder has a significant impact on shear stress of binding course; heavy-vehicle load can increase each control index rapidly; the horizontal force of vehicle load has a significant impact on longitudinal tensile stress of pavement surface and longitudinal shear stress of binding course.

分析结果表明钢加劲梁初始应力对铺装层表面最大竖向位移、铺装层表面最大拉应力与粘结层最大剪应力均有显著影响；钢加劲梁变形对粘结层剪应力影响显著；重车荷载将使各控制指标均急剧增加；车辆荷载的水平力则对铺装层表面纵向拉应力与粘结层纵向剪应力影响显著。

With the growing emergence of high-tech enterprises in globalization and development, as well as the direction of the user for products and spare parts requirements of the surface of the continuous improvement of treatment, I digestion and absorption of domestic and foreign companies active Abrator latest technology, combined with the company's own strengths, development developed different models use shot blasting cleaning machine, with its superior performance, reliable quality, to win the trust of the vast number of users, allowing users access to the most reasonable surface treatment technology, the best surface quality and best efficiency.

随着高新技术的日益涌现和企业趋向全球化方向发展以及用户对产品和零部件的表面处理要求的不断提高，我公司积极消化吸收国内外最新的抛丸清理技术，结合公司的自身优势，研制开发了不同型号用途的抛丸清理机，以其优越的性能、可靠的品质，赢得了广大用户的信赖，使用户获得最合理的表面处理工艺、最优的表面质量和最佳的效率。

A washer has a body having an axis and provided with a first bearing face surface located at one axial side and adapted to cooperate with a nut, a second bearing face surface located at an opposite axial side and adapted to cooperate with an object, at least one third turning resistant surface adapted to cooperate with a thread of the bolt, the body having at least one resistive point arranged so that when the nut is turned and turns the bolt the body of the washer stops the bolt from turning and thereby the nut creates a pull on the bolt which elongates the bolt in an axial direction and applies to the body of the washer an axial force which overcomes the at least one resistive point so that a portion of the body of the washer is allowed to be pulled axially when the bolt elongates.

一种放在螺帽与物体之间的垫圈，螺帽与螺栓螺纹连接，螺栓插入在包括两个装配的部件的物体内，垫圈具有主体，和设有第一支承面表面，位于一个轴向侧面和与螺帽配合，第二支承面表面，位于相对的轴向侧面和与物体配合，以及至少一个第三转动阻力表面，与螺栓的螺纹配合，从而使螺帽以给定的扭矩在一个方向转动同时垫圈的主体沿相对方向接收给定的力时，仅有螺帽转动，以紧固或松开螺栓，而垫圈的主体和螺栓保持静止。

A series of emulsion fuel oil were designed with Triton X 100 as principal emulsifying agent,whose molecular formula is C 8H 17 ——O(CH 2CH 2O) 10 H.One of other kinds of surfactant is used as the auxiliary emulsifying agent.The emulsion structures were determined by micrography,and the combustion heat was determined by a bomb calorimeter.

以具有聚氧乙烯为亲水基团的非离子表面活性剂为主要乳化剂，其它表面活性剂每种类型各取一个与之复配，进行替换对比，从而以最少的表面活性剂种类，得到尽可能全面的乳液结构类型，以便找出乳液结构与乳化燃油燃烧热之间的关系。

I can not make it blossom and suits me

我不能让树为我开花

When temperatures are above approximately 80 °C discolouration of the raceways or rolling elements is a frequent feature.

当温度高于 80 °C 左右时，滚道或滚动元件褪色是很常见的特征。