特性态

In atomic vapor laser isotope separation, the metal is heated and melted by electron beam, and some atoms are on the metastable states. In order to analyse the influence of metastable states' deexcitation on vapor physical parameters, such as velocity, temperature, direct simulation Monte Carlo method is used to simulate the 2 D gadolinium evaporation from long and narrow crucible.

在原子法激光同位素分离工程中，金属受电子束的加热而熔化，有一部分原子处于亚稳态能级，为了分析在蒸发过程中亚稳态原子退激对原子蒸气的速度、温度等物理特性的影响，采用直接模拟蒙特卡罗法模拟钆原子蒸发过程，分析亚稳态原子退激过程对蒸气特性的影响。

In addition, some modifications on several computational methods are also presented. Using LMTO method the electronic structure of several systems are studied, and some results are obtained. They are: The ideal Nb (100) surface has three surface states, the multi-layer relaxed surface has two surface states. The surface energy of the ideal surface is higher than that of the relaxed surface, that means that the multi-layer relaxed surface is more stable than the former one, which supports the LEED results. The mono-layer relaxed Ag (111) surface is the most stable one among several" stable surface models"presented by several researchers. The surface energy of Ag (111) surface is higher than that of surface Ag (001), which supports some experimental results such as different reaction rate at different surface orientations for the same material. The surafce states of Si (111) surface not only locate near the Fermi level, but also in the valence band, which agrees well with Cohen's conclusion. Si (111)-H is an effective model for analysing the surface states and H adsorbed on the back surface is a good method for improving the convincingness of the results obtained on thinner slab models. The surface stability depends on three different kinds of MoSi〓(001) surfaces, the surface with mono-layer Si is the most stable one, and the surface with Mo at the first layer is the most unstable one among them. These are consistant with the Kemoda's experimental results. The valence bands of clean or K adsorbed CdTe (111) surface agrees well with the synchrotron radiation studies. The surface of CdTe (111) consists of four kinds of surface models which show different surface electronic structures and different surface structure stabilities. The conclusion agrees well with Wu's experimental work. The different absorbed alkali metals on the CdTe (111) surface give different adsorption characteristics which have relations not only with the valence electrons, but also with the core ones of the alkali metals. The electonic structures of Si-C alloys are different from that of Si-Ge alloys, and the energy band gaps of Si-C alloys do not increase linearly with Carbon concentration, our conclusion supports Alexander's results, but conflicts with Soref's one.

现分述如下： LMTO方法及其应用方面：1）通过对Nb（100）表面电子态分析发现清洁理想表面有三个表面态，多层弛豫表面有两个表面态；表面能大小说明多层弛豫表面更稳定，支持了LEED结果。2）通过对采用不同方法获得的几种不同Ag（111）表面稳定结构的表面能计算分析，给出了单层弛豫表面为Ag（111）表面的最稳定结构；从Ag（111）单层弛豫表面和Ag（001）表面的表面能比较，发现了Ag（001）表面表面能要比Ag（111）小的，表明了同种物质不同表面取向将表现出不同物理、化学性质，这是与实验中得出的结论是吻合的，3）通过对Si（111）表面态分析，不仅发现了Si（111）表面不仅具有居于费米能级附近的悬挂键所对应的表面态，而且还有很多表面态位于价带能量范围内，与Cohen等结果一致，H饱和slab模型背表面相当于增加了slab层的厚度，是一有效的变相增加slab层厚的方法，弛豫表面较清洁理想表面价带谱们低能端的少许移动，预示着总能降低，说明弛豫表面较清洁理想表面稳定。4）MoSi〓具有三种表面，从费米能级上态密度值大小得到单层Si表面最稳定，Mo原子为表层原子的表面最不稳定，双层Si原子表面居中的结论，这与Kemoda等人实验结果是一致的。5）通过对CdTe（111）表面表面电子态、表面结构稳定性及表面H、碱金属吸附的电子结构系列研究，不仅得出了CdTe（111）清洁及碱金属K吸附价带谱与同步辐射光电子谱相吻合的结果，而且发现了CdTe（111）表面具有四类不同原子近邻特征，表现出四类不同的表面结构及电子结构特征：不同表面态分布、不同的表面结构稳定性（表层原子与次层原子成三键有一悬挂键的表面要比表层原子与次层原子成一键有三悬挂键稳定（与Wu等人实验结果一致））、不同的H吸附特性。

