耐高温

Excellent capability for preventing causticity, passing such test as acid,alkali,impregnant,high temperature.

优良的耐环境性能，经过耐酸、耐碱、耐溶剂、温度循环、高温等环境测试，膜层无明显变化。

High temperature in the following with good wear resistance, corrosion resistance and cavitation resistance capacity.

在500℃高温以下具有良好的耐磨损、耐腐蚀和耐气蚀能力。

However, common polyacrylate emulsion has some disadvantages such as poor water-resistance, poor film-forming in low temperature, becoming pastiness in high temperature, polluting environment with emulsifier and so on.

由于聚丙烯酸酯乳液具有耐热、耐光和耐老化等优点在涂料工业中得到了广泛的应用，但普通的聚丙烯酸酯乳液还存在耐水性差、低温下不易成膜、高温发粘以及含乳化剂的废液会对环境造成污染等缺点，因此，本文结合无皂乳液聚合和核壳乳液聚合技术，合成了聚丙烯酸丁酯/丙烯酸钠齐聚物，并以此为乳化剂，采用种子半连续法合成了以聚丙烯酸丁酯为核，聚甲基丙烯酸甲酯-苯乙烯为壳的无皂核壳聚丙烯酸酯乳液。

High-temperature furnace refractories: mainly mullite, corundum, silicon carbide, sillimanite products such as materials, widely used in various electric kiln, furnace (push plate tunnel kiln, shuttle kiln,) and the general coal, oil , gas heat furnace and so on, have a high refractoriness, high temperature strength, thermal shock stability and corrosion resistance, is an ideal high-temperature furnace refractories.

三。高温窑炉耐火材料：主要有莫来石、刚玉、碳化硅、硅线石等材质的制品，广泛应用于各种电窑、电炉和一般煤、油、气高温窑炉等，具有较高的耐火度、高温强度、热震稳定性和耐腐蚀性，是理想的高温窑炉耐火材料。

Strain 38A (determined as Candida tropicalis)can grow in media at high osmotic pressure (Glucose 60%, NaCl 14%), at high temperature(45℃), in high alcohol(14%). Glucose fermentation experiment indicated that its fermentive period is short in primary, and alcoholicity is 8.5,with potential application prospect.

菌株38A耐60%的葡萄糖，耐45℃高温，耐14%NaCl，耐乙醇14%；葡萄糖发酵实验表明，该菌株起酵快，产酒度达8.5%，有潜在的应用价值。

In the dissertation, a new stabilization method, equal-density method was adopted to prepare modified asphalts with storage stability at high temperature. In this method, a compound was prepared by premixing polymer and filler, and the compound was mixed with asphalt to prepare Polymer-Modified Asphalt by changing the ratio of polymer and filler. The asphalts with good storage stability were formed with the addition of filler, by regulating the density difference between polymer and asphalt. With identifying the effect of composition factor and the technique conditions on mechanical properties of polymer/filler compound and the molecular distribution of the polymer, identifying the effect of composition factor and the technique conditions on the properties and structure of polymer/filler modified asphalt, Styrene-Butadiene-Styrene copolymer, Low Density PolyEthylene, Styrene-Ethylene-Butadiene-Styrene block copolymer modified asphalts with good storage stability and performance were prepared. Rheological method, gel content analysis and swelling measurement were adopted to elucidate the interaction between the polymer and filler. Filler reduced the difference between the polymer and asphalt with the premixing technique, which led to the improvement of the storage stability of the modified asphalts. The thermo-oxidative aging process of base asphalt and PMA were studied and the effect of antioxidant additives on the base asphalt and PMA were analyzed.

