结构体

Using the information from exploratory adit can class rock mass structure, drawing lessons from internal successful experiences in rock mass quality and weathering zone classification, dam abutment rock mass is classed by choosing quantization indices of rock mass structure, the outcome same as investigation, accord with commonly geoloical rule. Using the information from slope image can finish stability analysis of lithologic slope, get 3-D cutaway view and date, it is important datum for research engineering geoloical condition of dam abutment rock mass.

利用勘探平洞洞壁图片采集的结构面信息处理成坝肩岩体结构研究的基本量化指标及实体模型，进行拉西瓦水电站坝肩岩体结构类型划分，并借鉴国内岩体风化分带、岩体质量分级规范，以岩体结构量化指标作为风化分带和质量分级的主要指标，划分两岸坝肩岩体风化分带、岩体质量分级，划分结果与野外现场判定及地质师室内划分结果相符合；利用边坡图片解译结果完成了坝肩岩体抗滑稳定边界条件分析，及不稳定块体的量化值和三维展示图，为坝肩工程地质条件评价提供重要资料。

Aspectual Interface Hypothesis takes only the internal arguments as the participants to represent the aspectual structure which is regarded as a subpart of the event structure.

体界面假设认为体结构是事件结构的一个子结构，只有内论元参与体结构表达。体结构中体角色网格成员包括两个核心体角色和，外加一个辅助体角色。

When the molar fraction of SnO2 is 83%, the main component of the coating isO2 solid solution with rutile structure. When the molar fraction of SnO2 is 44%, the main components of coating are theO2 solid solution with rutile structure andO2 solid solution with fluorite structure. When the molar fraction of SnO2 is 17%, the main component of the coating isO2 solid solution with fluorite structure. Annealed at higher temperature than 450 ℃, CeO2 is found in the coating containing 83%Sn, and there is not SnO2 in the coating containing 83%Ce, which suggests that fluoriteO2 has higher thermal stability than rutileO2. When the molar fraction of SnO2 increases, the dispensability of the coatings is improved greatly.

结果表明：通过控制制备条件可获得具有纳米结构的钛阳极涂层；当Sn的摩尔分数为83%时，涂层主要为金红石相的O2固溶体；当Sn的摩尔分数为44%时，涂层中金红石相O2固溶体和萤石结构的O2固溶体共存；当Sn的摩尔分数为17%时，涂层由萤石结构的O2固溶体组成；高于450 ℃退火时，含83%Sn的涂层中出现CeO2相，而在含83%Ce的涂层中没有出现SnO2相，表明在相同的溶质浓度下，萤石结构的O2固溶体比锡基金红石相O2固溶体具有更好的热稳定性；而涂层中的SnO2具有明显改善涂层分散性的作用。

Based on the time history analysis performed on three kinds of high-rise block masonry structures (10-story, 15-story, 18-story structures respectively) and the study on the inertia force distribution of the structures, a new pattern of lateral force distribution, namely parabolic distribution pattern, is presented here.

对3种不同中高层砌块砌体结构(分别为10层、15层和18层砌块砌体结构)进行大量时程分析，对结构的惯性力分布进行研究，提出一种新的适用于中高层砌块砌体结构Pushover分析的侧向力分布模式-抛物线型分布模式，并用该模式分别对3种砌块砌体结构进行Pushover分析。

In the investigation of Cu-Zn-Al SMA, the influence of quenching speed, shape memory thermal treatment on SME, microstructure and morphologies was discussed. The changes in morphology and interfaces were in situ metallographic observed during thermal cyclings in order to control the degradation of two way shape memory effect . The stabilization of stress induced martensite variants method and the accordingly changes in microstructure were studied in detail. The mechanism was also compared between SSIM and TWME training method. From the above in situ observation results, the interface structure and especially the twin related A: B type variant pair were examined by HREM to clarify the role of movability of interfaces and the changes in variants orientation in inducing the degradation of the TWME. During developing the Ni-Ti-Hf SMA melt spinning ribbon, it was found the morphology and structure embodied the SME and was directly effected by chemical composition and technique factors, such as the different content of Hf, the speed of copper roller rotation and etc. Therefore, the morphology and structure were extensively examined.

