碳

In the 20 yr forest, 304. 6gm〓 C and 11. 6gm〓 N are inputted to the soil. In the 80 yr forest, 502. 3gm〓 C and 17. 2gm〓 N are inputted to the soil. In the climax forest, 430.3gm〓 C and 11. 9gm〓 N are inputted to the soil. Along with forest succession, the C inputted to the soil B layer by fine root increases because of the deepening of root depth distribution.

白桦山杨幼林、白桦山杨成熟林与原始阔叶红松林中，细根每年向林地周转的碳量分别为304.6gm〓、502.3gm〓、430.3gm〓，氮量分别为11.6gm〓、17.2gm〓、11.9gm〓；其中，随着演替的进行，由于根系分布的加深，细根每年向土壤B层周转的碳量会逐渐增加。

The friction performances of carbon face were investigated with an inertia friction tester. The torque curve of carbon face was ideal, the coefficient of static friction was lower than that of dynamic in 0.28 MPa, the friction coefficient of static and dynamic decreased with the braking pressure increasing. To the fiber face, the coefficient of dynamic friction of carbon face was more stable in cycle braking process, the wear rate was lower, and it was efficient to protect the couple plate not to be worn.

结果表明：碳质层的摩擦力矩在制动初期上升较快，中间过渡区平稳，尾部翘起较小；在制动压力小于0.28 MPa时静摩擦系数小于动摩擦系数，且动、静摩擦系数均随制动压力增加而减小；相对纤维层而言，采用碳质层摩擦时摩擦力矩曲线形态更好，连续制动时摩擦系数波动较小，磨损率低且能够有效保护偶件，是1种静/动摩擦系数比较低且适用于高载荷工况条件下使用的摩擦材料。

In the one half part, according to the strontium nature, thermodynamic calculation of correlative reaction and the principle of the vacuum aluminothermy reduction process, with the laboratory findings of preparation strontium by vacuum aluminothermy reduction compared and analyzed in different parameter conditions, a variety of factors which effect the decomposition rate of SrCO_3 and the percent reduction of strontia are gotten out. The factors include that the decomposition rate of SrCO_3 is influenced by different addition and pressure. They also include that the percent reduction of strontia is influenced by excess coefficient of reducing agent aluminium powder, the particle size of raw material or reducing agent, the pressure of barbecuing, temperature and reduction time. According to those, we can draw the conclusion as follows:(1) Decomposition temperature of SrCO_3 is decreased by adding carbon and alumina in different degree.(2) With quantitative carbon added under the vacuum condition, the decomposition temperature of SrCO_3 is decreased obviously, which can fall 150℃ compared with atmospheric pressure.(3) In keeping 1150℃ of 2.5h, under the 5Pa vacuum condition, the decomposition rate of SrCO_3 nearly keeps in 99% steadily.

在前半部分的真空铝热还原法中，根据锶的性质、相关反应的热力学计算及真空铝热还原法原理，通过对不同参数条件下的真空铝热还原法生产金属锶的实验结果的分析比较，得出了影响SrCO_3的分解率和氧化锶的还原率的种种因素，具体因素包括不同添加剂、不同气压对SrCO_3分解率的影响，还原剂铝粉的过量系数、原料与还原剂的粒度、制团压力、温度和还原时间等对氧化锶还原率的影响，得出具体结论如下：(1)添加碳和Al_2O_3能不同程度的降低SrCO_3的分解温度；(2)真空条件下加入一定量的碳可显著降低SrCO_3的分解温度，比之常压下可降低150℃之多；(3)在1150℃恒温2.5h、真空度达到5Pa的条件下，SrCO_3的分解率几乎保持稳定在99％；(4)氧化锶的还原率随还原剂过量系数的增大而增大，但是趋势越来越小，当过量系数超过25％后，氧化锶的还原率几乎不再增加；(5)氧化锶的还原率随原料与还原剂的粒度的变细而增加；(6)氧化锶的还原率随制团压力的增加而增加，但超过一定值后，氧化锶的还原率反而会下降；(7)氧化锶的还原率随还原温度的升高而增加；(8)氧化锶的还原率随还原时间延长而增加，在本实验条件下，超过2.5h趋于稳定。

The friction performances of carbon face were investigated with an inertia friction tester.The torque curve of carbon face was ideal,the coefficient of static friction was lower than that of dynamic in 0.28 MPa,the friction coefficient of static and dynamic decreased with the braking pressure increasing.To the fiber face,the coefficient of dynamic fric...

