结合面

The off-axis reflection system composed of four aspheric mirrors was designed, but the system structure was not so simple and the performance can also be improved, besides, manufacture and test for large aspheric mirrors are difficult; and then the spherical Fresnel mirror which is easier to be manufactured and tested was used to replace the aspheric mirror, the spherical Fresnel mirror has low cost of replication, but this design also can\'t be used in projection lens because it was only feasible in narrow wavebands; Furthermore, the design making use of catadioptric projection lens was accomplished, this design is greatly applied in rear projector because it has merits of both refraction and reflection. But it had difficulties in color aberration correction and had complex structure.

设计了四片非球面组成的离轴式反射系统，然而，仅采用非球面设计系统结构不够精简，性能也有待进一步提高，且非球面面形较大时加工和检测都存在一定的困难；继而提出了用球面Fresnel反射镜代替非球面的设计方法，虽然Fresnel反射镜加工和检测更为简单，且复制成本低，但对波长具有选择性；进而，应用折反系统结合的方式设计了离轴式投影镜头，该方法因兼具折射和反射的优点，在大屏幕超薄背投系统的设计中广为应用，缺点是会产生难以校正的色差，且结构复杂。

This paper describes a computer-controlled stroboscopic interferometer system for measuring out-of-plane motions of MEMS structures with nanometer resolution.

基于计算机控制的频闪干涉测试系统，文中提出了一种时间轴和空间轴双向解包裹的干涉条纹分析方法，实现了MEMS器件离面运动参数的精确测量，并与微结构平面结构图像模板相结合，可以进行MEMS器件全视场运动的分析，达到了纳米级分辨力。

The paper use the GIS methods to creating the basic spatial information database, and processing the polygon data by overlapping analyst, the linear data by network analysis, the statistic data by join analysis, the evaluate data by superaddition analysis, and these methods make the data collection, organization and analyst more easier, and the thematic map make the result more intuitionistic. Especially, through combined the graphics processing and the spatial data operation organically, the spatial overlapping analyst resolved the division from natural elements to administrative evaluate units.

应用GIS技术建立空间基础信息数据库，进行面状要素叠加分析、线状要素网络分析、统计要素链接分析和赋值要素追加分析，使分区数据的采集、组织和分析更加简单；专题地图的应用，也使分区方案的表现更为直观；尤其是GIS空间叠加分析功能通过图形处理与空间数据运算有机地结合，解决了自然分区和行政分区界限中的若干要素的切分问题。

According to the above studies, the distributing rules of root stresses and teeth compliance are investigated comparatively, and the results testifying the reliability of the model.

结合上述研究，对齿根应力与齿面变形的分布规律进行比较研究，结果表明了模型的可靠性。

In this method, FEM and BEM decrease the calculation time, and tetrahedral element method can avoid deformation element.

有限元和边界元相结合的方法大大减少了计算工作量和计算时间；模型中采用四面体单元剖分线性单元网格，很好地避免了传统方法中出现的准六面体畸形网格。

For giving an explaintion of strong transmogrification but feebleness metamorphism of and their corresponding relation of the Triassic stratum in Songpan-Ganzi area and opening out the temperature and stress condition, this paper summarized study production of predecessors, and put forward 5 conclusions about Songpan-Ganzi area Triassic main lithology(slate, sandrock,and blastopsammitic) through field geological investigation , actual measurement section plane study and combining indoor slice identification , electron probing and fluid enclosure testing analysis:1.Field outcrop strongly transmogrification, and often developed same cleavages(S1) erection or approximately erection 'B'fold and symmetry similituded fold. 2.The metamorphosed mineral combination is simple, and the typical metamorphosed mineral combination is Al+Chl+Ser+Cc+Q, etc. The metamorphosed mineral develops mainly along the cleavages of the territorial cleavages faces(S1), bearing territorial dynamic metamorphism character and belonging to the lawsonite-albite-chlorite face of slightly metamorphism. 3.Territorial metamorphism P-T change focus on T:180～200oC, P:1～2kbar

为了对松潘-甘孜地区三叠系强变形浅变质的特征及变质与变形的对应关系作出解释，揭示变质与变形的温-压条件，本论文总结前人研究成果，通过野外地质调查和实测剖面研究，结合室内薄片鉴定、电子探针和流体包裹体测试分析，对松潘-甘孜地区三叠系主体岩性(板岩、砂板岩、变质砂岩及千枚岩)的变质作用得出5 个认识结论：1、整个松潘-甘孜地区经受了自北向南的强大挤压；2、变质矿物组合简单，除雏晶黑云母外，典型的变质矿物组合为Al+Chl+Ser+Cc+Q等，变质矿物主要沿区域性劈理面(S1)的劈理域发育，具有区域动力变质作用特征，属于低级变质作用中的硬柱石-钠长石-绿泥石相；3、区域变质作用P-T 变化集中在T：180～200oC，P：1～2kbar

In addition, a vector nozzle shape design method that couples viscous flow analysis, a complex method is described in this paper.

本文首先研究了二维非结构网格的生成方法，采用Delaunay三角化与阵面推进相结合的方法。

In this thesis, the digitization, informationization, modelization and videotex of research on ecological environment security were achieved by using RS-GIS-EIS integrated technology.

