结构体

The results show that the microstructure of ventra1 scale for python was composed of micro-convex and plank structure that was periodically arranged, it was mensurable and could be described by 9 characteristic parameters. Its surface was different in their forward and backward lean angle. The frictional coefficient of the ventra1 scale had closely relationship with moving direction, it decreased with the increasing load. The value of the frictional coefficient was about 0.07. The frictional coefficient while python moved backward and laterally were equal, and that was 33% more than that moved ahead. The frictional force of the ventra1 scale surface was caused by mechanical tooth function of micro-convex, acting intermolecular force and material's elastic hysteresis. The difference of forward and behind bevel for micro-convex was the anisotropy reason of frictional force.

结果表明：腹鳞表面的微观结构由指状微突体和板结构部分周期排列而成，其结构可用9个特征参数定量描述；腹鳞表面摩擦力由分子作用力、表面微突体的犁沟力、楔形作用力以及材料弹性滞后共同引起；腹鳞表面的摩擦系数在0.07左右并与运动方向有关，摩擦系数随载荷增加而减小；后向运动及左、右侧向运动时摩擦系数基本相等，比前向运动时高33%左右；腹鳞表面微突体不同方向上倾斜角度的差异是引起摩擦各向异性的主要原因。

Dongying wild soybean seedlings had the highest activities of antioxidant enzymes and higher Na+ transport efficiency under the short-term NaCl stress, which helped to alleviate the damage of the short-term NaCl stress.(4) The shape of chloroplasts was changed to circular from oval, and the granum stacks twisted under the short-term NaCl stress in the Shandong cultivar soybean leaves whereas, only twisted granum stacks were observed in the Dongbei wild soybean leaves.

4NaCl短期胁迫后山东栽培大豆幼苗叶片的叶绿体形状发生变化，由椭圆形变成了圆形，类囊体结构部分膨胀扭曲；东北野生大豆幼苗叶片的叶绿体形状没有多大变化，但是类囊体结构部分膨胀扭曲；而东营野生大豆幼苗叶片的叶绿体形状和类囊体结构都几乎没有变化。

The invention discloses a method to integrate single CMOS with bulk silicon microelectromechanical system, its technical project: 1 forming isolating groove: adopting deep-groove etching, and SiO2 and polycrystal silicon filling to realize the insulation of MEMS structure and CMOS circuit; 2 making standard CMOS circuit; 3 using SiO2 and Si3N4 as mask, etching silicon on the back until exposing SiO2 at the bottom of the isolating groove, to complete the thickness control for MEMS silicon structure layer; 4 completing metalizing the CMOS circuit and masking the MEMS structure: MEMS structure region uses Al as mask and CMOS circuit region uses thick photoetching glue as mask, using DRIE to release silicon structure.

本发明公开了一种将单片CMOS与体硅微机械系统集成的方法，其技术方案为：1形成隔离槽：采用深槽刻蚀，SiO 2 和多晶硅填充，实现MEMS结构和CMOS电路的绝缘；2完成隔离槽后进行标准CMOS电路的加工；3用SiO 2 和Si 3 N 4 作掩膜，从背面腐蚀硅，直至暴露出隔离槽底部的SiO 2 ，完成MEMS硅结构层的厚度控制；4完成CMOS电路金属化和MEMS结构掩膜：MEMS结构区用铝作掩膜，CMOS电路区用厚光刻胶作掩膜，用DRIE释放硅结构。用本发明方法不仅获得了较大的质量块，而且用本发明较高的深宽比制作出的结构电容，同时实现了体硅微机械与CMOS电路的集成，显著提高MEMS传感器的精度和稳定性，具有前沿性和重要实用价值。

An interbedded sliding zone with fault-slip cleavage in an amygdaloidal basalt thin layer made up the embryo of the main sliding zone and the coupling chemical weathering with physical weathering based on lateral unloading made the interbedded sliding zone get a material prone to slide finally.

