膜层

The micro movement of deposited cluster and the microstructure evolution of thin film have been studied in dimension of atom-cluster in this paper. There are some important applications to do deeply research on the migration, coacervation and nucleation of atom cluster, to optimize the deposition process, to enhance the characteristics of thin film.

在原子尺度上揭示膜层形成初期粒子的微观变化过程及膜层微观结构的演化规律，对深入了解表面粒子的迁移、吸附和成核，对改进和优化薄膜生长工艺、提高薄膜质量、改善薄膜性质具有重要意义。

We presented the method of selecting the multilayer materials for the neutron supermirrors in this paper.

综合考虑中子的散射长度密度和吸收截面的作用，设计了一种中子多层膜膜层材料的选择方法。

Ti/TiN/N/ZrN multi-layer film is deposited on head of rotated riveter by using multi-arc ion plating method.

采用多弧离子镀法在旋铆头沉积Ti/TiN/N/ZrN多层膜处理，并对旋铆头的失效形式、膜层的组织形貌、显微硬度、耐磨性能进行了分析和讨论。

The changes of morphology and mass in the process of pretreatment,the morphology and the phase constitution of chemical conversion film formed by stannate were studied using scanning electron microscope,X-ray diffraction and the mass loss method.

利用扫描电镜、X射线衍射和质量损失等手段，研究预处理前后的表面形貌及质量变化和锡酸盐化学转化膜层表面形貌及其相组成，采用盐雾和湿热实验箱检验膜层的抗腐蚀性能。

In order to enhance the anti-corrosive performance of ZK60 magnesium alloy,the chemical conversion coating s on ZK60 magnesium alloy obtained from phosphate or stannate solutions were studied.

结果表明：在磷酸盐溶液中，当处理温度为50℃时，磷化30min后试样的电荷转移电阻为224.03Ω·cm2；当温度为80℃，反应时间为45min时，所得转换膜的Rct为377.67Ω·cm2，阻值最大，耐腐蚀性能最好；对于锡酸盐化学转化膜，90℃下，处理60min的膜层耐蚀性能最好，其Rct为388.32Ω·cm2，与磷酸盐化学转化膜相比，两种膜的保护性能相差不大。

Fluxible PAA solution is deposited on quartz glass substrate by MicroPendirect-writing deposition process and imidized to polyimide sacrificial layer in oven;Au paste structural layers are fabricated by MicroPen direct-writing deposition technology,and finally released by oxygen plasma dry etching process.Technological procedures and mechanisms of the LMM direct writing technology arestudied systematically by theory analysis and experiments.

在设备和材料体系基础(来源：A70BC论0c文网www.abclunwen.com)上，系统研究了基于激光-微笔／微喷直写工艺集成制造MEMS牺牲层、结构层及导电电极图形的工艺机理和质量控制规律，结果表明：(1)笔头内径、笔头与基片间距、驱动气压和直写速度是影响微笔直写沉积膜层线宽、膜厚及表面形貌的主要工艺因素。

The abilities of corrsion resistance of many kinds of accessories after different surface disposed and dealed with the BH-102 hydrophobe agent had been studied.

为防止金属零件腐蚀，通常在一些零件表面进行处理(如电镀层、转化膜层等)，但是有些膜层存在着孔隙等缺陷，环境中的水分子会沿着孔隙扩散到基体而引起材料腐蚀。

At this point, sheet resistivity is minimal. Meanwhile, TCR and the refiring change ratio is near to zero. Compound inorganic binder was put forward firstly. The controllable regulation on refiring change ratio can be acquired by linear principle. When the volume ratio is 1:1, the best sintering temperature is 865℃.

实验发现，复合无机粘结相对膜层电性能和重烧变化率的影响近似满足线性复合效应；采用体积比为1：1的钙铝硅玻璃和铅硼硅玻璃作为复合无机粘结相，最佳烧结温度在865℃；铅硼硅玻璃与钌酸铋置换反应生成钌酸铅&过渡层&，实现界面的渐变，使膜层性能得到改善。

Inthis paper, a new method is presented, in which we measure the thickness ofsurface film layer by means of measuring the distance between correspondingtwo dark lines in two groups of white light interference fringes that are res-Pectively produced by two beam reflected by two surface of the thin filmlayer and another beam coming from another arm in Michelson interferome-t...

本文提出一种新方法，它利用迈克耳逊干涉光路，通过对膜层前后两表面反射光束和来自另一臂的反射光束产生的两组白光干涉纹黑线间隔的测量，即可得到表面膜层的厚度、这种测量方法迅速、简便、设备简单、精确度高、不损伤膜层表面，适合在实验室和工厂广泛应用。

The properties of various water soluble, oil and wax lubricants for gold and silver platings were compared, and different coating methods were adopted to improve their performance.

对比研究加速硫化膜层与自然暴露的镀银、锡磷青铜表面膜层的微动特性，分析单一气体加速模拟对自然腐蚀膜层研究的可用性。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。