球形

Fruit a pome, ovoid to subglobose, fleshy, with persistent sepals; carpel crustaceous; locules abaxially loculicidally dehiscent; seeds oblong, compressed, testa leathery; cotyledons nearly flat.

果一梨果，卵形到近球形，肉质，具宿存萼片；心皮壳质；子房室背面的室背开裂；种子长圆形，压扁，革质；子叶差不多平。

Leaf blade ovate to suborbicular, apex obtuse, shortly acuminate, or cuspidate; achene broadly ovoid or subglobose, purplish spots or verrucose.

叶片卵形到近圆形，先端钝，短渐尖，或骤尖；瘦果宽卵形或近球形，略带紫色的点或瘤状。

The growth inhibiting rate of T24 cell lines were detected by MTT methods, apoptosis of cells were detected by flow cytometry, the mechanism of apoptosis was analyzed by detecting the protein expression of Bcl-2, Bax, Caspase-9, Caspase-3 and cytoplastic protein Cytochrome C. 4 We injected live T24 cells into the subcutaneous space of nude mice and successfully built up the animal model of bladder carcinoma. The effect of CS-PAA-EPI polymer magnetic microspheres targeting chemotherapy was investigated by HE staining, TUNEL ,tumor weight and volume inhibition rate. Results: 1 TEM revealed that the CS-PAA polymer magnetic microspheres were regular spherical shape,the average diameter was 80nm in dry condition. By controlling the pH value of the medium,polymers had positive or negative zeta potential. VSM showed the CS-PAA polymer magnetic microspheres had superparamagnetic. The diameter of CS-PAA-EPI polymer magnetic microspheres were 200nm in solution by DLS examining,the embedding ratio was 20%,the EPI loading rate was 15%, which was higer than reported in other articles. 2 Raw eye observation found that the rat"s bladder of treatment group was brown color,which meaned the aggregation of iron particles, compared with the control group, iron stain found iron particles were assembled in rat"s bladder of the treatment group, the amount of iron particles in liver and spleen were less obviously.

研究结果：1合成的CS-PAA磁性聚合物微球呈球形，大小均一，TEM测定其干态下粒径为80nm左右，磁化曲线证实具有超顺磁性，具有一定的PH敏感性，固载表柔比星后，水溶液性状稳定，无沉淀物，DLS测定直径约200nm左右，测定载药率为15％，较文献报道高，包封率为20％。2肉眼观察试验组大鼠膀胱表面呈褐色，可见大量的Fe粒子聚集，普鲁士兰染色法显示，试验组大鼠膀胱壁内有大量的Fe粒子，分布至膀胱壁全层，与对照组大鼠相比，试验组大鼠的肝、脾内的Fe粒子聚集量明显降低；HPLC测定结果与Fe染色相同；高剂量磁性CS-PAA-EPI生理盐水组及单纯EPI生理盐水组均在给药后14天出现血肌酐和尿素氮的升高，其他组大鼠血生化指标没有明显变化。3MTT法发现，高、中、低剂量磁性CS-PAA-EPI生理盐水组在外加磁场的协同作用下杀伤T24细胞效应明显高于单纯的EPI生理盐水组，FCM发现试验药物组可引起明显的肿瘤细胞凋亡，试验药物治疗组细胞胞浆内出现了由线粒体释放出的细胞色素C，试验组细胞Bcl-2蛋白减少，Bax蛋白变化不明显，Caspase-3、Caspase-9蛋白受到了激活活化。4高、中、低剂量磁性CS-PAA-EPI生理盐水组的瘤重抑制率和瘤体积抑制率均明显高于单纯的EPI生理盐水组(P＜0.01)，其中高剂量组的抑制率最高。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area;2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support;3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier;4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling;5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene PolymerizationIn this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that:1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS;2.co-mlling time had no obvious effect on the texture of support after 12 hours;3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现；3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布；4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒；5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明：1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致；2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响；3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

Dealcoholization temperature markedly influences the surface area and porosity of the resultant MAO-supports. When the support was pretreated at lower or higher temperature, the corresponding MAO-support shows very low surface area; 2.XRD and IR analyses indicate that MAO has reacted with the residual ethanol in the supports, which is an important manner to get MAO fixed on the carrier. Morever, XPS analyse indicates that MAO can also be coordinated with MgCl_2, which is another way to get MAO fixed on the support; 3.ICP and EDX analyses indicate that dealcoholization temperature not only determined the element content on the solid catalyst, but also influences the element distribution on the carrier; 4.The activities of the supported phenoxy-imine catalysts and the properties of resultant polymers are strongly dependent on the dealcoholization temperature. The support (MSP-5) obtained by treating MgCl_2·2.56C_2H_5OH at 160℃for 4 h, then modified by MAO is very effective for immobilizing complex 3, the resultant solid catalyst (MSPC-5) shows very high activity in ethylene polymerization, and its kinetics of polymerization is stable during the reaction process. Finally, PEs with spherical morphology and high bulk density (over 0.35g/ml) were obtained, without reactor fouling; 5.In this work, polymerization conditions such as alkylaluminums, Al/Zr ratio, temperature and H_2 had a pronounced effect on the activity of MSPC-5 and properties of PE;(3). New MgCl_2-Supported Single-Site Catalysts for Ethylene Polymerization In this work, a kind of new MgCl_2 support was obtained by anhydrous MgCl_2 co-milled with solid MAO, and it is a creative contribution. Then some single-site catalysts were supported on the new MgCl_2 support, and the resulted solid catalysts were tested in ethylene polymerization, the results indicated that: 1.XRD and IR analyses indicate that MAO does be coordinated with MgCl_2, which is in good agreement with the results obtained by XPS; 2.co-mlling time had no obvious effect on the texture of support after 12 hours; 3.In this work, MgCl_2 was co-milled with solid MAO for different hours, and then complex 3 was supported on these co-milled supports. It was found that co-milling time markedly influences the activity of solid catalysts, but it had negligible effect on the kinetic profile and the properties of resultant PE.