结果表明：碳质层的摩擦力矩在制动初期上升较快，中间过渡区平稳，尾部翘起较小；在制动压力小于0.28 MPa时静摩擦系数小于动摩擦系数，且动、静摩擦系数均随制动压力增加而减小；相对纤维层而言，采用碳质层摩擦时摩擦力矩曲线形态更好，连续制动时摩擦系数波动较小，磨损率低且能够有效保护偶件，是1种静/动摩擦系数比较低且适用于高载荷工况条件下使用的摩擦材料。

Where the authentic compound of a particular carbon number was not available, homologous plots of log retention time against carbon number were prepared on two different stationary phases using available compounds of the same homologous series.

凡正宗 特定化合物碳数不可用的日志保留时间同源图对碳数在两个不同的制备利用现有固定相化合物相同的同源序列。

This is a cylinder composed solely of carbon atoms, and one of its properties is good electrical conductivity.

碳纳米管是一种全部由碳原子组成的圆柱体，它的一大优点是良好的导电性。

Configurational isomerism is then due to the presence in the molecule of one or more dissymmetric centres ,in the simplest case asymmetric carbon atoms ,each of which can have and absolute configuration; and ,or ,to the presence of double blonds which can give cis- and trans-geometrical isomers .

构型异构是由于分子中存在一个或一个以上的不对称中心，在最简单的情况下是不对称碳原子，每个不对称碳原子的绝对构型是和；或者，如果存在双键的话，那么将给出顺式和反式几何异构体。

Jilin Province Everthriving Carbon Dioxide Plastic Technology Co., Ltd is EIG's holding company that specializes in natural gas processing, based on reduce carbon emissions and to reduce global greenhouse gas emissions as a strategic convergence, use Jilin Qianguo region high carbon natural gas as raw materials, use leading international patent technology for deep processing,to produce carbon dioxide based degradable plastic and clean energy LNG products.

吉林省中兴恒和二氧化碳塑料科技有限公司为中兴恒和投资集团旗下专业从事天然气深加工控股企业，公司以降低碳排放，减少全球温室效应为战略趋导，以吉林前郭地区高碳天然气为原料，应用国际领先的专利技术进行深加工，生产二氧化碳基降解塑料以及清洁能源LNG产品。

Content of soluble sugar, sucrose and reducing sugar successively went up quickly, till 6 to 7 weeks after anthesis, the maximum value was achieved, after this time, as the cormel gradually developed maturely, content of soluble sugar, sucrose and reducing sugar declined at different speed, and m etabolism of inner carbohydrate was prone to slowness.

同时期籽球内碳水化合物代谢极为旺盛，籽球内可溶性糖、蔗糖和还原糖含量继续快速上升，至花后第6～7w达到最大值，此后随着籽球的成熟，可溶性糖、蔗糖和还原糖含量不同程度下降，内部碳水化合物代谢趋于缓慢。

In this study we used a more accurate Kolmogorov-Crespi potential to describe the corrugation of the nanotubes.

第三，我们通过使用更加准确的Kolmogorov-Crespi势函数描述双壁碳纳米管的层间相互作用，研究了双壁碳纳米管的滑动和转动磨擦。

For a big chunk of credit-card losses; the number of filings (and thus charge-off rates) would be rising again, whether

年美国个人破产法的一个改动使得破产登记急速下降，而后引起了信用卡大规模的亏损。

Eph. 4:23 And that you be renewed in the spirit of your mind

弗四23 而在你们心思的灵里得以更新