论文的创新和特色在于，首次提出土地生态环境安全的概念，将生态安全研究的理论与方法引入土地生态环境安全研究中，并在这些理论和方法的指导下进行了吉林西部土地生态环境安全的研究；首次在吉林西部地区进行了土地生态环境敏感性评价，从土壤退化和土地盐碱化敏感性评价反映了吉林西部土地生态环境不安全的潜在危机；构建了土地生态环境安全评价的压力-状态-响应指标体系，该体系既体现了指标总体上的因果关系，又渗透了生态环境与经济的可持续发展；在土地生态环境安全评价过程中，本文提出用栅格点状评价单元和行政区面状评价单元结合的方法进行土地生态环境安全评价，使评价结果和分区更加精确；首次进行生态安全预警的研究。

This paper puts forward an experimental model with the first-order response surface method and the design of experiments to study the impact of factors on dynamic performance of PEMFC. These factors include clamping pressure, fuel gas pressure and flux. The model is finally validated by volt-ampere experiments.

本文通过正交实验设计，利用一阶响应面法得到各因素对电池性能影响的实验模型，综合考虑了装配压力、燃料气体压力和流量对自增湿、自呼吸型PEMFC动态性能的影响，并结合伏-安特性实验进行了验证。

The geology research of carbonate reservoirs in Ordovician of Tahe oilfield showed that many large dissolved vugs and fractures were developed. The spread of the reservoir take on a very heterogeneous state. And the typical fractured-vuggy reservoirs was formed. According to the combination of the various spaces, the formation was divided into vuggy formation, fractured-vuggy formation and fractured formation. The research showed that development of the vug is relevant to the its position on the structure, the fractures, the water surface and the weathering surface. Multi-phase charge and recharge of the oil in the reservoirs resulted in the complexity of the fluid distribution. So the"Bottle Model"was brought forward to explain the movement of the water-oil contact. The special storage space and the complex fluid distribution lead to the unstability of the production and the complexity of the water cut. In order to explain the characteristic of the fracture-vug unit was brought forward and the basic principle and method of the partition of the fracture-vug unit was formed. The classification and evaluation of the units were performed according the reserve and energy. Based on the research of geology characteristic and the fluid flow in the reservoir the comprehensive numerical simulation plan of the fractured-vuggy reservoirs were established. Through the selection of the simulation unit, fluid flow type and parameter equivalent the triple media reservoir simulation model was established. Considering the practical application the model was resolved by the DKR decomposition conjugate grads method. Based on the fine reservoir description of Dsitrict IV of the Tahe oilfield the various space type were classified and combined together. The geology model of Unit S48 was constructed. Two typical single well model was established according to the geology and the dynamic phenomena. Finally the single well model and the Unit S48 were simulated by the triple media reservoir simulator. Via the local grid refinement and coarsening in the simulation good matchs were gained. Based on the results of the simulation the reserve distribution, percent of reserve produced in various space and the natural energy were analyzed. The fluid was storaged in the fractures and vugs mostly and more than 90% the produced oil came from the systems. The energy belonged to the active one. The results of simulation accorded with the fact and showed the validity and practicability the research and the simulator.

塔河油田奥陶系碳酸盐岩油藏的地质研究表明，其储层中发育着很多大型的溶蚀洞、缝，储层的平面展布呈现出极度的非均质性，形成了典型的缝洞型碳酸盐岩油藏，根据各种孔隙介质在储层中的组合，将储层分为了溶洞型、裂缝-溶洞型和裂缝型三类；研究表明溶洞储层的发育和构造位置、裂缝的发育、潜水面和风化面的位置等因素有关；多期充注的油气成藏模式导致了流体复杂的赋存状态，由此提出了所谓的"瓶子模型"，解释生产过程中油水界面的变化；特殊的储集空间类型和流体分布特征导致油田在开发过程中表现出很大的不确定性和含水变化的复杂性，为了合理的解释油气田开发过程中的动态特征，提出了"缝洞单元"的概念，并制定了"缝洞单元"纵横向划分的基本原则和依据及划分方法，并对"缝洞单元"进行了分类和评价；基于地质特征和流体在其中流动规律的研究，提出了缝洞型碳酸盐岩油藏的数值模拟综合解决方案，通过模拟单元的选择、流动类型和参数的等效，建立了三重介质油藏三维三相数值模拟模型，采用不完全LU分解预处理共轭梯度法进行了求解；在塔河油田4区精细油藏描述的基础上，将各种类型的孔隙空间进行了归类组合，建立了S48单元的地质模型；通过对油井生产动态进行分析研究，建立了两类和油井地质、生产动态相对应的单井模型；最后应用三重介质油藏数值模拟软件对单井模型和S48单元进行了数值模拟，通过局部加密和粗化等技术模拟流体流动规律，取得了很好的拟合效果；结合数值模拟结果，分析了各种介质中的储量分布、储量产出的百分比以及地层的能量，认为塔河油田缝洞型油藏中流体绝大多数储集于缝洞系统之中，所产出流体90%以上也来自于缝洞系统，其底水能量属于较充足的类型；模拟结果和油田实际情况符合较好，说明了地质研究和油藏数值模拟研究的正确性。

They weren't aggressive, but I yelled and threw a rock in their direction to get them off the trail and away from me, just in case.

他们没有侵略性，但我大喊，并在他们的方向扔石头让他们过的线索，远离我，以防万一。

In slot 2 in your bag put wrapping paper, quantity does not matter in this case.

在你的书包里槽2把包装纸、数量无关紧要。