电极

Features of a practical asymmetric electrode system were studied.

设计了一种非对称电极，这种非对称电极的阳极是Chang电极或Ernst电极，阴极是由直线和圆弧构成的简单电极。

the electrode system is one of the most sensitive and crucial parts in eit system.in this paper a method for eit electrode structure and parameter optimizing design,taking example for compound electrode,has been presented,which is based on the coercive equipotential node model of the line electrode.an imitation research plat-form of electrode structure and parameter optimizing design has been developed.by the methods,the variety influ-ences of electrode structure and parameters on reconstructed image and measurement sensitivity can be obtained.this will provide theory basis for the electrode construction optimizing design of real eit system.

eit电极系统是整个eit系统最为敏感和关键的部分之一。本文在线电极强制等势点模型的基础上，以复合电极为例，提出了一种电极结构及参数优化设计方法，并建立了电极结构参数优化设计仿真研究平台。可针对不同电极结构和各种参数变化给出其对eit成像质量和检测灵敏度的影响，进行优化设计，从而为实用化eit系统电极结构设计提供理论依据。

The PANI-C composite electrodes had better cycling stability than PANI electrodes and the specific capacitance of the composite electrodes was 587F/g, which was much higher than that of the pristine activated carbon (140F/g), owing to the faradic reaction of PANI with the electrolyte.

聚苯胺／活性炭复合电极比活性炭电极具有更高的容量，同时比聚苯胺电极具有更好的循环稳定性。聚苯胺／活性炭复合电极的比电容为587F/g，而活性炭电极仅为140F/g。

The lower end of the discharge chamber body is in hermetically-threaded connection with a fixed electrode; an operation electrode is mounted at the upper end of the discharge chamber body; the lower end of the operation electrode can be movably mounted in a conduction fixed ring; a fit clearance between the lower end of the operation electrode and the conduction fixed ring is 0.1 to 0.15mm; the conduction fixed ring is in hermetically-threaded connection with the upper end of the discharge chamber body; the conduction fixed ring is connected with a grounding wire; a discharge chamber is formed between the conduction fixed ring and the fixed electrode at the inner part of the discharge chamber body; the upper end of the operation electrode is fixedly connected with an insulation handle.

本发明公开了一种隔爆放电器，包括由防爆有机玻璃制成的筒形放电室本体，所述放电室本体的下端密封螺纹连接有固定电极；所述放电室本体的上端安装操作电极，所述操作电极的下端可移动地安装在导电固定环内，与导电固定环配合间隙为0.1～0.15mm，导电固定环密封螺纹连接在放电室本体的上端，导电固定环上连接有接地线；在放电室本体的内部导电固定环和固定电极之间形成放电室，所述操作电极的上端固接绝缘手柄。

The working electrode was prepared by way of depositing TiO2 thin film on conductive ITO glass substrate via sol-gel method. As 3-electrode testing system was then formed combining it with SCE as reference one, black platinum electrode as auxiliary one and PC+LiClO4 solution as electrolyte.

采用溶胶－凝胶法在ITO导电玻璃基片表面制备一层TiO2薄膜，将其作为工作电极，与作为参比电极的饱和甘汞电极、作为辅助电极的铂黑电极、作为电解质溶液的碳酸丙烯酯＋高氯酸锂一起构成三电极测试体系。

Trans-Blot Cells and Systems 170-3825 Trans-Blot Cell With Wire Electrodes and PowerPac HC Power Supply, 100120/220240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions 170-3850 Trans-Blot System With Plate Electrodes and PowerPac HC Power Supply, 100120/220240 V 170-3853 Trans-Blot System With Plate Electrodes, Super Cooling Coil, and PowerPac HC Power Supply, 100120/220240 V, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm), power supply, power cord, instructions 170-3910 Trans-Blot Cell With Wire Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) 170-3939 Trans-Blot Cell With Plate Electrodes and Super Cooling Coil, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) 170-3946 Trans-Blot Cell With Plate Electrodes, includes 2 gel holder cassettes, buffer tank, lid with power cables, 4 fiber pads, 1 pack precut blot absorbent filter paper (15 x 20 cm) Trans-Blot Cell Accessories 170-3912 Super Cooling Coil, required for all high-intensity transfers 170-3913 Gel Holder Cassette, includes 2 fiber pads 170-3914 Fiber Pads, 15.5 x 20.5 cm, 6 170-3920 Trans-Blot Standard Wire Electrode Card, cathode 170-3921 Trans-Blot Standard Wire Electrode Card, anode 170-3922 Trans-Blot Cell Buffer Tank 170-3923 Trans-Blot Cell Lid With Power Cables 170-3943 Trans-Blot Platinum Anode Plate Electrode 170-3944 Trans-Blot Stainless-Steel Cathode Plate Electrode 170-3945 Trans-Blot Plate Electrode Pair, platinum anode and stainless-steel cathode 16 规格:说明: Trans-Blot Plus

