真空的

Vacuum process Iron plate Trame,Bass section terminat-ed by agraffe.

真空处理的钢板、低音区由搭扣终止。

This machine is a good choice to make air brick ,compare with the same type of TD Series,the cost will save 30% and the capacity will be 20%higher ,and the power also save 30%.

产品说明：该机是针对我国广大实心砖厂改造转产空心砖而适时开发的，与同型号TD型真空机相比，其投资节省30%，产量提高20%，能耗降低30%。

The raw material as clay enter the material box after vacuum clean ,will be molding bye the knife blow ,when change the different model ,it will make different type air brick .

泥土等原料通过真空净化后，进入受料箱，由下级绞刀挤出成型，当机口采用不同模型时，可生产各种规格的空心砖。

The quality changes of pakchoi in cold storage with vacuum cooling and air cooling, at 2℃ for 7 days, 10 days, 14 days, 19 days and 29 days were studied.

摘 要 试验研究了小白菜采后真空冷却和空气冷却后，在2℃条件下冷藏7天、10天、14天、19天和29天的品质变化。

It is used to put through or cut off the air passage in vacuum pipeline.

阀门用于接通或切断真空管路中的气流。

And we designed an air-driven rotary actuator with vacuum fixtures to place and hold the die-cast parts, and an assembly station.

同时我们设计了一个气动旋转驱动装置，其用来固定真空夹具的位置和保持模具部件，装配单元。

As far as cosmetic products are concerned, this AIRLESS pack allows a much longer ?

就化妆品而言，这真空包装允许的时间长得多？

For an astronaut in space, the suit is all that stands between you and the deadly airless vacuum outside.

但是，对于宇航员来说，宇航服是将其与外界致命真空隔离开来的唯一物体。

Through designing of composition and structure of the bioactive graded coating,innerstress and its distribution in the coating were analyzed and calculated, the resultsshowed that when composition distribution coefficient n was 1.5, a reasonable stressdistribution could be got, that was at the beginning of deposition the suspension containingrichly BG granules was used so that a rich BG granules layer, a good transitional layerbetween BG layer at the bottom and the coating could be obtained at the titanium alloy side,the bottom of the coating; the stress value near the interface and surface and its character,pressure stress or tensile stress, were decided by the character of its composition itself.Changing composition distribution coefficient n could only change the variation tendency ofstress in the coating, but did not change the stress distribution rule in the coating. Thethinner the coating is, the sharper stress variation in the coating is, which does not mean thatthicker coating is better because the thicker the coating is, the little the permitteddeformation of coating is, so the coating thickness should be thinner, for example, about50μm for bending applications, but for applications only bearing pure shear stress, such asroot of tooth implant, the coating can be thicker little, for instance, about 80～100μm. The study on electrification characteristic and electrophoresis deposition of HAand BG granules in aqueous and non-aqueous solution system found that EPD almost didn'toccur in aqueous solution system. However, because HA granules take position charges inabsolute alcohol, a homogeneous EPD be carried out on the cathode titanium alloy slice, but taking negative charge in absolute alcohol the BG granules not be deposited on the cathode. A guided HA crystallizing, 100～300nm, on surface of the BG granules be realized by metathetical reaction, which cover BG granules with HA microcrystals and make the covered BG granules taking position charges in absolute alcohol, sequentially realize the EPCD of the BG and HA granules on the cathode, so it is feasible to make a titanium alloy/BG/HA bioactive graded coating by making use of EPCD technology. The corrosion experiment of rich boron bioglass coating and plasma spray coating showed that split phase, rich boron and rich silicon phase, occurred during its preparation. In basic medium the corrosion behavior of 〓 BG coating showed uniformity corrosion, the corrosion mostly occurred at rich boron phase area, therefore batch formula design of BGshould avoid the occurring of split phase. The corrosion appearance of plasma spray coatingappeared a non-uniform corrosion, mostly occurred at the edge of the laminated HA moltendrops, and emerged an accelerated corrosion tendency, which will easyly lead to corrosioncrackles extending to the interface and the happening of osmotic interfacial corrosion, thatmay be one of the major reasons leading to the coating cracking-off in the later period. Thetesting results of thermal expansion coefficient of 〓 and 〓BG showed the thermalexpansion coefficient of 〓 BG matched with that of titanium alloy better, and 〓 BG couldsinter with titanium alloy into densification enamel layer at low temperature (720℃).

将Ti6Al4V合金在1000℃下进行真空热处理会降低其力学性能，且合金内的V元素会向表面富集，因此，钛合金真空热处理和表面涂层的烧结温度不能过高，即应低于其相转变点；通过对生物活性梯度涂层的组成和结构的设计，分析和计算了梯度涂层内的应力大小和分布，结果表明：对于本研究，当成分分布系数n=1.5时，可以获得较合理的涂层力学性能，即在沉积开始时，采用富含BG颗粒的悬浮液，以便在钛合金侧获得同底层BG有良好过渡的富BG涂层；梯度涂层界面和表面的应力大小、性质由材料组成本身的性质决定，改变成分分布系数，只能改变涂层内应力变化的趋势；涂层的厚薄不影响涂层内的应力分布规律，但涂层越薄，涂层内的应力变化越快，但这并不意味着涂层越厚越好，因为涂层越厚，涂层允许的变形越小，对于应用于弯曲受力部位的涂层而言，涂层应薄一点为好(50μm)；而对于仅纯受剪切应力的部位，如牙根种植体，涂层可适当加厚(80～100μm)；通过对HA和BG颗粒在水溶液体系和非水溶液体系中的带电特性和电泳沉积的研究发现，它们在水溶液体系中很难发生电沉积；在无水乙醇溶液中，HA颗粒带正电，可在阴极钛合金片上发生均匀的电泳沉积，而BG颗粒则带负电荷；利用复分解反应法，可以制得100～300nm的HA，通过诱导HA在BG颗粒表面结晶，可对BG颗粒进行表面包覆，获得了被HA包覆的BG颗粒，改变了BG颗粒表面的带电特性，使BG和HA颗粒在无水乙醇中均带上正电荷，从而实现了HA和BG颗粒在阴极上的共沉积。

These facts conflicted with current theory and were not explained until 1905, when Einstein produced his quantitative law and developed the theory of quanta of light or photons, which was verified much later by Millikan.

此后，莱纳德又继续拓展赫兹关于光电效应的研究，他分析了在高真空环境下光电效应的特性和本质，证明了当紫外线照射在金属上时，会使电子从金属表面逸出，并在真空中传播，电子在电场中被加速或减速，电子轨迹在磁场中改变。通过精确的实验，他证明发射的电子数量正比于入射光所带的能量，而电子的速度，或者说它们的动能，却与入射光能量无关，当入射光的波长减小时，电子速度增大。这个事实与当时的理论是相冲突的，经典物理学无法解释莱纳德的光电效应实验结果。

With Death guitarist Schuldiner adopting vocal duties, the band made a major impact on the scene.

随着死亡的吉他手Schuldiner接受主唱的职务，乐队在现实中树立了重要的影响。

But he could still end up breakfasting on Swiss-government issue muesli because all six are accused of nicking around 45 million pounds they should have paid to FIFA.

不过他最后仍有可能沦为瑞士政府&议事餐桌&上的一道早餐，因为这所有六个人都被指控把本应支付给国际足联的大约4500万英镑骗了个精光。