本论文采用等密度方法，即预先混合聚合物与填料制备复合物，复合物在沥青中会吸收油份而溶胀，改变填料的用量从而调节聚合物与沥青的密度差异的方法，制备出高温贮存稳定的改性沥青，并研究了工艺条件和配方因素对聚合物/填料复合物力学和聚合物分子量分布的影响，系统考察了工艺条件和配方因素对聚合物/填料改性沥青性能与形态结构的影响，研制出性能优良、高温贮存稳定的苯乙烯-丁二烯-苯乙烯三嵌段共聚物、氢化SBS、低密度聚乙烯改性沥青，并通过流变学分析方法及凝胶和溶胀测试探讨了聚合物与填料的相互作用，指出经过预混工艺填料改变了聚合物与沥青的密度差异，以此说明聚合物/填料改性沥青高温贮存稳定的原因；研究了基质沥青和聚合物改性沥青热氧老化过程，并分析了抗氧剂对基质沥青及聚合物改性沥青的影响，探讨了抗氧剂提高沥青耐老化性能的原因。

A and Japan standard, Ventilation Aging Tester, Humidity Tester, Light Fastness Tester, Weatherproof Tester, Brine Spray Tester, Salt Dry-wet Compound Erosion Tester, Programmable C onstant Temperature and Humidity Tester, Thermal Shock Tester, Car-light Vibration Simulative Tester, Precise Hot Wind Circulation Tester, Vacuum Oven, High-temperature Furnace etc.

在菖鸿科技专业团队的努力下、已成功针对可靠性及环境仿真系列之产品，诸如耐水试验机、耐尘试验机、换气式老化试验机、湿润试验机、耐光试验机、耐候试验机、盐水喷雾试验机、盐干湿复合式腐蚀试验机、可程式恒温恒湿试验机、冷热冲击试验机、车灯振动模拟试验机/车灯冲击试验机、精密型热风循环干燥箱、真空烘箱、高温炉等。。。

Based on space-charge effect,I choose different diode model when diodes have different base doping concentration,analyzing the main factors impacting temperature coefficient of the diode,testing diodes with different angle lap,analysis of the blocked characteristics of diode in high temperature.

快恢复二极管的生产中发现大量的反向耐压呈现负温度系数的管芯，本文从空间电荷效应的角度，对基区掺杂浓度不同的管芯采用不同的二极管模型，分析管芯在高温情况下影响二极管反向耐压主要因素；并且对不同磨角的管芯进行测试，分析对二极管高温阻断特性的影响。

a new high temperature anti-static coating was prepared using inorganic acid aluminum phosphate binder for the film-forming material, fused quartz powder for high temperature resistance filler, OP-10 for non-ionic surfactant, magnesium oxide and zinc oxide as a curing agent, tin oxide for conductive filler.

以酸性磷酸铝无机黏结剂为成膜物，电熔石英粉为耐高温填料

Compared with ordinary quartz, owing to nanoscale alumina crystallite, the artificial stone made of TISM nanoscale microcrystallite quartz can stand higher temperature (as high as 800℃ instantly), become harder (reaching 6 according to mohs hardness scale), and enjoy better plasticity because of nano alumina crystallite's good mouldability.

帝斯曼TISM纳米微晶石英石同普通石英石相比，由於增添了纳米氧化铝微晶粒子，整体板材更耐高温（暂态耐温度可达到800摄氏度以上），硬度更大（莫氏硬度达到6以上），同时结合纳米氧化铝微晶粒子在抗拉伸疲劳中出现可塑性形变的特点，所以整体板材相对于普通石英石韧性更好、可塑性更高，更不易开裂。

And Pharaoh spoke to Joseph, saying, Your father and your brothers have come to you.

47：5 法老对约瑟说，你父亲和你弟兄们到你这里来了。

Additionally, the approximate flattening of surface strip using lines linking midpoints on perpendicular lines between geodesic curves and the unconditional extreme value method are discussed.

提出了用测地线方程、曲面上两点间短程线来计算膜结构曲面测地线的方法，同时，采用测地线间垂线的中点连线和用无约束极值法进行空间条状曲面近似展开的分析。