等容积的

The design mainly works on many factors which effecting the volume efficiency of fracturing pump. These factors are working conditions of the pump,imbibitional valve,expulsive valve,clearance volume,sealing property, condensability of influent, liquid leakage and elastic defletion of pump cylinder. Based on these facors, we should induce the efficiency expression, famulate differential eguation and emulational mathematical model of fracturing pump.

本设计主要针对影响压裂泵容积效率的因素如：泵的工作情况、吸液阀结构参数、余隙容积、密封性能、液体的可压缩性、液体泄漏、泵缸的弹性形变等方面进行分析，在此基础上导出效率的表达式，建立微分方程，并建立压裂泵效率仿真的数学模型。

To accelerate the widespread of Synchronous Chip Seal and improve the operation quality of Synchronous Chipsealer, key techniques which influence the operation quality is studied detailedly, including the control of distributing quality, the dynamics characteristics of hydraulic system and the spray characteristics of asphalt nozzle of Synchronous Chipsealer.1 The factors which influence Synchronous Chip Seal quality are studied. Fiducial probability of simultaneous distribution density is advised to be used in evaluating the distribution bias and standard deviation of asphalt and aggregates simultaneously, which is more advanced than the single index evaluation method used before.2 The volume efficiency formula of asphalt pump is revised after analyzing the data of volume efficiency with mathematical statistics, which is helpful to match the asphalt spray system and control the flow out of asphalt pump accurately. With equation deduction and experiment, dynamic of hydraulic system used in Synchronous Chipsealer is studied, which lay the theory foundation on improving the stability and efficiency from design and controlling.4 Simulation on hydraulic system used in Synchronous Chipsealer is done with AMESim; the results indicate that multi-circle parallel connected hydraulic system with constant pressure power is better than that with load-sensing pressure power at present, because the latter will oscillate when the multi circles work at the same time. This conclusion has been proved during the debug of Synchronous Chipsealer.5 Asphalt nozzle characteristics, such as flat jet shape, flow distribution, are studied with experiment, the results indicate that cross quality of asphalt distributing is not increased linearly follow the increase of fan overlap level, the best point usually exists between two whole overlap level, asphalt distributing quality is better than±4% at the 2.5 overlap level, meets the superior specified in standard; The distribution quality of Synchronous Chipsealer can be increased by spray asphalt of different flow rang with nozzle of different diameter

为了加快同步碎石封层技术的推广，提高同步碎石封层设备的作业质量，本文对同步碎石封层设备作业质量的影响因素与控制方法、液压系统的动力学特性和沥青喷嘴的喷洒特性等关键技术进行了深入细致的研究：1研究了影响同步碎石封层作业质量的因素，提出了采用联合密度分布置信概率对同步碎石封层中沥青洒布量和碎石撒布量的系统偏差和标准差指标进行综合评价的方法，克服了传统评价方法只能对单一指标进行评价的缺陷；2采用数理统计的方法，研究了沥青泵的容积效率特性，修正了沥青泵容积效率公式，为沥青喷洒系统的匹配和沥青泵出口流量的精确控制提供了依据；采用数理方程推导与试验相结合的方法，研究了同步碎石封层设备液压系统的动力学特性，为从设计和控制的角度提高同步碎石封层设备液压系统的稳定性和效率奠定了理论基础；3运用AMESim软件对采用负载敏感控制和恒压控制的两种同步碎石封层设备液压系统进行仿真，结果表明：负载敏感控制的并联液压系统在多回路同时工作时，由于液压泵排量控制参考压力不稳定，容易引发液压系统振荡，恒压控制的并联液压系统是目前技术条件下比较理想的同步碎石封层设备工作装置驱动方案；该结论亦通过同步碎石封层设备装机试验得到了验证。4采用试验的方法对沥青喷嘴的喷洒特性进行了研究，结果表明：沥青洒布的横向精度并不是随着喷洒扇面重叠度的增加线性增加，其最高点通常出现在二个重叠度之间的"半重叠位置"，"2.5重叠"洒布时，沥青的横向洒布精度≤±4%，可以达到国家相关标准中的优级标准；同步碎石封层设备还可以根据不同洒布量情况下的流量需求，采用不同通径的喷嘴进行喷洒，提高沥青洒布精度。

Converter steam can be fully used via increasing the running pressure of boiler, enlarging accumulating capacity, bring converter's boiler to play double function, improving steam quality, steadying steam pressure for RH and so on.

