膜的

Expression of the IL-6 had more positive signs in chorion with chorioamnionitis, especially in infiltrating inflammatory cells.

早产两组的胎膜组织中，有绒毛膜羊膜炎者，在绒毛膜层有较多的IL-6蛋白表达，在侵入绒毛膜的炎性细胞胞浆中，IL-6表达更明显。

Based on these facts, the properties of films regenerated from new aq. alkali soluble cellulose/NaOH solution with sulfuric acid as coagulator were studied. The structure and morphology of the film was characterized by SEM, and also the influence of coagulator concentration on the film property was studied.

在此基础上，对新型碱可溶纤维素/NaOH水溶液体系在以硫酸水溶液为凝固剂时所成膜的性能进行了研究，采用SEM电镜对膜的结构与形态进行了分析表征，研究了凝固剂浓度对膜性能的影响。

Transmission Electron Microscope and other properties testing results show that the complex emulsifier system is the crucial influence factor of the polymerization process and the properties of products. It may influence the coagulum content and reaction rate of the polymerization process, the performance, particle diameter,viscosity, electrolyte stability and storage stability of the emulsion products and the contact angle of the film.The initiator mainly influences the coagulum content and reaction rate.The acrylic monomers mainly influence the solid content, Minimum Film Formation Temperature of the emulsion and the Glass Transition Temperature of the film.The organic silicone monomer mainly influences the water absorption of the film.The reaction temperature mainly influences the reaction rate and conversion.The stirring intensity mainly influences the coagulum content of the polymerization process.

透射电镜等性能测试结果显示：复合乳化剂体系是硅丙共聚乳液的聚合过程及产品性能的主要影响因素，它可以对聚合过程的凝胶率、反应速率以及乳液的外观、粒径、粘度、耐电解质稳定性及贮存稳定性，还有乳液涂膜的接触角等造成不同程度的影响；引发剂主要影响反应速率和凝胶率；丙烯酸酯单体主要影响到乳液的固含量、最低成膜温度以及涂膜的玻璃化转变温度，有机硅单体主要影响涂膜的吸水率等；聚合反应温度主要影响乳液的反应速率和转化率等；搅拌强度主要是影响到聚合过程的凝胶率。

Compared with that of 3Cr13 alloy, the oxidation resistance of the composites containing 5 vol.％TiC particle was improved greatly at 850℃, but the improvement was relatively limited at 950℃. But the oxidation resistance of 1Cr18Ni9 composites containing 5 vol.％ TiC particle was obviously improved at 950℃, and at 850℃ the improvement is not large. The TiC particle can improve the oxidation resistance mainly was by developing the oxidation selectiveness of the Cr element as to change the phase constitution of the oxidation film, to alleviate the production of the stress in the oxidation film and to improve the cohesive force of the oxidation film or matrix interface and the chemical combination of the oxidation film.

与3Cr13合金相比，含5％volTiC颗粒的复合材料在850℃的抗氧化性能得到大幅度提高，而在950℃复合材料的抗氧化性能提高作用却是有限的；与1Cr18Ni9合金相比，含5％volTiC颗粒的复合材料在850℃的抗氧化性能略有提高，而950℃复合材料的抗氧化性能提高却是明显的；TiC颗粒可以提高两种基体合金抗氧化性能，主要是通过促进Cr的选择性氧化，进而改变氧化膜的相组成、减缓氧化膜内应力的产生、增加氧化膜/基体界面凝聚力及提高氧化膜化学结合力而实现的。

Detailed descriptions of metallized safety-membrane of T Pattern and Mosaic Pattern are given with their advantage and shortcoming compared.

详细叙述了 T型金属化安全膜和网格状金属化安全膜的优点和缺点，并对金属化安全膜在初期应用中出现的问题进行了介绍。

The results show that when it comes to shielding of electromagnetic radiation in different wavebands,both the imported and China made E...

本文通过实验的方法，在某商品屏和样品屏上分别采用进口与国产EMI屏蔽膜进行测量对比，结果表明二者的EMI屏蔽膜对电磁辐射的屏蔽效果相当，基本都能将规定的不同频段的电磁辐射降到限值以下，而对于非三基色波段的光的吸收能力，进口EMI屏蔽膜的吸收效果要好于国产EMI屏蔽膜的吸收效果。

The effects of coating temperature,dry conditions and immersion time on the performance of membranes were systematically investigated through experiment in SiO2 inorganic membranes prepared by the solgel method.

通过实验考察了在用溶胶-凝胶法制备二氧化硅无机膜的过程中涂膜温度、干燥条件及浸没时间对膜性能的影响。

In order to improve the moisture permeability of polyurethane film and its serviceability,PU film manufactured by wet film forming process was modified by wool powder which was made through chemical and mechanical methods by researchers themselves.

为改善聚氨酯膜的透湿性，提高聚氨酯合成革的服用性能，用羊毛粉体改性聚氨酯，在一定条件下采用湿法成膜制成了PU膜。

EDAX and talysurf. There were four wear regimes for KRF/GCI, during the starting friction period abrasion was dominant, when the process of the formation and break of transfer layers was balanced the main wear mechanisms were adhesion and fatigue, mild melt wear was found at higher temperature. For KRF/MMC, the dominant wear mechanisms were ploughing and microcuting during the running-in, when transfer layer formed, the film-film adhesion at the interface became dominant and mild melt wear occurred also at high temperature.

对于KRF/GCI，在摩擦的起始阶段主要是二体磨粒磨损，当表面转移膜的形成与破坏形成动态平衡时，粘着磨损和疲劳磨损是主要磨损机理，摩擦表面温度较高时，产生严重的粘着磨损和轻微的熔融磨损；而KRF/MMC在跑合过程中，SiCp对较软材料的犁削、微切削是主要摩擦磨损机理，转移膜形成后，表面的膜—膜粘着则为主要摩擦磨损机理，高温下也会发生轻微的熔融。

Hot cathode glow discharge chemical vapor deposition is a new method to deposit high quality diamond films with high deposition rate.

中文题名热阴极辉光放电及其等离子体化学气相沉积金刚石膜研究副题名外文题名 Study of hot cathode glow discharge and its plasma chemical vapor deposition of diamond films 论文作者白亦真导师金曾孙教授学科专业凝聚态物理研究领域\研究方向学位级别博士学位授予单位吉林大学学位授予日期2001 论文页码总数139，10页关键词金刚石膜薄膜制备热阴极辉光放电等离子体化学气相沉积馆藏号BSLW /2003 /TB43 /1 热阴极辉光放电等离子体化学气相沉积是我们建立的快速沉积高品质金刚石膜的新方法。

Neither the killing of Mr Zarqawi nor any breakthrough on the political front will stop the insurgency and the fratricidal murders in their tracks.

在对危险的南部地区访问时，他斥责什叶派民兵领导人对中央集权的挑衅行为。

In fact,I've got him on the satellite mobile right now.

实际上 我们已接通卫星可视电话了