XPS研究结果表明，MAO不仅仅只和乙醇作用，MAO还与MgCl_2本身有一定的作用，这是一个极为重要的发现； 3、通过ICP和EDX表征，发现载体的脱醇温度直接影响着元素在固体催化剂中的含量及分布； 4、脱醇温度极大地影响着负载苯氧基亚胺类催化剂的活性和聚合物的性能，特别是原始载体经160℃活化4小时制备得到的固体催化剂MSPC-5的活性明显高于其他脱醇温度条件下制得的固体催化，并且催化剂寿命长，表现出稳定的动力学行为，最终获得了高堆密度(大于0.35g／ml)的球形聚乙烯颗粒； 5、本文选择MSPC-5为研究对象，考察了聚合反应参数对催化剂的活性及其聚合物的影响，研究发现：不同的烷基铝对催化剂具有非常重要的影响，特别足TIBA对MSPC-5的助催化活性最高，烷基铝的加入量有一个较佳值，聚合温度为80度时活性最高，H_2的加入使催化剂的活性明显降低且聚合物的分子量也减小；、新型氯化镁载体负载单活性中心催化剂催化乙烯聚合本文创造性采用固体MAO与无水氯化镁直接进行共研磨，制备出了一种的新型的氯化镁载体，并将该载体用于多种单活性中心催化剂的负载化研究，研究表明： 1、通过BET、XRD的表征，再次证实了MAO与MgCl_2之间具有直接作用，与XPS的研究结果相一致； 2、当研磨时间高于12小时时，延长研磨时间对载体的结构没有显著的影响； 3、将配合物3负载于共研磨时间不同的一系列载体上，乙烯聚合结果表明，尽管共研磨时间对负载催化剂的活性具有明显的影响，但是它对聚合物的性能以及催化剂的影响不明显。

The rising and deformation of two identical spherical and deformational bubbles moving side by side or in a line in a viscous fluid is studied numerically. The interaction between two bubbles with a wide range of Reynolds number and separation distance is studied.

4对水平和上下放置的球形气泡和变形较大的两个气泡在浮力作用下的上升及变形过程进行了模拟，分析了气泡间距与Re数之间的关系，揭示了气泡融合过程中上升速度的降低与反弹现象。

Stamens 4, parallel, anterior 2 slightly longer; anthers ovoid, cells 2, transversely dehiscent, parallel.

雄蕊4，平行，前面的2稍长；花药卵球形，室，横向开裂，平行。

From the temperature (612℃) slightly under its liquidus, the nucleation number was most in the melt, the primary grains were fine and global, the number of grains per area was more, and the optimum holding time was near 30min at 612℃. From the temperature (600℃) below its liquidus, the nucleation number was more, but some nucleuses congregated and grew dendritically.

其中 ，液相线铸造法〔4〕是我们开发的一种新的制浆方法，该法使金属熔体在液相线温度附近保温一段时间并形核，然后浇铸成具有细小球形组织的适合半固态成形的铸坯。

External surface,activity and mechanical strength of the catalyst were enhanced by increasing proportion of large pores and adopting the shape of dentiform sphere.

通过对载体的改性，提高了大孔所占比例，将催化剂外形改为齿球形，增大了催化剂的外表面积，提高了催化剂的活性和机械强度。

Fertile stamens 3, in a few flowers only anterior 2 fertile, posterior 1 depauperate or absent, often anterior 2 also depauperate; filaments densely white lanate; staminodes 3; antherodes 3-sect. Capsule ovoid, 1.5--1.7 cm, acute at apex.

能育雄蕊3，在数花内只前面的2枚能育，后面1发育不全或无，通常前面2也发育不全；花丝浓密的白色绵状毛；退化雄蕊3；退化花药 3全裂；蒴果卵球形，1.5-1.7厘米，锐尖的在先端。

She gently rebuff ed him, but agreed that they could be friends

她婉言拒绝了，但同意作为朋友相处。

If in the penal farm, you were sure to be criticized.

要是在劳改农场，你等着挨绳子吧！