在对Cu-Zn-Al形状记忆合金研究中，研究了提高记忆效应的热处理淬火速度、记忆热处理方式对Cu-Zn-Al形状记忆合金组织结构的影响；为了弄清双程记忆效应衰减的原因，原位动态观察了热循环过程中，合金组织形貌及界面的变化；因形状记忆合金必须经记忆训练才能具有双程记忆效应，系统地研究了应力诱发马氏体稳定化训练方法和这种方法引起的双程记忆合金组织结构的变化，比较了它与双程记忆效应训练方法诱发TWME机制的异同；因在原位动态观察中发现界面可动性及两侧变体取向的变化，伴随着记忆效应的衰减，用HREM详细研究了变体的界面结构，特别是A：B型变体界面结构及变体内部结构。

At each penton, a hole (φ=20〓) can be seen connecting the inside and the outside of the capsid, and there is a hole (φ=12〓) at each hexton and the center of 2-fold axis, so there are 132 holes in total at the surface of CSBV.

应用冷冻电镜技术和计算机三维结构重构的方法，我们测定了CSBV核衣壳的三维结构，分辩率为25 〓，病毒的核衣壳是按T=1（P=3）的对称结构排列二十面体，病毒表面比较光滑，有12个五邻体、60个六邻体的结构，每个五邻体的中央有孔洞，六邻体的中央也有孔洞，另外在2次轴的位置上也有孔洞，这样病毒共有132个孔洞，五邻体的孔洞的直径为20 〓，而六邻体和二次轴的孔洞的直径月为12 〓。

Specifically, itcontains 8 chapters.In chapter 1, the formation, structures, properties and the futureprospect of liposome were thoroughly reviewed;In chapter 2, the stibility and permeability of phopholipid -eleostericacid liposome were studied together with the effect of polymerizationof eleostearic acid. This membrane system was very sensitive to 〓,the effect of 〓 was clarified to increase the aggregation/fusion ofliposomes and made the permeability of mixed liposomes much higher;In chapter 3, two polymerizable conjugated diyne bolaamphiphiles were synthesized. They could form very stable mixed liposome, andthe diyne could be polymerized by UV light in bilayer liposomes, as aresult, the stability of mixed liposome against solvent or surfactantafter polymerization were enhanced. In chapter 4, two kinds of amphiphilic amino acids were synthesized andstable liposomes were formed therefrom After the condensationpolymerization of amino acid in bilayer liposomes, stable polypeptide liposomes were obtained, which had lower phase transition temperatureand higher permeability.In chapter 5, four kinds of glycolipids were synthesized and theiraggregation behavior in water was comparied. When incorporated intophospholipid bilayer membranes, they could increase the phase transitiontemperatures and inhibit the aggregation and fusion of mixedliposomesat lower temperature.In chapter 6 and 7, three kinds of steroidal bolaamphiphiles withdifferent chain lengths were synthesized. Incorporation of steroidalmoiety to the center of lipid bilayer membrane obviously increased themobility of lipid membrane and shifted Tc to lower temperature side incomparasion with cholesterol. The bolaamphiphile which was shorter thanthe hosted lipid bilayer membrane thickness influenced the lipid packingmore obviously.

全文共分8章：第一章对脂质体的形成、结构、性质及展望进行了较为详细的文献综述；第二章研究了磷脂-桐酸脂质体的稳定性，通透能力及桐酸的聚合对这些性质的影响；磷脂-桐酸混合脂质体为一类对〓灵敏的脂质体，〓的作用首先是使脂质体集聚然后使脂质体融合，并加速内包荧光物的释放；第三章通过合成两种可聚合共轭双炔双极性双亲分子DDCA，DDOL，研究了共双炔分子在双分子层脂质体膜上的聚合及对脂质体性质的影响，聚合可以提高脂质体相对于溶剂及表面活性剂的稳定性；第四章合成了两类氨基酸为极性基团的双亲分子，它们均可以在超声下形成稳定的脂质体结构；氨基酸基团可以在脂质体上进行缩聚反应，若聚合后脂质体表面仍有足够的亲水能力，则可得到稳定的多肽型脂质体；聚合后脂质体的相变温度降低，通透能力增加；第五章合成了四种亲水基团为单糖基的双亲分子GL-l，GL-2，GL-3， GL-4，研究了它们在水中的分散情况、集合体形态与分子结构的关系；在DMPC双分子层膜中加入糖脂分子可以使脂质体的相变温度提高，阻止脂质体在低温放置时的集聚与融合；第六章-第七章合成了三种不同碳链长度的双极性含胆甾环双亲分子 CL-1，CL-2，CL-3；它们可以象胆固醇一样与磷脂混合形成稳定脂质体，胆甾环基团位于脂质体双分子层膜的中间；与胆固醇的作用相反，它们可以增加磷脂双分子层膜的流动性，降低混合脂质体的相变温度；三种分子的作用与其碳链长度和磷脂双分子层膜的厚度有关，比膜厚度短的分子影响最大。

After reviewing the main design idea of single agent architecture, such as the agent architecture in PTS domain and several typical interactive agent architecture, we defined the model of Multi-Agent System Based on Co-Evolution, and made a deep analysis of the components of MASBCE and the interactions among them. By the means of analysis for the layered design method of co-evolutionary agent architecture, the interaction process of the agent and the world model, the cycling process at deferent level of MASBCE, the periodic step mechanism of MASBCE, etc., we radicated the architecture of MASBCE and its inner operation mechanism.