In this paper,results of Markov chain are used under the circumstances of the automaton model which belongs to logical level of Discrete Event System to analyze the steady states and transient states of the Markov model of DES,respectively based on four conditions of discrete-time parameter and continuous-time parameter.A simpler decision rule of system ergodic property which applies both to the conditions of discrete-time parameter and continuous-time parameter is presented through an example.The transient states of DES which under the condition of continuous-time parameter are analyzed and computed based on Kolmogorov backward equation or forward equation.

利用马尔科夫链的结果，在离散事件系统逻辑层次的自动机模型基础上，对DES的Markov模型的稳态和暂态特性，分别从时间参数连续和离散的情况下，分四个情况进行了分析，通过实例对系统遍历性提出了一条更简单的且在连续和离散时间参数情况下都通用的判定规则，并利用Kolmogorov向后或向前方程，对连续时间参数DES的暂态特性进行了分析和计算。

In this topic, the dynamic analysis methods for piezoelectric vibrator are studied systematically based on the theoretical model, FEM numerical experimentation and FEM governing equation for given compound-mode vibrator, and some valuable conclusions are obtained. The main work accomplished is summarized as follows: 1.Elaborate the main modeling methods for piezoelectric vibrator and the significance and necessity to study the dynamic characteristics of piezoelectric vibrator which emphasize the urgency of this paper. 2.Take the bending deformation induced by piezoelectric ceramic as example, the energy transfer mechanism of electric energy to mechanical energy are analyzed; the motion and force transfer mechanism are analyzed for the longitudinal-bending vibrator. 3.Based on mode assumption and Hamilton principle, the coupling model of piezoelectric vibrator of linear USM is built; moreover, the equivalent circuit model is obtained and a coupling equation represents the relation between electric parameters and mechanical parameters is derived which provides foundation to match the vibrator and driving circuit. 4.Combine the constitutive equation of piezoelectric ceramic with elastic-dynamical equation, geometric equation in force field and the Maxwell equation in electric field and the corresponding boundary condition equation, the FEM control equation for piezoelectric vibrator of USM to solve dynamic electro-mechanical coupling field is established by employing the principle of virtual displacement. The equation lays the foundation to study the non-linear constitutive equation of piezoelectric ceramic driven by high-power. 5.Define the dynamic indexes of characteristic of vibrator and carry out variable parameters simulation by calculating the model parameters and the electric characteristics of vibrator are simulated according to the equivalent circuit model. By numerical experimentation, the working mode of vibration of vibrator and the shock excitation results of the working frequency band which provides the mode frequency to realize bimodal are analyzed. Detailed calculation of the electro-mechanical coupling field parameters is made by programming the FEM control equation.

本课题从理论模型、有限元数值试验、有限元控制模型等方面以复合振动模式振子为例对超声电机压电振子的动力学特性及其分析方法进行了全面系统地研究，得出了许多有价值的结论，主要概括如下： 1、阐述了目前针对超声电机压电振子的主要建模方法，对压电振子动态特性的研究意义和必要性进行了论述，突出了本文研究内容的迫切性； 2、以压电陶瓷诱发弹性体发生弯曲变形为例，分析了压电陶瓷通过诱发应变来实现机电能量转换的机理；对基于纵弯模式的压电振子的运动及动力传递机理进行了分析； 3、基于模态假定，利用分析动力学的Hamilton原理，建立了面向直线超声电机压电振子的机电耦合动力学模型，并据此建立了压电振子的等效电路模型，导出了电参量与动力学特性参量的耦合方程，为压电振子与驱动电路的匹配提供了依据； 4、从压电陶瓷的本构方程出发，综合力场的弹性动力学方程、几何方程、电场的麦克斯韦方程以及相应的边界条件方程，采用虚位移原理，建立了压电振子动态问题机电耦合场求解的有限元控制方程，为研究其大功率驱动下的非线性本构模型奠定了基础； 5、界定压电振子的动力学特性指标，对压电振子的机电耦合动力学模型参数进行计算及变参数仿真；依据等效电路模型，对压电振子的电学特性进行了仿真分析；通过有限元数值实验，对压电振子工作模态附近的模态振型及工作频率附近的频段进行了激振效果分析，找出了实现模态简并的激振频率；利用有限元控制方程，通过编程计算，对压电振子的力电耦合场参数进行了详细计算，得出了一些有价值的结论。

