特征参数

The common method, that all strong-correlation terms of the model are eliminated, can bring the loss in the engineering application, so the new method is proposed that the identified model reserves some correlation. The augmented matrix A is constructed by the outputΔW and the matrix S. The"determinating order based on ratio of determinant"is brought out to screen the strong-correlation terms in the structure identification. The latent root estimation is improved in screening the eigenvalues and eigenvectors. Thus the estimation precision is improved greatly.The consistence check of guidance instrument error coefficients of flight test and ground test is the purpose of flight experiment. The causes of inconsistency of the two models are analyzed. The hypothesis test of linear regression model based on F statistics is proposed to check the consistence.Finally, the instability of error coefficients is probably caused by the change of the flight environments, therefore, the relation between the error coefficients and flight environment is analyzed. The approach is presented to identify SINS guidance instrument error models and compensate the error in the segmented sections corresponding to the change of vertical acceleration of aircraft.

在结构辨识中，常用的方法由于将模型中的强相关项全部剔除而给工程应用带来损失，因此，本文提出了新的有益思想，即在保留一定相关性的基础上进行辨识：将输出向量ΔW与环境函数矩阵S构成增广矩阵A，然后采用"比定阶行列式"来剔除相关向量的方法，这样既可以尽可能多地保留了对落点影响大的强相关参数，又可以对落点影响小的强相关参数给予剔除；在参数估计中，改进了特征根估计中特征根和特征向量的筛选方法，提出"近零"准则，从而大大提高了参数估计的精度；再者，鉴于天地模型"一致性"检验是飞行试验和SINS制导工具误差系数分离的主要目的，因此，本文又深入分析了造成天地模型不一致的原因，提出了采用基于F统计的线性回归模型假设检验方法来进行捷联制导工具误差模型的天地"一致性"检验；最后，鉴于飞行环境剧烈变化可能会对惯性仪表误差系数稳定性带来一定的影响，因此本文深入地分析了SINS制导工具误差系数与外界环境的关系，提出了基于过载变化大小的分段辨识和分段实时补偿的算法。

A theoretical model is built to investigate the simulation of the infrared characteristic of the metal structure with the PCM false target.Structure parameters of the PCM false target that suit for the simulation are investigated numerically.According to the results,further request on the improvement of the thermal conductivity of PCM is presented.An experimental platform is built and the numerical model is validated experimentally.Three key thermal characteristic components of the false tank(barbette,wheel and front armor plate) are manufactured and tested,and good results are obtained.A method for the thermal conductivity enhancing of PCM by using aluminum fins is studied,the influence of the structure parameters of PCM plates to the simulation effects are investigated numerically,and the reasonable configuration parameters of the PCM plates used to simulate the steel plates of different thickness are obtained.In the study of the application of heat convection method in IR false target,a passive infrared simulation system is designed to simulate the infrared characteristic of metal constructions.The system is made up of pipe-plate,pump,receiver,and working fluid.

在相变材料应用于红外示假的研究中，通过数值模拟，研究确定了适用于制作假目标的相变材料各物性参数的范围，分析了相变材料制作假目标的可行性，并根据所得结果，选取石蜡为研究对象，建立了相变材料模拟金属构件红外特征的理论模型，研究了适用于模拟各金属构件红外特征的相变材料假目标的相关结构参数，得出了相变材料假目标模拟各金属构件红外特征的理论结果，并对相变材料的导热系数这一物性提出了进一步的改进要求；搭建了假目标实验平台，验证了所建理论模型的准确性；以坦克假目标为研究对象，制作了炮塔、负重轮和前上装甲板三个坦克假目标的关键红外热特征部件，并进行了野外实验，取得了较好的结果；以添加铝肋片作为改进相变材料导热能力的手段，理论研究了此类导热增强型相变材料的相关结构参数对模拟效果的影响，得出了模拟不同厚度钢板红外特征的导热增强型相变材料的结构参数及模拟效果。