褶皱运动产生的构造裂隙与柱状节理的叠加使滑体玄武岩呈现碎裂—镶嵌结构，而沿结构面发生的化学风化形成的腐岩壳使岩体进一步转变为&石夹土&结构，加剧了坡体的时效变形。

Since inextensible reinforcements do not stretch under design loading, they are the preferred MSE reinforcement type for highway structures in general and for critical structures such as bridge abutments in particular, where deformation control is crucial to structural performance of both the superstructure and the abutment.5 Inextensible reinforcements have been used successfully in MSE bridge abutment structures for thirty-five years, while research is still underway trying to develop an extensible

由于不可拉伸的加筋体在设计承载下不能拉伸变形，因此它们一般是公路结构，尤其是桥肩等重要结构中的首选材料，因为在这些结构中，变形控制对上层建筑和桥肩中性能表现是很关键的因素。不可拉伸加筋体在加筋土桥肩结构中已经成功的使用了35年，与此同时，研究能够在桥肩应用中性能有保证的可拉伸加筋体的工作正在进行中。

During the non-isothermal crystallization, compared with common PE, the cooling rate had less impact on the crystallization rate of mPE. Second, the sensitivity of the melt viscosity of mPE to the shear rate was poor, and the introduction of long chain branches onto the molecular structure of mPE could improve the dependence of their melt viscosity on both shear rate and temperature. In the extensional rheometric tests, the occurrence of phenomena of'strain hardening' relied on the structure of linear long chains, and mPE didn't show the behavior of'strain hardening', which implied that the melt strength ofmPE was poor.

其中通过共聚方法在mPE分子中引入非线性长支链结构，对提高mPE熔体粘度对温度的依赖性作用较为明显，而对提高mPE熔体粘度对剪切速率的依赖性以及对提高mPE熔体强度作用较弱；采用共混方法在mPE体系中引入线性长支链结构，则对提高mPE熔体粘度对剪切速率的依赖性以及提高mPE的熔体强度的作用较为明显，而对于提高mPE熔体粘度对温度的依赖性作用相对较弱。

In this project, the selection criteria of matrix and reinforcement for obtaining composites with high strength and toughness are determined. The as-cast and aged microstructures of composites reinforced with particles of different strength are observed, and their metallurgical conditions and stabilization mechanisms are analyzed. The aging precipitation behaviors and mechanisms are studied. Some characteristics of nano-materials (micro-distortion areas) are found in 150nm- Al2O3p/Al composites and their formation mechanisms are expatiated. The "flexible" restriction to the deformation of the matrix by low strength AlN particle is observed by in-situ TEM and SEM techniques, and the mechanisms of its resist on cracks propagation and its contribution to composite strength are revealed. The high temperature deformation behaviors of Al2O3p/Al composites are studied. A rare-earth coating is established on sub-micron Al2O3 particles, leading to an improvement in wettability between coated Al2O3 and liquid aluminum and a decrease in infiltration pressure. The strength and ductility of coated particles reinforced composite are also increased. The interfacial characteristics, bonding structures and their formation mechanisms are studied, and the crystal orientation relationships between reinforcement particles and aluminum matrix are investigated. Finally a lighter composite with better balance of strength and damping properties is reinforced with hollow ceramic microballoons of ultra-lower strength.

本项目发现了获得高强度和高韧性复合材料的基体、增强体选择依据；观察了各种强度质点增强复合材料的铸态和时效态微观组织，分析其微观结构形成的金属学条件及稳定性机理，研究了其时效析出规律和时效机制，发现了150nmAl2O3颗粒增强铝基复合材料基体中的纳米材料特征，并解释了其形成机理；利用TEM和SEM动态拉伸技术发现了低强度质点AlN颗粒对变形协调的&柔性强化&机制，揭示了其对裂纹扩展的阻碍作用和对复合材料高强度的贡献；研究了中强度质点的Al2O3颗粒增强铝基复合材料的高温变形行为，并对其进行了稀土界面层设计与制备，改善了颗粒与铝合金之间的界面润湿性，降低了复合材料铸造渗透压力，提高了复合材料的强、韧性；研究了多种复合材料界面结构及形成机理，确定了增强体与基体之间的界面结合机制，分析了复合材料界面处的晶体学位向关系；最后制备了含微孔的中空型陶瓷颗粒增强的特种复合材料，得到了强度和阻尼综合性能较好的轻质复合材料。

The incline and base structure, carton ring and mainframework, second grade structure and fag end, cooperating structure of metalloprotein,crystal structure of collagen peptide, hydration structure and multi-gather structurewere studied accordingly.