A computer-aided local transient flow property measuring system was developed using a high speed CCD camera coupled with optical fibers in order to study the Gas-liquid-solid three-phase jet loop reactors. SnO2 crystal films were orientally deposited on the alkoxysilane molecule-coated hydroxyl glass substrates so as to prepare surface-marked particles as the tracers. An image analysis system was established to identify different phases. Stroboscopic photography was utilized to extend the measure range. The developed measuring and analysis system was capable of determining accurately the local transient flow property in a G-L-S jet loop reactor. Based on the above system, local transient flow properties of gas, liquid, and solid phase were measured and studied the influences of fluid property, operation and configuration parameters on the reactor.

以气液固三相喷射环流反应器为研究对象，将高速CCD和光纤束耦合制成局部瞬态流动特性微机数据采集及图象处理系统，利用MPS硅烷分子在带有羟基的玻璃基底上的自组装引导SnO2晶态膜层在功能化表面上进行沉积，以获得表面标记的示踪粒子，解决图象处理技术与相的识别的问题，利用频闪技术拓展了测量上限，得到可以准确测定气液固三相喷射环流反应器中局部瞬态流动特性的测试系统；采用上述测试技术进行喷射环流反应器中局部气相、液相与固相瞬态流动特性的实验研究，并考察物性参数、操作参数与结构参数的影响规律。

In chapter 1, an up to now synthetically evaluation is given on the research ways and conclusions about jet in cross-flow. Considering the shortage of previous research ways and techniques (the instantaneous flow field and vortices field can not be properly get), in addition to the deficiency of corresponding conclusion (mainly concentrate on the analysis of time-average but little on structures of flow and action of vortex), the research way and content is draft out in this part. Though PIV, the time-average, instantaneous flow field and vortices field can be get, that will unveil the coherent vortex and its course of generation, development and evolvement, with the assistance of K-ε model and Hybrid Finite Analytic Method , which will proof-test the experiment result and bring some complementary, more profound research about the 3-D characters can be done. Using some fundamental topological theory and principle on flow analysis, with anglicizing of vortex structure, a reasonable description is the topological characteristic of near field in JICF given.

首先在第一章中对横流中湍射流的以往研究方法和研究成果给予了综合的评述，针对横流中湍射流旋涡结构以往研究中研究方法的局限性（不能很好得到流动的瞬态流场及涡量场）和相应研究成果中存在的不足（大都集中在时均特性的分析，对流动的内部结构和旋涡的运动阐述很少），明确了本文的研究方法和研究内容：通过PIV流动测量显示技术得到流动的时均及瞬态流场、涡量场，来揭示横流中湍射流的时均、瞬态流场、涡量分布特性，和各种具有拟序结构性质的复杂涡系的产生、发展及演化过程；结合湍流k-ε双方程模型及相应的HFAM计算方法，对于实验进行相互验证和补充，从而更为充分地研究各种旋涡的三维特性；利用拓扑分析的一些基本原理及相关规则，依据对各种旋涡结构的分析，做出对射流近区流场拓扑性质的合理描述。

In this thesis, firstly, some main models have been checked on their accuracy, and the reliability of MACORS code has been verified by the RELAP5/MOD2 code on five transient conditions for QSNP: loss of flow; loss of offsite power; incontrollable control rod withdrawal; the feed-water temperature increasing and the feed-water lost. The results obtained are very satisfactory. Secondly, MACORS is used to calculate the operating and accident transients for QSNP, and the analysis results are significant to real engineering. And finally for MNRS, MACORS is used to simulate the steady-state natural circulation heat-removed capacity and the transient behaviors from forced circulation to natural circulation. Some important conclusions are obtained by the analysis results.