Based on investigating the short and intermittent structural plane, surrounding rockmass of the huge underground powerhouse in Three Gorge has been divided into five statistical similar areas according to its characteristic of rockmass structure by applying structure plane network simulation. Distributed characteristic of structural plane has been studied and based on it mechanics macrocharacteristic has been studied:(1) It is the first time that based on the result of structural plane network simulation rockmass quality of every structure area has been studied with applying blurred information optimum seeking technique and be compared with and RQD method. The result indicated that it has better effect to evaluate rock quality with blurred information optimum seeking technique.(2) It is the first time that the interrelated relationship of the result of in-suit rockmass deformation test and fractal characteristic of structure on test point has been applied to determine rockmass deformation parameter. The question of evaluating deformation parameters of engineering rockmass has been solved.(3) Anisotropy strength parameters have been determined by applying shear zones simulating method. The result indicated that there are different strength parameters in every structural area, after comparing the result of Fast Lagranian Analysis in continua number simulation method with that of method of weighted mean according to continuity. The result indicated that when a suitable reduction coefficient is been considered rockmass strength parameters can be simply and fast determined with method of weighted mean according to continuity where there is not enough test result.(4) Damage characteristic has been studied based on analysis fractal characteristic of structural plane network by applying fractal-damage coupling method. It is the first time that the concept of damage degree has been set up to evaluate rockmass quality according to the biggest principal damage.

通过对短小、断续性结构面统计特征的研究，将地下厂房区划分为五个岩体结构统计均质区，应用结构面网络模拟技术研究了各个岩体结构均质区结构面的发育分布特征，并以此为基础对岩体宏观力学特性进行了深入研究：(1)首次通过在结构面网络模拟计算结果的基础上，应用模糊信息优化技术研究了厂房区各个岩体结构分区的岩体质量并与岩体基本质量指标研究法、岩体质量指标RQD值研究法作了对比，结果表明以结构面网络模拟结果为基础，应用模糊信息优化技术进行岩体质量评价能够取得很好的效果，解决了工程岩体质量的定量评价问题；(2)首次通过对已有的现场大型岩体变形试验结果的分析及相应试验点岩体结构分形特征的研究，建立了结构面分布的分形维数和岩体变形指标间的相关关系，并首次应用这种相关关系根据结构面网络模拟及分形维数计算结果确定了缺少试验结果的地下厂房各工程部位的岩体变形指标而且应用于围岩稳定性计算，解决了工程岩体宏观变形参数的评价问题；(3)应用在结构面模拟网络图上模拟岩体剪切破坏带的方法，得出了岩体在不同方向上的强度参数，结果表明岩体的强度特性与结构面的发育方向和程度有着明显的关系，各个岩体结构均质区具有不同的强度参数；同时还通过应用拉格朗日差分法对岩体强度指标的数值分析并与按连通率加权平均计算法对比表明，按连通率加权平均计算法在考虑合理的折减系数情况下，可以简单快速地对缺少现场大型试验结果的具体工程部位实现岩体强度指标的估计，通过以上研究解决了工程岩体抗剪强度参数的评价问题；(4)通过结构面网络分形维数的研究，应用分形损伤耦合分析方法，研究了厂房区岩体的损伤特征，并首次引入"损伤度"的概念，建立了应用最大主损伤评价岩体质量的指标体系。

In this paper, searching technology of product information based on knowledge was researched. On the aspect of cognition, we researched the relation between user\'s cognition and designer\'s cognition, explored the knowledge flow in the process of product development, set up a matching model between user\'s knowledge and designer\'s knowledge, brought forward a modeling method based on users\' cognition, and set up a measurable model of product feature; coded and decoded product form element, set up a computer aided product form design system and image evaluating system based on the result of measurement. Accordingly, the product style and product image were systematically discussed, the recognition space of product style and image was constructed, the factors that affect product style and image were put forwards and analyzed, and the relation between product image and form elements was tested by experiments. Furthermore, the product automatic recognition technologies were discussed.And then, with the media of concept model and the kernel of parameter technology, a mathematic model that describing product layout design by constraints and rules was presented. Furthermore, a product design integration system based on imagery thinking including product fonii base system based on imagery thinking, product form design system based on imagery thinking and product form intelligent design system based on space layout were set up, which tested the system and provided a new way for product innovative design.

本文以产品特征描述目标对象——产品，研究一种基于知识的产品信息检索技术，在对产品的认知方面，研究了用户认知和设计师认知之间的关系，研究了产品开发过程中的知识流传递过程，建立了用户知识和设计知识之间的匹配模型，提出了一种基于用户知识的产品建模方法，它不但提取了产品的特征，还建立了产品特征量化模型，从而实现了产品知识的量化描述；对产品造型元素进行分解和编码，利用实验量化结果构造计算机辅助产品形状设计系统和心象评价系统；使用量表分析造型元素的心象尺度，构造输入、输出系统，建立了产品设计知识库咨询系统，可以方便用户和设计师来导入或查询产品设计方案；实现了对产品造型心象的分类知识库系统，便于设计师存储或查询，辅助设计师进行产品创新设计；通过实验量化了产品造型参数和产品心象参数之间的关系，并在此基础上建立了基于心象的产品形状设计系统，为产品空间布局方案智能生成系统奠定基础；在基于知识库的基础上建立了产品空间布局方案智能生成系统，通过更改概念产品造型参数，实现了产品设计方案的智能生成，使系列化的设计工作变得十分方便；将产品的心象运用到实际设计过程中，能够引导流行趋势，创造出产品无形的设计价值。

