瓷

The formation of theory concerning interpenetrating phase composite facilitated this progress.

工业上相互渗透相复合体理论的形成为牙科高强度全瓷材料的研制提供了线索。

In Shaanxi, Henan, Shandong and other places are found in such kilns to a maximum of Henan.

在陕西、河南、山东等地均发现了这类瓷窑，以河南为最多。

It is easily painted, enameled,or lacquered.

它容易地被画、涂以瓷釉、或涂漆。

Most representative are the little chips and holes or mushikui ("moth-eaten" edges), the premeditated result of rough, poorly levigated clay and thick bubbly glazes that fail to bond properly with the porcelain body.

能够代表这种观点的多数是小碎片和小洞或者虫咬的边缘，这是预先采用粗糙、打磨不精的陶土和厚厚的泡状釉面所产生的结果，不能与瓷体完美的结合在一起。

The liquating of crystal is useful to its shape and size and a thin layer of glass will bring about which is helpful to glaze gloss. Through cross experiment design, the reasonable range of oil-drop glaze chemical composition is studied and the limitation that single special clay is added to glaze batch is broken. It is proved that using ordinary ceramic raw materials to produce oil-drop glaze is feasible if the chemical composition of glaze is reasonable and the technology control is suitable. In addition, through the experiment it is found out that proper firing rule is the critical factor that affects the oil-drop glaze decorating effect. At the same time, other technological factors, for example, the thickness of glaze layer, glazing method, the size of glaze particle, which can affect the quality of glaze surface, must be considered.

晶体的适当熔解促使油滴形状圆整、尺寸大小适中，并在晶体表面形成一层玻璃相，有利于釉面光泽度的提高；通过正交试验方法探讨了油滴釉合理的化学组成范围，并突破了传统油滴釉制品及目前大多数仿制品采用单一特定天然釉土配料的局限，试验证明，只要化学组成合理，工艺控制适当，使用普通制瓷原料生产油滴釉制品是完全可行的；此外，本研究还发现，合理的烧成工艺控制是影响油滴釉装饰效果的关键性因素，同时还应注意釉层厚度、施釉方法、釉料研磨细度等其他工艺条件对釉面质量的影响。

Methods Soil was air-dried, grinded, and screened through 100 mesh sieve. Appropriate sample was put in porcelain crucible with 0.5 g Aldrin reagents, and another 2 g Aldrin was used to cover the sample. Then the mixture was burned, cooled off, lixiviated by water, and determined by arsenic-cerium redox spectrophotometry.

土壤经自然风干，粉碎过100目筛，取适量试样于盛有0.5g艾氏试剂的瓷钳埚中，再取2g艾氏试剂覆盖试样，置高温炉中灼烧，冷却，水浸提，砷铈氧化还原分光光度法测定碘含量。

B. Overglazed means the white porcelain is marked with decorating pattern with overglazed color material before fired in the kiln.

釉上彩意味着用釉上彩颜料在白胎瓷的的表面绘上装饰图案，然后再放入炉中烤。

In this article,we discussed the methods of Plasticizing of bone china mud in as pects of the raw materials,the processes of mud making especially in the plasticizer.

从坯料配方、泥料制备工艺，特别是增塑剂的选择和应用方面论述了对骨灰瓷泥料增塑的途径。

Travertine Backsplash, New 16x16 Porcelain Flooring and refinished Cabinets.

石灰，新16x16瓷地板和抛光柜。

The procedure of firing/repolishing when fabricate PFM prosthetics might affect the surface compositions and microstructure in some extent.

临床烤瓷修复体制作过程能够影响合金的表面组分和微观结构，但改变较小。

According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.

曝气设备的动力效率在叶轮转速为120rpm～150rpm时取得最大值，此时氧利用率和充氧能力也具有较高值。

The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.

稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世，形体几无变化。