通过采取提高余热锅炉运行压力、增大蓄热容积、转炉汽化装置"一机两用"、改善蒸汽品质、恒定供真空泵的蒸汽压力等措施，转炉蒸汽能够充分得以利用。

6KW-700KW electric heating steam boiler circulation hot water unitvolumetric hot water boiler 2. Fuel gas steam boiler with 30KG/h-2000KG/h of evaporation capacity 3. Fuel gas steam boiler with heat production of 30000 to 1.2million kilocalorie / h 4. Full-automatic high-pressurehigh-temperature steam cleaning equipment 5. Industrial demineralized water treating equipment 6. Boiler fittingsgas-distributing cylinder etc.

目前，我公司的系列产品如下： 1、6KW～700KW电加热蒸汽锅炉、循环热水机组、容积式热水锅炉 2、蒸发量30KG/h～2000KG/h燃油、燃气蒸汽锅炉 3、产热量3万大卡/h～120万大卡/h燃油、燃气热水锅炉 4、全自动高压高温蒸汽清洗设备 5、工业软化水处理设备 6、锅炉配件、分汽缸等 7、德国朗通不锈钢热水锅炉

In aneurysm larger than 50% of the left ventricular volume, patch ventriculoplasty is superior to linear closure in maintaining normal left ventricular form and protecting left ventricular function.

左室容积50％的大型室壁瘤，补片成形术在保持左室正常形态和保护左室功能等方面优于直接缝合术。

Through researching the mechanism of biological nitrification and denitrification and actual project application of the technology and related literature materials, the obtained results are as follows:(1) Anoxybiosis is effective to the removal of COD; after the anoxic process, BOD/COD of the outflow increases, it shows that the degradation ability of wastewater is improved; anoxybiosis is insensitive when shock loading of inflow wastewater varies greatly;(2) It is demonstrated by the operation of inoculation and cultivating that biofilm takes two weeks to succeed in cultivating on packings and the removal ratios of NH3-N and COD get 50% and 70% respectively, when gas-water ratio is 6:1, HRT is 7.3 hour, water temperature is above 15°C;(3) It is demonstrated that gas-water ratio, hydraulic loading, HRT, temperature, pH etc are important factors which influence the removal effect of pollutants, when the gas-water ratio is 6:1, hydraulic loading is about 0.38kgNH3-N/m~3.d, water temperature ranges from 15°C to 27°C, pH ranges from 7.5 to 8.0, the BIOFOR removal effect of pollutants is the best;(4) The operation indicated that, this technology has strong ability of nitrification and denitrification; it has extremely vital significance for reducing the water body eutrophication;(5) It is confirmed the feasibility and the usability of preanoxic-BIOFOR process to treat L-lactic acid production wastewater. The experiment indicated that the treatment effect of this technology is very good and also shows that the technology has many advantages, such as small volume, high treatment efficiency, good effluent quality and strong endurance to load variation, this technology is a new and economical wastewater treatment process.

通过对生物脱氮机理的研究和该组合技术的实际工程应用，并结合有关文献资料，取得如下结论：(1)预缺氧池对L-乳酸生产废水中的COD去除具有一定的效果；废水中难降解的高分子物质经过缺氧工段分解为易于氧化降解的物质，浮状有机物在水解菌的作用下，将不溶性有机物水解为溶解性物质；预缺氧池具有较强的抗冲击负荷能力；(2)BIOFOR接种挂膜过程表明：HRT为7.3h、气水比为6：1、水温保持在15℃以上，经过半个月生物膜即以形成，NH_3-N和COD的去除率分别达到50％和70％左右；(3)研究表明：气水比、水力负荷、HRT、温度、pH等是影响污染物去除效率的重要因素，在气水比为6：1，NH_3-N容积负荷为0.38kgNH_3-N／m~3·d，温度在15℃-27℃，pH在7.5-8.0之间的条件下，BIOFOR对污染物的去除效率达到最佳；(4)运行表明，该组合技术具有较强的脱氮能力，对于减少水体富营养化具有十分重要的意义；(5)经过半年多实际工程的现场调试与运行，验证了利用预缺氧—BIOFOR组合工艺处理L—乳酸生产废水的可行性和实用性，得出该组合技术具有占地面积小，处理效果好，运行费用省，耐冲击负荷能力强等优点，是一项新型、经济的污水处理技术。

