结构上

Five novel torsion-mirror optical actuators including double-beam thickness differential structure with single torsional axis, double flexible folded-beam structure with single torsional axis, double-beam vertical torsion comb structure with single torsion axis, four-beam differential compound-micromirror structure with double torsional axis and the combined structure of the four basis forms above, are brought forward. All of these devices could be fabricated by the same silicon micromachining process we have developed. The deformation compensation design with local enhancement for the thin torsional beam which is the key structure of these devices is also put forward to improve the reliability. The three-dimension solid model and two-dimension reduced order model of the torsion-mirror optical actuator are established and then the numerical simulations for evaluating the device characteristics of the statics, dynamics, electrostatic field, mechanical and electrostatic coupling, fluid and solid coupling are carried out to optimize the structure design. Furthermore, three optical fibre clamping structures which could be integrated monolithicly are designed and analyzed to improve the optical coupling capability. 4. Three flexible process flows combined with bulk silicon micromachining and surface silicon micromachining are brought forward to fabricate these novel single-crystal silicon or polysilicon torsion-mirror optical actuators by using the same lithography masks for both SOI wafer and regular silicon wafer. A series of important process experiments are carried out to optimize the process parameters and the process flows. Some novel and typical process phenomena which occurred during the microfabrication are analyzed and then the corresponding solutions are put forward. 5. A MEMS dynamic testing system which exploit blur image synthetic technique, stroboscopic image matching technique, stroboscopic mirau microscopic interferometry technique and microscopic laser dopper vibrometer technique is set up to measure three-dimension and six-freedom micro motions of any MEMS devices with nanometer resolution.

在对硅微机械扭转镜光致动器的光机电特性系统地理论研究的基础上提出了硅微机械扭转镜光致动器的结构设计准则。3、提出了单轴双梁厚度差分结构、单轴双柔性折叠梁结构、单轴双梁垂直扭转梳齿结构、双轴四梁差动复合微镜结构以及以上四种基本结构组合后的衍生结构等五种工艺加工技术兼容的新型的硅微机械扭转镜光致动器，对器件关键结构薄厚度、高耐疲劳扭转梁进行了局部加强的变形补偿设计，建立了器件的三维实体模型以及两维降阶模型，对提出的新结构硅微机械扭转镜光致动器进行了系统的静力学、动力学、静电场、力电耦合和流体固体耦合的建模仿真与优化设计，同时设计并分析了三种可实现单芯片集成的弹性光纤定位夹紧结构。4、提出了组合体硅微加工技术与表面硅微加工技术、兼容同一套光刻版图、可分别基于SOI 晶片和普通Si 晶片、适应于制造提出的各种新结构单晶硅和多晶硅硅微机械扭转镜光致动器的三套柔性加工工艺流程，开展了一系列重要工艺步骤的单项工艺试验，对工艺流程与工艺参数进行了优化，针对加工过程中出现的具有普遍意义的典型工艺问题进行了讨论和分析，并提出了解决方法。5、创新性地将模糊图像合成技术、频闪图像匹配技术、频闪Mirau 显微干涉技术与显微激光多普勒测振技术有机结合，建立起了一套周期运动测量与瞬态运动测量相结合、单点运动测量与全视场运动测量相结合、满足不同MEMS 器件各种动态测试要求的集成的MEMS 三维六自由度微运动精密测量系统。

The raw data was processed by using axial, coronal and double oblique multi-planar reformation; Images obtained were graded in terms of quality with a 5-point scale(5=excellent, 4=good, 3=fair, 2=poor, and 1=nondiagnostic). In grading image quality at axial MPR, The radiologic specialists focused on the subarcuate fossa, tendon of tensor tympani, facial recess, vestibular aqueduct and pyramidal eminence, In grading image quality at coronal MPR, attention was given to the scute, crista transversa, fenestra cochleae, lateral malleal ligament and snake eyes signature of cranial nerve, In the grading of the image quality at double oblique MPR, the radiologic specialists concentrated on the malleus, incus, stirrup bone, upper bony semicircular and aquaeductus fallopii, and then to implement statistical analysis. In order to choose the minimum tube current values and the maximum pitch that can satisfy the diagnosis request, image quality of axial, coronal and double oblique reformation images was compared with different tube current groups. 15 ears of volunteers were used to test the validity with the scanning parameter. Subsequently noise, MTF and dose length product were measured by phantoms in different tube current and pitch, the parameters obtained were compared and taken into statistics analysis.