本论文首先从各方面对核动力系统中最主要的、热工水力特性最复杂的反应堆和蒸汽发生器进行单独验证和理论分析，其次分别利用RELAP5/MOD2程序和MACORS程序对秦山核电站的双环路失流、全厂断电、反应性事故引入、主给水参数变化及丧失主给水五种瞬态工况进行了计算，结果符合很好，从而证明了本程序模型的准确合理性，选择数值方法的有效性和编制程序的正确性；尔后，利用MACORS程序对秦山核电站的多种运行及事故瞬态进行了分析，得出了具有工程价值的结论；对船用核动力装置的稳态自然循环载热能力以及相应参数的特性、强迫循环与自然循环的过渡工况等进行了仿真分析，所得结论对我国核动力船舶的设计，运行以及安全审评具有重要的意义。

The results show three outstanding characters: these two stock markets are closely correlated; the overall day return doesn\'t follow the normal distribution, but it is characterized with leptokurtic and fat tail; the security market return has stable characteristics and multi-fractal characteristics which shown as the long memory, fat tail, scale properties, and variability.

发现上海和深圳两个证券市场的关联程度非常大；中国证券市场中的总体日收益率分布不服从正态分布，而是呈&尖峰态&，并且具有&厚尾&的特征；证券市场收益序列呈现稳态特征与多标度分形特性，表现为长期记忆特性、厚尾特性、标度特性和易变性。

A computer-aided local transient flow property measuring system was developed using a high speed CCD camera coupled with optical fibers in order to study the Gas-liquid-solid three-phase jet loop reactors. SnO2 crystal films were orientally deposited on the alkoxysilane molecule-coated hydroxyl glass substrates so as to prepare surface-marked particles as the tracers. An image analysis system was established to identify different phases. Stroboscopic photography was utilized to extend the measure range. The developed measuring and analysis system was capable of determining accurately the local transient flow property in a G-L-S jet loop reactor. Based on the above system, local transient flow properties of gas, liquid, and solid phase were measured and studied the influences of fluid property, operation and configuration parameters on the reactor.

中文摘要：以气液固三相喷射环流反应器为研究对象，将高速CCD和光纤束耦合制成局部瞬态流动特性微机数据采集及图象处理系统，利用MPS硅烷分子在带有羟基的玻璃基底上的自组装引导SnO2晶态膜层在功能化表面上进行沉积，以获得表面标记的示踪粒子，解决图象处理技术与相的识别的问题，利用频闪技术拓展了测量上限，得到可以准确测定气液固三相喷射环流反应器中局部瞬态流动特性的测试系统；采用上述测试技术进行喷射环流反应器中局部气相、液相与固相瞬态流动特性的实验研究，并考察物性参数、操作参数与结构参数的影响规律。

The intensity-dependent interaction of the different states:the superposition of thebinomial states,generalized binomial states,hypergeometric states,Polya states,negative binomialstates,the superpositions of the negative binomial states,Glauber-Laehs states,displaced binomialstates and displaced negative binomial states with two-level atoms are studied and the dynamicsof the atomic population inversion and the field second-order correlation function areinvestigated.

对各种量子态：二项式叠加态，广义二项式态，超几何态，玻利亚态，负二项式态，负二项式叠加态，Glauber-Lach态，位移二项式态，位移负二项式态与二能级原子在强度耦合情况下的相互作用中原子与光场的动力学特性做了仔细的研究。

In the United States, chronic alcoholism and hepatitis C are the most common ones.

在美国，慢性酒精中毒，肝炎是最常见的。

If you have any questions, you can contact me anytime.

如果有任何问题，你可以随时联系我。