Conventional imaging technique which unsubtracted bone was used first,use 3D treatment on workstation to reconstruct cerebral vessels,to diagnose aneurysm,vascular malformation and tumor as well as to evaluate the preoperative and postoperative efficacy.Subtract bone techniques including one by one slice subtraction,semi-automatic digital subtraction radiography,matched mask bone elimination and control tube exposure light spot imaging technique can show the vessels more clear without the interference of bone as well as the relationship between vessel and pathological changes more accuracy.

首先是未去骨的常规成像技术，利用工作站进行多平面重建技术、最大密度投影、容积再现、表面遮盖法等多种三维处理得到头部血管及肿瘤图像，对动脉瘤、血管畸形及肿瘤血管进行病变诊断及术前、术后评价；其次是近年出现的逐层减影、半自动数字减影、匹配蒙片骨去除法及控制球管曝光点的减影等去除颅骨的减影技术，没有颅骨的干扰血管显示更加清楚，血管与病变关系显示更准确。

In this research, large volume stainless pots, high－quality pottery pots and enamel pots, instead of traditional small volume pottery pots, were used in storing several kinds of fresh liquor like "Shuanggou Liquor" etc.and the analysis of stored liquor by gas chromatography and atomic absorption spectrum indicated that the application of large volume stainless containers, instead of the traditional pottery pots, could not only advance liquor aging , produce flavour and remove precipitate, develop soft liquor style, stabilize and improve liquor quality,harmonize the balance of components , decrease liquor loss and liquor storage space,but also promote oxidation , reduction, esterification and molecular hydrogen bond association in the process of liquor storage.

对&双沟酒&等各香型酒，利用大容器的不锈钢罐、优质陶缸和搪瓷罐代替传统小容积陶坛或陶缸贮存新酒作了试验研究。采用气相色谱和原子吸收光谱对贮酒分析，得出采用不锈钢等大容器代替传统小陶罐贮存酒，不但可使酒在贮存过程中进行氧化、还原、酯化和分子氢键缔合作用，促进酒体老熟去杂增香，使酒体柔和老熟、成分平衡协调，稳定和提高酒质；而且还可以降低酒的损耗和减少贮酒库占地面积。孙悟

Under the operation and standard condition, the performance of Roots blower in sewage treatment plant is changed with inlet temperature and pressure, aiming at this problem, the method to determine volume flow and outlet pressure of blower are discussed. Combining with thermodynamics and the operation principle of blower, the calculation formula of flow is derived, and the using method of the calculation formula is explained through example of selection and design in actual engineering.

针对污水处理厂罗茨鼓风机在使用状态与标准状态下，进口温度、压力等条件发生变化时，导致风机的性能也发生变化这种情况，探讨了设计选型时，鼓风机容积流量、出口压力等的确定方法，结合工程热力学原理及罗茨鼓风机的工作原理，推导了流量的计算公式，并通过实际工程中选型设计的计算范例，说明了计算公式的使用方法。

Under the operation and standard con2dition , the performance of Root s blower insewage t reatment plant is changed with inlet tem2perature and pressure , aiming at this problem ,he method to determine volume flow and outlet pressure of blower are discussed. Combining with thermodynamics and the operation principle of blower , the calculation formula of flow is de2 rived , and the using method of the calculation formula is explained through example of selection and design in actual engineering.

针对污水处理厂罗茨鼓风机在使用状态与标准状态下，进口温度、压力等条件发生变化时，导致风机的性能也发生变化这种情况，探讨了设计选型时，鼓风机容积流量、出口压力等的确定方法，结合工程热力学原理及罗茨鼓风机的工作原理，推导了流量的计算公式，并通过实际工程中选型设计的计算范例，说明了计算公式的使用方法。

Finally, according to market conditions and market products this article paper analyzes the trends in the development of camera technology, and designs a color night vision camera.

最后根据市场情况和市面上产品的情况分析了摄像机技术的发展趋势，并设计了一款彩色夜视摄像机。

Only person height weeds and the fierce looks stone idles were there.

只有半人深的荒草和龇牙咧嘴的神像。