电极的

The manufacturing technique of abrasive tool is a key and interrelated technique in graphite electrodes abrading, and it directly affects abrading results.

精度是研磨加工中很重要的一个工艺指标，本文对研磨复形精度进行了实验研究，认为从零件原形到石墨电极的过程中，精度主要损失在从原形到研具的过程中，并对此提出了二次成型的方法和制造原形时进行误差补偿的方法来解决这一问题。

Several kinds of electrical capacity coupling plasma-discharge apparatuses for induced-polymerization process had been designed to study the influence of structure parameters of the equipment on discharge performance.

自制了用于引发聚合过程的电容耦合等离子体放电装置，通过对放电装置结构的研究发现，比较理想的结构参数为：反应室直径为70mm，反应室长度为31cm，两块电极的位置应尽可以靠近。

The Potential and the discharge time increased, and then decreased with the increasing thickness of thin films. When the thickness was 90 nm, the potential was -0.893 V, which was the most negative, and the discharge time was 190 minutes, which was the longest.

随着薄膜厚度的增加，相应的SNH电极的光充电最终电位、放电时间先地加，后减少，当膜的厚度为90nm时，其光充电最终电位、放电时间分别为-0.893V，190分钟。

With the niobium densities in SrTiO_3 increasing, the final potential and the discharge time of the SNH electrode first increased. When the density of Nb in SrTiO_3 thin films was 2%, the Potential was -0.9 V and the discharge time was 25 minutes.

随着掺杂浓度的提高，相应的SNH电极的光充电的最终电位及其放电时间都增加，当Nb的掺杂浓度为2％时，其值分别为-0.9V，235分钟。

The Company is a production of scientific research as one of the specialized production gas appliance ignition electrode factories, with systems management concepts and advanced production testing facilities, products widely used in gas stove, gas water heater, gas oven, barbecue pits.

本公司是集生产科研为一体的专业化生产燃气具用点火电极的工厂，具有系统的管理理念和先进的生产检测设施，产品广泛适用于燃气灶具，燃气热水器，燃气烤箱，烧烤炉等。

The conclusion is drawn from the simulations that the secondary electrons will go out from the sample surface more easily with the decrease of the half cone angle of tip and the increase of secondary electron energy, tip-sample separation and the distance of the emission site away from the point directly under the tip.

模拟的结果发现针尖半锥角越小、次级电子能量越高、针尖样品间距越大、次级电子出射位置离针尖正下方越远则越有利于次级电子的逸出，此外通过栅网与一个平行于样品表面的地电极的共同作用，会对次级电子产生聚焦作用。

We provide a brief survey of recent results on the electronic transport characteristics of single molecules as well as self-assembled monolayers.

摘要介绍了测量单个有机分子导电性质的一些进展，包括分子的尺寸效应、官能团效应、分子与电极的接触效应等，以及分子逻辑器件的初步研究。

The formation mechanism of the cerium compounds on the zinc powder subst rate was preliminarily discussed , and the effect s of the cerium compounds on the cycle and discharge properties of the zinc elect rodes were also investigated.

L Ce (NO 3) 3溶液中成功制得含有铈化合物的锌基复合粉，探讨了铈化合物在锌粉基体上的形成机制，并研究了锌基复合粉中铈化合物对锌电极的循环放电性能的影响。

The gun body of vacuum plasma welding chamber for titanium and titanium alloy imported from Germany has been reformed based on the principle of compression effection of plasma arc and stability of electric arc.

为了满足大尺寸钛及钛合金电极的焊接要求，宝钛集团有限公司依据等离子弧的压缩效应原理及电弧的稳定性原理，对从德国引进的钛及钛合金真空等离子焊箱枪体的阴极和喷嘴进行了技术改造。

By comparison among several detection technologies,the impedance detection method was chosen to realize the miniature system.The detection solution was further supp...

通过基于单片机的检测系统对电泳实验分离结果进行一系列的阻抗检测实验，实验结果证明检测电极的设计是可行的。

I can not make it blossom and suits me

我不能让树为我开花

When temperatures are above approximately 80 °C discolouration of the raceways or rolling elements is a frequent feature.

当温度高于 80 °C 左右时，滚道或滚动元件褪色是很常见的特征。