直观地观察了氨基酸的倾向结构和底部结构、卡通环和主骨架、二级结构和末端、金属化合物的配体结构、胶原肽的晶体结构、水合结构以及多聚体结构等。

The new calculation method of structural surfaces with different scales is given on the basis of block discrete element method in which contacts face to face. Moreover, a new discrete element model for simulating rock and soil blasting problem is built. The elements of new model can be split by itself in the program. There are small scale blocks around the charge, and large scale blocks are adopted in far zone.

在块体离散元面－面接触的基础上，给出不同尺度结构面的计算方法，建立离散元对岩土爆破模拟的计算模型，实现块体白分裂计算程序，在药包附近采用小尺度块体，远区采用大尺度块体，可以更为准确地描述爆破载荷下岩体结构面的尺寸效应。

In the process of building and using the mass concrete structures, because of the effect of out-side condition and themselves, some faults will form in the structure, these faults will effect the bearing capability and endurance Using nondestructive testing method to test the concrete"s quality and diagnose its healthy, which has the significant sense in assessing the safety stability and research of the administering diseasesThis dissertation mostly researched the testing methods in the mass concrete structure, discussed the principles, methods, features, sphere of application of the ultrasonic testing in the mass concrete structure with faults, used dynamic FEM to simulate the testing process, discussed when the concrete structure with cracks is under the effect of the pulse, how the elastic waves propagate and what are their changing feature, Researched the principles of the first-arriving waves" phase when the cracks" depths are not same, obtained the relation between the inversion point and the cracks" depth, which has the direction sense in the application of projects,The second part of this dissertation is CT , which used the ultrasonic wave running through the tested-substance to get arriving-time of the ultrasonic wave, then inverse the image This dissertation drawed one CT program which can well present the different little cells ultrasonic wave velocity profiles of the substance, thereby to diagnose the quality of the part of the tested-substance, CT has the better using foreground..

在混凝土结构的施工及使用过程中，由于受其自身及外界各种因素的影响，常常会产生一些缺陷，对结构物的承载能力和耐久性造成严重影响，采用无损检测技术进行质量检测和健康诊断，这对混凝土结构开展安全、稳定性评估以及病害隐患治理研究具有重要意义。本论文主要针对大体积混凝土结构缺陷的检测方法展开研究工作，重点讨论了超声波法检测混凝土结构裂缝的基本原理和方法及其特点、适用范围，运用动力有限元数值模拟其检测过程，探讨了有裂缝缺陷的混凝土结构在脉冲荷载作用下弹性波的传播及其变化特征，研究了不同裂缝深度下首波相位变化规律，得出了反转临界点与裂缝深度之间的关系，这对实际工程应用具有指导意义。声波CT是一种新的无损检测技术，它是利用声波穿透被检测体获取声波接收时间，来进行计算机反演成像的技术。本文利用直射线法编制了层析成像程序，能较好地呈现被检测物体各微小单元的声波速度分布图像，从而对检测体的质量状况作出诊断评估，具有较好的应用发展前景。

As she looked at Warrington's manly face, and dark, melancholy eyes, she had settled in her mind that he must have been the victim of an unhappy attachment.

每逢看到沃林顿那刚毅的脸，那乌黑、忧郁的眼睛，她便会相信，他一定作过不幸的爱情的受害者。

Maybe they'll disappear into a pothole.

也许他们将在壶穴里消失