扫描模式使用临床常用的颞骨螺旋扫描方式：管电压120 kV，准直宽度20×0.6 mm，视野200 mm，重建矩阵512×512，旋转时间1 s/r，重建层厚0.6 mm，重建间隔0.3 mm，分别改变管电流(380、300、200、160、120和80 mA)和螺距(0.8、1.0和1.2)进行扫描和重建，然后对颞骨进行横断面、冠状面和双斜面多平面重组，于重组后的横断层面图像上选取弓形下窝、鼓膜张肌腱、面神经隐窝、前庭导水管和锥隆起5个解剖结构，冠状面重组图像上选取盾板、横嵴、蜗窗、面神经的蛇眼征和锤骨外侧韧带5个解剖结构，双斜面重组图像上选取锤骨、砧骨、镫骨、上骨半规管和面神经管5个解剖结构，在双盲的情况下由放射学专家分别对各管电流和螺距下扫描的重组图像进行评分，随后进行统计学处理，从中筛选出满足诊断要求的最低管电流值和最大的螺距，分别采用患者25例(15耳)用该管电流值和螺距验证其可行性；然后利用模体分别测试各管电流和螺距下的图像的空间分辨率、噪声及其剂量长度积，并对测试所得参数数值进行比较和统计学处理。

Perspective of the thesis is from the social development and enterprise progress, to enhance competitive advantage of technological enterprises as the goal, describe the necessary to resolve the issue of the organizational structure by a comparative analysis, as well as in practice, optimization of the organizational structure has practical significance, the thesis is on the basis of optimization analysis of organizational structure of Shenzhen MG technology company, and uses the four-cycle perspective to describe the cyclical dynamic reconfiguration of the organization optimization problem, through the planning, startup, diagnosis, design, reconstruction, monitoring , as well as steps to improve the optimization of organizational structure, provide a new way of thinking and problem-solving approach to improve the efficiency of organization for similarity technology enterprises.

本文从社会发展、企业进步的视角出发，以提升科技企业竞争优势为目标，阐述了解决企业组织结构问题在理论上的必要性，以及组织结构优化在实践中所具有的现实意义。本文在对深圳MG科技公司组织结构现状进行分析的基础上，采用四循环法这种以周期性的观点描述企业动态组织优化问题的方法，通过策划、启动、诊断、设计、重构、监控、以及改进等步骤逐步实现对深圳MG科技公司的组织结构优化，所得的研究成果为类似科技企业进行组织结构优化提供了新的解决思路和方案。

The information integrated pattern based on PDM/PLM in the course ofmanufacture is put forward. Under the constraints of building CAPP platform, thearchitecture of CAPP platform is established. The models of decision making andfunction for process planning are given. Then the development means of CAPP basedSmarTeam are extracted.3. The structure of modular product life cycle is established. Toward the divisionand planning of the General Modules oriented product family, theCAD/CAPP integrated model of flexible module based on feature and CAD/CAPPmapping model based on process planning match board are set up. The keytechnologies of Solidworks/SmarTeam/CAPP integration are studies.4. From the point of view of process match board and step match board, theprocess of creating to process planning match board is studied. As an example, themachining process planning of up beam of hydraulic press machines is used tointroduce the establishment of process planning match board by means of inferencebased on expert knowledge. The organize model about the process planning matchboard oriented product family is brought forward.5. The multi-decision methods of CAPP system based on analytic hierarchy aregiven.. On the basis of uniform data model, the sub-machining process planning ofpart is auto-created by means of analytic hierarchy, The step decision methods basedon AHP is put forward.6. For the design/manufacture information in the course of product life cycle, thetree structure based on Object-Oriented and static model based UML are founded. Themethod of establishing design/manufacture information management system isbrought forward. The commercial PLM software—SmarTeam is regarded asdevelopment platform, on basis of which, the design/manufacture informationmanagement system is built, and the multi-view mapping technique ofdesign/manufacture information model is studies.7. A computer-aided CAPP platform based on PDM/PLM is founded, and itsstructure, function, work flow is illustrated. Some example of the system areintroduced.

阐述课题提出的目的和意义，明确了本文研究的主要内容。2、提出基于PDM/PLM的制造过程信息化集成模式；在平台式CAPP系统的设计约束模型基础上，构建了平台式CAPP系统的体系结构；并给出工艺决策模型和功能模型；最后提出基于SmarTeam的CAPP开发模式和实现策略。3、建立模块化产品生命周期模型的组织结构；针对面向产品族的广义模块的划分和规划方法，建立基于特征的柔性模块CAD/CAPP集成模型及基于工艺模板的CAD/CAPP映射模型；研究Solidworks/SmarTeam/CAPP集成的关键技术。4、从工序模板和工步模板的角度研究了工艺模板的创建过程；以液压机上梁模块机加工为例，采用基于专家知识的推理技术实现了工艺模板的创成；提出了面向产品族的工艺模板分层结构树的组织模式。5、提出基于分层规划的多模式工艺决策流程；在统一数据模型的基础上，从特征层和零件层分层规划，实现了零件加工子工艺的自动创成；提出基于AHP的工步排序决策方法。6、针对产品生命周期中的设计/制造信息，建立了面向对象的类树结构和基于UML的静态结构模型；提出基于PDM/PLM软件的设计/制造信息管理系统的构建方法；以商品化PLM软件SmarTeam作为开发平台，开发了基于SmarTeam的设计/制造信息管理原型系统；研究设计/制造信息模型多视图映射机制。7、开发了基于PDM/PLM的平台式CAPP原型系统，构建了系统的功能模型，并对系统的主要功能进行说明，给出系统的运行实例。

In the frame, Design Structure Matrix is the tool to build up the models of product structure and development process. The product structure topology tree is defined, and the product structure DSM model is introduced. The formalized description about development process model is presented. The characteristics of the tools to build up development process are analyzed, the strongpoint of DSM is discussed, and the development process model based on DSM is introduced. The relation between product structure and development process is analyzed.

