结构化

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component. For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper. For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space state informatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision. Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为（n-1）维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料（单质材料作为特殊的功能梯度材料看待）、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

This paper presents an IFMC CAD model that consits of a geometry model and a material model, in which the geometry space acts as a base space and the material space acts as a bundle space. In this CAD model, the geometry model is based on the non-manifold model. In addition, a half-face data sturucture, which is derived from the half-edge data structure with the non-manifold feature of IFMC taken into account, is adopted to represent the geometry and topology information of the component.For the material model of IFMC, this paper focuses on the FGM component representation firstly and present a simplex-subdivision based CAD data exchange format, in which the material information is represented as a (n-1) simplex and material .distributing feature is represented by the interpolation on the simplex-subdivision. Based on those, a part-building orientation optimization algorithm and an adaptive slicing algorithm for FGM component are presented in the paper.For the IFMC material model, the IFMC material information representation is divided into a meso-scale and a macro-scale representation. In the meso-scale, a concept named parameterized periodic functional meso-structure is presented as a unique form to represent the FGM (the homogeneous materials are regarded as a special FGM), the composite and the functional meso-structure material. The model of PMS is a three-tuple that contains the space stateinformatation, the material parameter and the material meso-scale distribution feature. The macro-scale material information representation is similar to the FGM components by interpolation of the control parameter of the periodical functional meso-structure based on the simplex-subdivision.Through an example of manufacturing-oriented IFMC CAD data processing, it is proved that the IFMC CAD model and the material information representation and process method proposed in this paper can provide a reliable data support for IFMC digital concurrent design and manufacturing.

本文将理想材料零件CAD模型建立在以几何空间为底空间、以材料空间为丛空间的结构上，使用非流形几何模型作为理想材料零件几何拓扑模型的基础，并在半边数据结构基础上，针对理想材料零件的非流形特征局限内部边界上的特点，给出了一个半面数据结构来表述零件的几何拓扑信息；对于理想材料零件的材料模型，本文先从功能梯度材料零件的信息表述与CAD数据交换和处理入手，将材料信息表述为(n-1)维单纯形，然后通过对三维几何区域的单纯剖分，以插值的方式表述零件材料分布特征；在此基础上，根据功能梯度材料零件分层制造中对CAD数据处理的要求，给出了综合考虑零件几何特征与材料特征的生长方向优化算法和自适应切片算法；而对于文中所定义的理想材料零件，本文将其材料信息表述分解到细观和宏观两个尺度进行，首先给出了细观尺度上参数化的周期性功能细结构概念，以此来统一表述功能梯度材料(单质材料作为特殊的功能梯度材料看待)、复合材料和功能细结构材料；把周期性功能细结构模型化为一个包含空间状态信息、材料构成参数和材料细观分布特征参数的三元组，以表达零件的细观材料特征；对于零件宏观的材料变化特征，则同样在几何区域单纯剖分的基础上，通过对细观尺度上周期性功能细结构控制参数的插值来完成；通过理想材料零件CAD数据处理的算例，验证了本文中理想材料零件CAD模型及材料信息表述与处理方法完全可以为理想材料零件的数字化制造提供可靠的数据支持。

This thesis studies a widely used first order optimzation algorithm--Sequential Linear Programming method, SLP is modify so that it can solve structural and shape optimization problems more efficiently, including continuous and dsicrete variables problems. Finally the zeroth order optimization method is presented for two dimensional shape optimization problems.

本研究将从一般广为设计者所采用的一次最佳化方法--线性序列规划法的修正研究，以使其更稳定且更有效率地解决在一般结构与形态最佳化问题，包含有连续式及非连续式设计变数的最佳化问题演算过程，最后应用零次最佳化方法概念在二维形态最佳化设计上。

Compared with the previous method, the improved route can provide directly a spheroid form of immobilized lipase particles of which the size can be controlled by adding non-ionic surfactants during the preparation process so as to increase the recovery rate of enzyme as well as decrease the external diffusional restriction which can diminish the enzyme activity. The improved method can also alter the hydrophobicity and microstructure of the immobilized enzyme matrix by changing the molar ratios of different alkoxyl silanes so as to enhance the enzyme activity by a"surface active effect"and eliminating the internal diffusional restriction.

与前人的制备方法相比，改进的方法可直接制得球形的固定化酶颗粒，而且颗粒的大小可以通过在制备过程中加入非离子型表面活性剂加以控制，从而可以提高固定化过程的酶活回收率和减小外扩散效应对酶的表观催化活力的影响；改进的方法还可以通过改变原料硅氧烷的种类及配比来改变最终制得的固定化载体的疏水性质及微观结构，从而通过对脂肪酶的&界面活化&作用和减小内扩散效应提高固定化脂肪酶的表观酯化活力。

In chapter Ⅰ, a historial review of structure control is given; In chapter Ⅱ, A discussion of the controllability and observablity of flexible structures is given, Two kinds of controllability and observablity index are defined, and applied to actuator allocation; chapter Ⅲ considers the reduction of high order flexible structure mode; the content of chapter Ⅳ is about the basic problem of distributed parameter control system design. It is proved that a stable controllor in mode space may be unstable in real use in distributed paramater systems, also, by closed loop mode concept, a pole assignment method of flexible structure controllor design is given; chapter Ⅴ is about the low-authority controllor design, it is pointed out by use of high order eigenvalue/eigenvector perturbation, a better controllor can be designed; chapter Ⅳ considers flexible structure reduced order control; chapter Ⅶ disscusses the basic problem of flexible structure computer control, analyses discreate controllablity and observablity and its computing, the sample period and coefficient wordlength; chapter Ⅷ is on the problem of low flexibility compensation; chapter Ⅸ is a design example.