电泳转印槽组件 1。缓冲液槽及带有电缆的盖 2。凝胶支架转印夹 3。纤维衬垫 4。电极丝 5。电极板 6。特级冷却芯 Trans-Blot 转印槽是功能灵活的转印设备，可理想地用于多种转印应用。Trans-Blot 转印槽特点包括：*能进行多胶转印，可容纳3 块PROTEAN I xi 凝胶、6块Criterion 凝胶、12块Mini-PROTEAN 3 或Ready Gel 预制胶*多组参数灵活可设，可调节的电压设置（从30 V 的过夜转印到200 V 的1 小时快速实验）*电极间距设置为8 cm 用于标准印迹杂交，或设置为4cm 用于高强度印迹杂交*可选择板式电极：涂有铂金的钛作为正极，不锈钢为负极，能提供高强度电场和比其它电极更高的电流密度。或选择较经济的铂金电极丝*通过特级冷却芯和水循环仪来调节温度―是天然酶（4°C）或高强度转印的理想选择，随着转印时间增加（多达24 小时），不会引起缓冲液耗竭（在高强度转印中必须使用冷却芯，也推荐用于所有板式电极的应用）*带铰链的凝胶支架转印夹能避免滑动，确保凝胶与印迹膜间的紧密接触；每个转印夹都有颜色标记以保证在转印槽中的正确定位 Trans-Blot 转印槽的锁闭凝胶支架转印夹系统。转印夹（1）支撑凝胶（2）印迹膜（3）两侧有纤维衬垫和滤纸（4）确保凝胶三明治内的完全接触。凝胶夹垂直插入缓冲液槽中（5）。

Bi-doped lead dioxide electrode s on Ti substrate were prepared by electro-deposition,and their performances were compared by measurements of the decolored ratio of Acid Bright Yellow 2G.

并利用循环伏安法和扫描电镜，分别对掺Ni 二氧化铅电极和普通二氧化铅电极进行表征，发现提高电极析氧电位和改变电极表面晶粒分布是Ni修饰电极比未修饰电极催化效果提高的主要原因。

Using the con- tinuous current law to deposit Pt and Fe, then through the high temperature heat treatment , the electrodes were prepared and characterized by scanning electronic microscope, X-ray diffraction, energy disperse spectroscope as well as inductively coupled plasma.

将预处理后的钛片作为电极基体，采用恒电流法沉积Pt和Fe，通过高温热处理得到Ti/Pt-Fe电极，通过扫描电镜、X射线衍射、电子能谱以及等离子发射光谱等方法对所制备电极表面形貌、组分的合金化程度、催化层成分组成以及电极寿命等进行了表征；在煤浆电解过程中，采用两电极体系，对所制备电极的电催化活性进行了测试。

In this experiment, BSA and chitosan are taken as cross-linking reagents, and nanoparticles gel and uricase are cross-linked on egg membrane.

本研究将改性纳米SiO_2凝胶和尿酸酶通过交联剂固定于蛋膜上，将酶膜紧贴于铂盘电极表面，然后以自制铂片电极为对电极、甘汞电极为参比电极，组成三电极体系，测定体液中尿酸的浓度。

The chemistry compatibility of the electrode and electrolyte at high temperature and effects of the sintering temperature on the microstructure and electrochemical properties were investigated, respectively. The results showed the sintering temperature has effect on the polarization resistance of the electrode. At moderate temperature, a fine microstructure with moderate porosity and well-necked particles has been formed, and the electrode gave the lowest polarization resistance.

考察了电极材料与电解质材料在高温时的化学相容性；研究了烧结温度对电极的微观形貌及电化学性能的影响，结果表明，烧结温度过高或过低都会导致电极极化面电阻的增加，当电极的烧结温度适中时，电极表面粒子有一定的烧结连接，并且有一定的多孔结构，电极的极化面电阻达到最小值。

The absorption and distribution of chromium were studied in ryeusing nutrient culture technique and pot experiment.

采用不同浓度K2CrO4(0，0.4，0.8和1.2 mmol/L)的Hoagland营养液处理黑麦幼苗，测定铬在黑麦体内的亚细胞分布、铬化学形态及不同部位的积累。

By analyzing theory foundation of mathematical morphology in the digital image processing, researching morphology arithmetic of the binary Image, discussing two basic forms for the least structure element: dilation and erosion.

通过分析数学形态学在图像中的理论基础，研究二值图像的形态分析算法，探讨最小结构元素的两种基本形态：膨胀和腐蚀；分析了数学形态学复杂算法的基本原理，把数学形态学的部分并行处理理念引入到家实际应用中。