结晶玻璃

The result indicates that the base glass without composite nucleating agent experiences no devitrification in the heat treatment process.

研究表明，晶核剂可以诱导非均匀成核，未加晶核剂的基础玻璃虽然经热处理过程，但仍无结晶相析出。

In order to increase the strength and load capability of poly L-lactide for fracture innerfixation,the composite materials of PLLA and β- calcium metaphosphate whisker with the aspect ratio of 30～50 prepared by crystallizing in the glass were obtained.

为了提高骨折内固定材料聚乳酸的力学强度及承载能力，通过玻璃结晶化方法制备得到长径比为30~50的偏磷酸钙晶须，将CMPw与左旋聚乳酸复合，制得抗压强度为80MPa，抗弯强度为40MPa，断裂强度达到170MPa的复合材料。

An Effective way to Promote Quality of NPG ;2. The effects of the content of the third monomer NPG on the T_g, melting behavior and heat shrinkability of PET were studied, and the effect of drawing technology on the shrinkage of the film was also studied.

运用自制的反应装置，通过加入第三单体的方法对聚对苯二甲酸二醇酯进行了共聚改性，研究了第三单体新戊二醇用量对PET玻璃化转变温度Tg、结晶熔融行为和热收缩性能的影响，同时对拉伸工艺对薄膜收缩率的影响也进行了研究。

Copolymerization modification of PET was made by means of adding a third monomer on a homemade facility. The effects of the content of the third monomer NPG on the T, melting behavior and heat shrinkability of PET were studied, and the effect of drawing technology on the shrinkage of the film was also studied.

运用自制的反应装置，通过加入第三单体的方法对聚对苯二甲酸二醇酯进行了共聚改性，研究了第三单体新戊二醇用量对PET玻璃化转变温度T、结晶熔融行为和热收缩性能的影响，同时对拉伸工艺对薄膜收缩率的影响也进行了研究。

Copolymerization modification of PET was made by means of adding a third monomer on a home-made facility. The effects of the content of the third monomer NPG on the T_g, melting behavior and heat shrinkability of PET were studied, and the effect of drawing technology on the shrinkage of the film was also studied.

运用自制的反应装置，通过加入第三单体的方法对聚对苯二甲酸二醇酯进行了共聚改性，研究了第三单体新戊二醇用量对PET玻璃化转变温度Tg、结晶熔融行为和热收缩性能的影响，同时对拉伸工艺对薄膜收缩率的影响也进行了研究。

Special silex nozzle, smooth inside, angle precise, long-term spray, without crystal.

采用独特的石英玻璃烧制成的喷嘴，内腔圆滑，角度精确，长期喷雾，无结晶。

The results show that the fibers with good dye ability can be obtained from blends containing certain amount of SIPE, which are made by using an appropriate proportion of cationic dyeable polyesters and recycled polyester.

结果表明：以适当比例和种类的CDP与PETRc共混，制得的三单体含量一定的共混纤维，能够实现阳离子染料常压染色；影响CDP/PETRc共混纤维实现常压染色的主要因素是共混纤维的结晶度和玻璃化温度。

Borax or tincal: Sodium tetraborate decahydrate Na2B4O5(OH4 H2O, a soft, light, colourless crystalline mineral used as a component of glass and pottery glaze s in the ceramics industry, as a solvent for metal-oxide slags in metallurgy, as a flux in welding and soldering, and as a fertilizer additive, a soap supplement, a disinfectant, a mouthwash, and a water softener.

硼砂：四硼酸钠Na2B4O5(OH4？H2O。它是既软又轻的无色结晶物质，有多方面用途；作为玻璃的成分，在陶瓷工业中作为陶器的釉料，冶金中作为金属氧化物炉渣的溶剂，作为焊接剂，并作为化肥的加料、肥皂的添加物，消毒剂、漱口剂和水的软化剂。

The glass transition temperature of PLLA decreased with the increase of cooling rate.

玻璃化温度和结晶度随着降温速率的降低而增大。

We used ITO glass substrate and high purity（99.99%） titanium , put to use sputtering process, add to high purity O2 make it complete the best structure film and the thickness about 1400 . By way of 500℃ anneal could got a better anatase phase, this result could easy reaction with electrolyte to increase electron-transferred. Used as spin casting covering PR on ITO substrate, transferring patterns of array circular shapes on a mask to photography, used optimize temperature and time to hard bake. Finally used HCl to etching underexposed TiO2 area, and acetone to tripper top PR, make it to accomplish pillars shape TiO2 electrode.

本研究使用ITO玻璃基板为底材在以高纯度钛(99.99%)为靶材，利用溅镀方式通入纯氧使其行成高纯度TiO2镀於ITO基板上行成厚度约1400的薄膜，且经500℃高温烧结使其行成最强的锐钛矿结晶相，此晶相有利於与电解液反应进而增加电子的转移，提升太阳能电池最佳的效率，在以旋转涂布方式铺上光阻，以矩阵排列的圆孔光罩曝光、最佳的温度及时间来烘烤、显影后；使用盐酸以等向性湿蚀刻方式蚀刻未曝光之TiO2区域，最后利用鈵铜将最上层光阻去除，使其行成柱状TiO2的电极。

Fancy gold-plated dangling earrings with facetted White Opal crystals.

花式镀金悬垂耳环与facetted白欧泊水晶。

This essay chooses the study aim from biology teachers in middle school in Shi Jiazhuang which tells us that most of the middle school biology teachers in Shi Jiazhuang have the"burnout", lower successfulness, individualize.

本文选取石家庄市初中生物教师作为研究对象，运用问卷调查的方法对石家庄市初中生物教师职业倦怠的现状进行调查，调查结果发现，石家庄市初中生物教师这一群体普遍存在职业倦怠，情感枯竭程度偏高，成就感偏低，去个性化程度最为严重。