在第一章简要回顾了挠性结构控制的历史，并且指出控制中的一些问题；第二章讨论了挠性结构的能控性与能观性，定义了两类能控性程度和能观性程度指标，还将能控性程度概念应用于执行器位置的确定；第三章论述了高阶模型的降价问题，比较了适于挠性结构模型降阶的方法，指出其适用范围；第四章内容是分布参数系统设计的基本问题，首先证明在模态空间中设计的稳定的控制器在实际分布系统上可能是不稳定的，进而根据闭环模态的概念，获得挠性结构控制器设计的极点配置方法；第五章的内容是关于低权控制器的设计问题，指出利用特征值高价摄动和特征向量的摄动，可以设计出更加完善的低权控制器；第六章讨论挠性结构降阶控制问题；第七章讨论挠性结构计算机控制的基本问题，分析了时间离散化模型的能控性和能观性及其计算问题，讨论了采样周期选择和系数字长问题；第八章讨论低挠性结构的补偿问题；第九章的设计例子用来说明第二章和第四章的结果。

The results show that the SAPO–5 has a pillar-like morphology with the size of about 20 μm×5 μm×5 μm.The ratio of P:Al:Si is 1:1.19:0.67 in its crystal structure, the content of Si is high. The total acidimety fo the SAPO–5 is 578.0 μmol/g , hihger than that of prepared by one step crystalline hydrothermal method.And its initial catalysis character performance on normal butane isomerization reaction reach 24.8 %, higher than that of prepared by one step crystalline hydrothermal method.

实验结果表明：产物为柱状的磷酸硅铝分子筛，其晶粒尺寸大约为20 μm×5 μm×5 μm，其晶体结构中P：Al：Si＝1：1.19：0.67，硅含量较高；采用分段晶化方式制备的SAPO-5分子筛的总酸量为578.0 μmol/g高于一段晶化方式制备的SAPO-5分子筛的总酸量；采用分段晶化生成的SAPO-5分子筛的催化正丁烷异构化反应初始活性可达到24.8 %，远高于一段晶化制备的SAPO-5分子筛的初始活性14.1 %。

The osculations are conducted on the two-dimensional hydrofoil section,based on a single-fluid model of the cavitation:the liquid/vapor mixture is considered as a homogeneous fluid whose eompsition is regulated by mass tranfer equation.The RNG k-ε turbulence model with modified eddy viscosity coefficient is used for computing,and the coefficient is related to the vapor and liquid densities in cavitated regions for simulating the cavitating flow.

实验采用高速录像技术观察了云状空化随时间的结构变化，应用 LDV 测量了云状空化条件下翼型周围的速度分布；采用 N-S 方程和基于空泡动力学方程的空化模型计算了绕水翼云状空化流场，湍流模型采用了 RNG k-ε方程，为了改善空化流动的计算精度，引入了一种与空化区域水汽相密度相关的系数，对湍流涡黏性系数进行了修正。

The fourth part examines the semantic features of AN structure. It is concluded that AN structure is metric and its origin is that AN structure is transmitting structure with weak function. That is to say, because referential meaning of N is weak and declarative meaning is strong, N is made to be close to A to make the structure deviate in function. AN structure in sentences metricizes the attribute of verbs and it has the constraints of structural meaning on the internal structure of AN and VP.

第四部分考察AN结构的语义特征，得出：AN结构具有量度义，其来源是因为AN结构是弱功能传递型结构，即&N&的指称义弱，事物性虚弱、语义内容抽象，A的陈述义强，使得N向A靠拢，才使得由其构成的偏正结构在表述功能上发生了偏离，使整个短语性状化，具有了量度义；AN结构入句后表示对动作某方面属性的度量，这一格式义对AN结构内部、VP具有制约作用。

Apart f rom the much2discussed nominalization of processes and properties , clauses , circumstantial element s and relators are subject to nominalization. Different types of nominalization are characterized with their own internal st ructures.

除了备受关注的过程和特征的名词化之外，小句的名词化、环境成分的名词化、连词的名词化都属于不同类型的名词化形式，其内部语法结构都有各自的特点。

The thermal boundary condition of the cast iron cooling stave with surface alloyed steel pipe was used for numerical simulation of temperature field and commercial software ANSYS and the method of coupling heat-structure were used to calculate thermal deformation of steel pipe at high temperature,and analyze the influence of air gap and thermal deformation on the life of cooling stave.The optimal size of air gap and hot load to guarantee long life of cast iron cooling stave were obtained.

根据合金化管铸铁冷却壁热态试验数据确定了合金化管铸铁冷却壁温度场数值模拟的边界条件，利用ANSYS软件、采用热-结构耦合的方法计算了高温状态下合金化管铸铁冷却壁内钢质冷却水管的变形，分析了气隙层和水管热变形对合金化管铸铁冷却壁寿命的影响，得出保证合金化管铸铁冷却壁长寿的最佳气隙层厚度和相应的最佳使用热负荷。

Plunder melds and run with this jewel!

掠夺melds和运行与此宝石！

My dream is to be a crazy growing tree and extend at the edge between the city and the forest.

此刻，也许正是在通往天国的路上，我体验着这白色的晕旋。