在考察了各种典型的智能体体系结构及PTS领域的智能体体系结构等单个智能体体系结构主要设计思想的基础上，定义了基于协进化的多智能体系统MASBCE，对MASBCE的构成及其相互之间的联系进行了深入分析，通过对协进化智能体体系结构的分层设计方法、智能体与世界模型的交互过程、MASBCE中的分级循环过程、MASBCE中的周期步进运行机制等的分析，明确了MASBCE的体系结构及内部的运作机制。

Its rule of change was obtained. On the basis of other studies, the flocculation kinetics and flocs structure was studied. By making some assumptions, collision frequency were presented. Then the the flocculation kinetics model was established through population balance equation. Comparison of experimental data and modeling results indicate that there are the same trend between the two. So the model can predict flocs number and size during flocculation of Yellow River's loess particles without using empirical parameters. The TEM and SEM were used to obsever flocs in the study of floc structure. The flocculation was divided as flocculi, floc and floc aggregate. The flocs structure model was established by assumption that particles position in floc accords with tetrahedron. The fractal dimension of model and experimental flocs was found to be coincident. So the model can reflect the structure of flocs formed in flocculation of Yellow River's loess particles by macromolecule flocculant at a certain extent.

最后，本文还对絮凝动力学和絮体结构进行了研究，在前人研究的基础上，针对高分子絮凝黄河泥沙，对絮凝过程作了一些符合试验条件的假设，建立了颗粒碰撞频率表达式，应用了颗粒数量平衡方程，从而建立了絮凝过程的动力学生长模型，模型计算结果与试验数据对比表明，二者趋势一致，在没有使用经验参数的情况下基本上能够描述黄河泥沙絮凝过程中絮体数量和尺寸分布的变化过程；对絮体结构的研究中，应用扫描电子显微镜和透射电子显微镜对絮体进行了观察，将絮体分为絮粒、絮团和絮网三个不同的生长阶段，通过假设颗粒结合位置符合正四面体，建立了絮体结构模型，计算得到的模型絮体分形维数基本与试验中的实际絮体相符，在一定程度上能眵反映高分子絮凝黄河泥沙生成的絮体结构。

Its rule of change was obtained.On the basis of other studies,the flocculation kinetics and floes structure was studied. By making some assumptions, collision frequency were presented.Then the the flocculation kinetics model was established through population balance equation. Comparison of experimental data and modeling results indicate that there are the same trend between the two. So the model can predict floes number and size during flocculation of Yellow River's loess particles without using empirical parameters.The TEM and SEM were used to obsever floes in the study of floe structure.The flocculation was divided as flocculi,floc and floe aggregate.The floes structure model was established by assumption that particles position in floe accords with tetrahedron.The fractal dimension of model and experimental floes was found to be coincidentSo the model can reflect the structure of flocs formed in flocculation of Yellow River's loess particles by macromolecule flocculant at a certain extent

最后，本文还对絮凝动力学和絮体结构进行了研究，在前人研究的基础上，针对高分子絮凝黄河泥沙，对絮凝过程作了一些符合试验条件的假设，建立了颗粒碰撞频率表达式，应用了颗粒数量平衡方程，从而建立了絮凝过程的动力学生长模型，模型计算结果与试验数据对比表明，二者趋势一致，在没有使用经验参数的情况下基本上能够描述黄河泥沙絮凝过程中絮体数量和尺寸分布的变化过程；对絮体结构的研究中，应用扫描电子显微镜和透射电子显微镜对絮体进行了观察，将絮体分为絮粒、絮团和絮网三个不同的生长阶段，通过假设颗粒结合位置符西安建筑科技大学博士学位论文合正四面体，建立了絮体结构模型，计算得到的模型絮体分形维数基本与试验中的实际絮体相符，在一定程度上能够反映高分子絮凝黄河泥沙生成的絮体结构。

The objective is to subjugate and discourage the people, because that allows the elite to continue to rule unopposed.

其目的是压制和打击人民的积极性，因为这可以让实权派继续统治不会沦为反对派。

GOD,this is the second time you vanquished me!

天啊，这是第二次你打败了我！