相移

Three are three major actions that Mn effects fracture behavior in the alloy at room temperature, as follow: One is that Mn fines grains, antiphase domains and weakens dislocation clog, which retain formation of cleavage crackle. The second is that Mn decreases APB energy and promotes slop and cross slip, in particular, a large number of cross slip make deformed APBs transform from line type into zigzag type and the APBs interact and cross each other, resulting in propagation of cleavage cracks. The last is that Mn raises the relative proportion of cleavage strength to grain-boundary strength and then restrains formation and propagation of cleavage crack.

Mn对合金室温断裂行为的影响主要反映在三个方面，一是Mn的存在细化晶粒和反相畴，使得位错塞积程度减小，从而阻碍解理裂纹源的生成；二是Mn的存在提高解理强度与晶界强度的相对比值，从而抑制了解理裂纹的形成和扩展；三是Mn降低反相畴界能量、促进超位错的滑移、交滑移，特别是断裂前位错大量的交滑移使形变反相畴由直线型变为折线"Z"字型，反相畴界间的相互作用、相互交错阻碍了解理裂纹的扩展。

Combining with the optimization method for the first time, error estimation of the traditional five-sample phase shifting algorithm is studied.

针对移相法相位测量过程中的移相误差，结合优化的方法研究了传统五步移相算法的误差估计。

Combining with the optimization method for the first time, error estimation of the traditional fivesample phase shifting algorithm is studied.

针对移相法相位测量过程中的移相误差，结合优化的方法研究了传统五步移相算法的误差估计。

The conclusions were as follows: theνO-H andνC=O IR absorption maxima shifted towards higher wave numbers after imprinting 17β-estradiol on TFMAA-co-TRIM copolymer with the red shift of theνO-H groups being apparent after precipitation polymerization for 16h while that forνC=O groups being observed after polymerization for 24h. A strong interaction between TFMAA and 17β-estradiol was confirmed by the high selectivity for 17β-estradiol, as indicted by the values of the separation factor of isomers of 17β-estradiol/17α-estradiol (2.28) and the imprinted factor (3.01). Particle diameter of TFMAA-co-TRIM polymer was between 300 nm and 1.5μm, which suited well for solid phase sorbent throughout at low column pressure. The recognition of imprinting TFMAA-co-TRIM polymer for sterol molecules was driven by enthalpy eluted with acetronitile, and low temperature was in favor of the separation of sterol structure analogues on imprinting column. TFMAA-co-TRIM polymer possessed of determinate anti-heat stability, with melting point beginning at 255.84℃, Tp=257.40℃, control TFMAA-co-TRIM polymer and imprinting TFMAA-co-TRIM polymer were respectively decompounded at 267.79℃and 343.11℃, and solid micro-extraction noddle prepared by the special polymerization also showed definite recognition for 17β-estradiol by GC/MS detecting at 270℃. By selection of various washing and elution solvents, elution reagents of close polymerization system were of more advantage in template molecules retention and recognition on molecularly imprinted solid phase extraction column. At a certain extent, progesterone, 17α-estradiol, 17β-estradiol and 4-androstene-3, 17-dione could be intercepted on the MISPE column. Especially, MISPE had high selectivity for progesterone, and imprinting TFMAA-co-TRIM polymer could achieve adsorption balance within 50 min by absorption kinetics test for 17β-estradiol. However, MISPE column showed better selectivity and enrichment property for 17β-estradiol than C18 and CSPE columns according to the data from HPLC and GC/MS analyses. Recovery of 17β-estradiol on MISPE column was up to 85.5% while when prime extracting solution of milk powder was sampled, the recovery of CSPE and C18 columns were 43.7% and 30.7%, respectively.

通过研究阐明：紫外聚合产物TFMAA-co-TRIM中的νO-H振动吸收峰在聚合16h后红移，νC=O振动吸收峰在聚合24h后红移；TFMAA-co-TRIM对雌二醇异构体的印迹因子达到了3.01，α为2.28，优于其它功能单体参与得到的聚合物识别特性；TFMAA-co-TRIM聚合物粒径介于300 nm至1.5μm之间，作为色谱固定相具有良好的通量和低的柱压；在乙腈流动相中，TFMAA-co-TRIM分子印迹固定相的分离过程主要被焓驱动，低温有利于分子印迹固定相分离甾醇结构类似物；TFMAA-co-TRIM分子印迹聚合物在255.84℃时开始熔融，Tp=257.40℃，聚合物CP的降解温度在267.79℃，MIP降解温度在343.11℃，制备的固相微萃取头初步经GC/MS 270℃的耐热性测定；不同的洗提溶剂筛选证明了选择接近聚合溶剂的洗脱体系更有利于MISPE发挥识别效应；分子印迹固相萃取柱对孕酮、17α-雌二醇、17β-雌二醇和雄烯二酮都具有不同程度的保留特性，可作为此类化合物的吸附材料，特别对孕酮强保留的富集特性，可作为孕酮的选择性识别吸附剂，其分子印迹聚合物对17β-雌二醇的吸附动力学测定显示在50 min内基本达到吸附平衡，具有作为传感器核心敏感材料的潜力；对比萃取奶粉中17β-雌二醇性能，MISPE柱比非分子印迹固相萃取柱和C18柱具有更高的保留，回收率依次为85.5%，43.7%和30.7%。