在研究框架中引入了产品结构和开发过程的建模工具——设计结构矩阵(Design Structure Matrix， DSM)；给出了产品结构拓朴树的定义及其形式化描述，并在此基础上引入了产品结构DSM模型；给出了产品开发过程模型的形式化描述，比较了几种常见的产品开发过程建模工具，分析了用DSM建模工具进行产品开发过程建模的优势，引入了产品开发过程DSM模型；分析了产品结构与开发过程之间的联系，提出了两者之间的集成机制，并在此基础上给出了IM-PSDP模型。

On the basis of analyzing the principles of interleaver filters of the interference of polarized light and planar lightwave circuit-type lattice structure, the equivalent mathematical representation of the spectral transmittance of the two kinds of interlearers is revealed. The equivalent relationships of the structural parameters of them are given.

在分析比较双折射晶体偏振光干涉型和平面波导环形格子结构型光交错复用滤波器原理的基础上，揭示了两者在光谱透射率的数学上的等效性，给出了两者结构参量之间的等效关系，可以直接利用经简单傅里叶级数对比法获得的晶体的结构参量对平面波导环形格子结构型光交错复用滤波器进行结构设计。

From the function needing of the building, the top needs small axis dimension which has to be assigned, the next function part hopes that there is as big as possible free space, it is heavy for network to take post, for satisfying building the requests of function, the structure must be by fixing up contrary to routine way, in order to realize that this kind fixes up, must set up a special floor between the underpart in structure forms are different, make it bear top the internal force of structure and transmit and give underpart structure to play structure change the floors of function reliable. It is called transfer floor.

从建筑功能的要求上讲，上部需要小开间的轴线布置，下部公用部分则希望有尽可能大的自由灵活空间，柱网要大，为了满足建筑功能的要求，结构必须以与常规方式相反进行布置，为了实现这种布置，就必须在结构形式不同的上下部之间设置一个特殊的楼层，使其能承受上部结构的各种内力，并将其可靠的传递给下部结构，这一能起结构转换作用的楼层，称为转换层。

The author considers that the form of the instrumental music structure came from special opera shape in Shangdang area and its act with five tune-patterns together in the same platform, it is also due to the Shangdang phonic criterion in Yongzheng government of Qing dynasty, which objectively shaped its system and scale, and meanwhile accelerate its growth and creativity. Shangdang instrumental music absorbed broadly t...更多he instrumental music on experience of Kun opera, Luo opera, Juan opera and Huang opera on basis of instrumental music on the local tune, which contains with diversity, and generally became of the art matrix of Shangdang folk music and opera melody.

本文认为：上党梆子器乐结构的形成，主要来自上党地区独特的戏曲生态和五种声腔同台共演的历史经验；特别是清代雍正年间国家政策对上党八音的规范，客观上引发了上党梆子器乐在体制和规模上的定型，也促进了上党梆子器乐在此基础上不断发展、创新；上党梆子器乐是在梆子腔器乐结构基础上，广泛吸收了昆腔、罗腔、卷腔、簧腔在器乐结构中的经验，由此兼容并包，逐渐成为集上党民间音乐和戏曲音乐大成的音乐艺术母体。

The proper way is to activate the impulse of industry structure with technology innovation, and to improve the inscape of micro-economy as well as to extend the boundary condition

本文通过对国内外关于技术创新与产业结构相关理论解析的基础上，揭示了技术创新与产业结构的内在有机联系，分析了技术创新与产业结构之间的互动关系；通过分析我国技术创新与产业结构的现状，指出了当前我国技术创新与产业结构存在问题的原因，并通过分析世界上主要几种技术创新模式的优缺点，提出了当前及未来阶段我国应采取的技术创新模式-以模仿创新为过渡，最终实现自主创新。

The activation energy of B ring elementary reaction is between 16～20kJ/mol.

从IRC结果以及对过渡态结构的电子密度拓扑学分析结果可以确定，羟基自由基在反应过程之中抽取了黄酮类化合物A环上未参与分子内氢键结构的酚羟基上的氢原子形成水分子及稳定性更高的半醌式大环自由基，在整个过程之中羟基自由基从反应物一侧进攻并逐渐发生扭转，直至形成一个进平面结构的过渡态结构，这与上一章关于黄酮类化合物B环的研究结果基本一致。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。