This study shows that there are 4 kinds of volcanic facies in deep volcanics in north Songliao Basin: eruptive facies, overflow facies, volcanic vent facies and volcanic sedimentary facies. There are 4 volcanic eruption cycles: Huoshiling period, Shahezi period, Yingchengzi period and Quantou period. There are 4 structural evolution stages: north-south accumulation, west-east subduction, uplift mantle and thin crust, alternative open and close. There are 4 kinds of pool-forming patterns:(1) pattern with the migration along the unconformity and fault to the near crater;(2) pattern with the migration along unconformity and fault to the rift margin;(3) pattern with the migration along unconformity, fault and fracture to the source rock;(4) pattern with the migration of the deep gas along the deep and large fault to the volcanic trap.

研究认为，松辽盆地北部深层火山岩主要存在四种火山岩相：即爆发相、溢流相、火山通道相、火山沉积相，划分为四个火山喷发旋回：即火石岭期、沙河子期、营城子期、泉头期，经历了四个构造演化过程：即南北夹攻、东西俯冲、幔隆壳薄、开合交替，具有四种成藏模式：即沿不整合面和断层运移至近火山口处火山岩圈闭聚集成藏模式、沿不整合面和断层砂岩疏导层运移至断陷边部火山岩圈闭聚集成藏模式、沿不整合面及断层、裂缝运移至源岩区内凹中隆火山岩圈闭聚集成藏模式、深部无机成因天然气沿深大断裂运移至火山岩圈闭聚集成藏模式。

In this paper, arrangement scheme of a novel multi-star phase shifted pole changing coil was given and the methods to determine coil split ratio were analyzed. According to electromagnetic theory, 2D electromagnetic mathematical model in which stator windings were spitted coil was developed, and magnetic field distribution of the novel motor at starting was solved by finite element method, starting performance of motor was calculated. Based on energy method, rotor slot leakage reactance under different poles and different loads were calculated, and the variation of rotor slot leakage reactance with loads was gotten. Based on time-step finite element method, distribution of branch current in stator windings and operating performance were calculated and analyzed when branch was unbalance, the method to calculate circulating loss in stator windings of novel multi-star phase shifted pole changing motor was given, and the effects of the loads variation and degree of unequilibrium on circulating loss in stator windings were calculated and analyzed.

论文系统的给出了采用分裂线圈法新型多星形移相变极绕组的排列方案，进一步分析线圈分裂比的确定方法；根据电磁场理论，建立了定子为分裂线圈绕组的电机二维电磁场数学模型，并采用场路耦合法求解了新型多星形移相变极电机起动时的磁场分布，计算了电机起动性能和基于能量法计算了不同极数下起动时转子槽漏抗和不同负载时转子槽漏抗，得出转子槽漏抗随负载变化的规律；采用时步有限元法计算分析了定子绕组支路不平衡时支路电流的分布情况及运行性能，给出了新型多星形移相变极电机定子绕组环流损耗的计算方法，分析比较了负载的变化和支路不平衡度大小对定子绕组环流损耗的影响。

of measuring practical retardance value and judging the fast or slow axis of quarter-wave plate .

测量1/4波片实际相移量并判定快慢轴的方法。

The statistical properties of mobile radio channel are studied by means of computer simulation, especially in wideband channel.

应用准同步思想，构造了新的扩频码，扩频码在零相移附近具有极低的互相关值，满足准同步码分多址系统的要求。

Considering the skin effect and skin depth, a thin wall model and a thick wall model are derived creatively with different frequencies of discharge currents, which are used to study the relation between the spark location and the potential difference for a cuboid electrode.

本文从放电电流为任意函数入手，阐述了电极电位差法的检测原理，首次利用傅立叶级数推导了电位差与放电时间的关系，证明了放电电流为阶跃函数时，电位差与放电时间成指数关系；当放电电流中含有高频振荡时，电位差与放电时间的关系为指数曲线上叠加相移后的高频振荡；根据放电电流频率的不同，考虑到趋肤效应和趋肤深度，首创了薄壁模型和厚壁模型，研究了长方体电极下表面二维放电点位置与电位差的关系。

In the view of Photo-Optic Mechanics,Elastic Mechanics,and FEM method,the deformation of inner disfigurements in structures was studied with ESPI and Phase-Shift in this dissertation and some valuable results and conclusions were obtained.

本文从现代光测力学、弹性力学以及有限元数值计算的角度，应用电子散斑干涉法和相移技术对缺陷进行了研究和分析，得到了一些有价值的研究结果。

The labia have now been sutured together almost completely.The drains and the Foley catheter come out at the top.

此刻阴唇已经几乎完全的缝在一起了，排除多余淤血体液的管子和Foley导管从顶端冒出来。

To get the business done, I suggest we split the difference in price.

为了做成这笔生意，我建议我们在价格上大家各让一半。