The topographical parameters have been analyzed by taking into account the thermal effect during the friction process. As the results, three kinds of typical topographical features have been observed for the worn surfaces of C G iron with various P content. Namely, C G iron with 0.05% P, 1.30% P, and 0.70% P show worn surfaces characterized by groove ridge, peak pits and their combined topography. The C G iron specimen with peak pits type worn surface topography showes the lowest wear rate and highest friction coefficient, while that with groove ridge type worn surface topography shows the highest wear rate and lowest friction coefficient. The groove ridge type worn surface has a relatively large value of surface height deviation and void volume ratio and negative large value of skewness, which is contrary to the peak pits topography.

结果表明：度销磨损表面主要呈现犁沟型、孤岛型及二者的混合型3种形貌特征，其中具有孤岛型磨损表面形貌特征的试样的摩擦系数较高，磨损率较低；而具有犁沟型磨损表面形貌特征的试样的摩擦系数最低，磨损率最高，分析表面形貌参数发现：犁沟型表面形貌具有最大的表面高度偏差和表面空隙率及高负值的表面高度分布参数；而孤岛型表面形貌的表面高度偏差和表面空隙率最小，表面高度分布参数为高正值。

Part five discusses 3D model parametric representation, which includes 3D geometry parametrization and relative position relationship parametrization. In the former, the sweeping rules are further formalized, the concept of design parameters and modeling parameters is introduced. In the later, constraint transformation matrices of the position relationships between features are deduced, and the lost of model freedom resulted from the correspending constraint is analysed.

在特征几何参数化中，进一步规范化了特征几何的扫描生成规则，引入了设计参数和造型参数的概念，分析了造型参数向设计参数适时转化的必要性；在相对定位约束参数化中，推导了特征间一般位置约束关系的约束变换矩阵，拓宽了约束表示范围，并对约束的自由度亏损情况进行了分析。

This article that focuses on the systematic and in-depth research in the current primal problem about abnormal burst pressure reservoir depress burst pressure has procured following main fruits:1 It forms the method which could obtain massive vertical static state mechanics parameters.2 In a foundation of acquisition of rock mechanics parameters,apply bent lamella that as mechanical model along with characteristic of actual geologic characteristics to analysis curvature for anticlinal strcture, get homologous tectonic stress value throug relation between the curvature and stress and different principal curvature in anticlinal structure,consequently set up laminational stress model for anticline reservoir. The block lamination for existed fracturing date has formed method of setting up mechanical model of lamination terrestrial stress by abtaining the block tectonic stress coefficients which are got by complex utilization test, laboratory test and fracturing date playback.3 Analysesing the main reason which lead to high burst pressure by considering the characteristic of reservoir geology,reservoir,and rock mechanics and reservoir damage,etc.Establishing burst pressure quantitative prediction model which provide gist for depressing construction risk and optimizing construction craft under the condition of open hole completion ,gun-perforated completion and damaged reservoir.4 Provding theoretical basis for interpreting acidification pretreatment which could depress busrt pressure by finding the relation between the influencing factors and rock machanics parameters and analysing the factors that have effect on rock mechanics parameters. Expounding the mechanism of reaction of mixed monomineral and acid from the angle of microcosmic element, evaluating quantitatively acid sensilility of different kinds of mineral effectively, and determing the first-order reaction dynamical equation of each mineral.5 Revealing rock mechanics property chage as a result of acid flooding in different condition by sandstone traumata experiment in different temperatures which combined with rock mechanics triaxial stress experiment.6 Associating damage mechanics with sandstone acidizing, established sandstone damage mechanics model in the foundation of the recognition on the rock mechanics parametric variation which is caused by acid-rock reaction in both macroscopic view and microscopic view ,also demonstrated those processes and quantitative estimated the acid busrt pressure to direct the site operation.

本文针对目前异常破裂压力储层降低破裂压力的主要问题展开较为系统和深入的研究，取得了以下主要成果：1形成了利用测井资料，结合室内岩芯测试结果，获取静动岩石力学参数的相关性特征，从而获得纵向上大量静态力学参数的方法。2在获取了岩石力学参数的此基础上，利用弯曲薄板作为力学模型，结合区块实际地质特征对背斜构造进行曲率分析，通过曲率与应力的关系，利用背斜构造不同部位的主曲率求得相应的构造应力值，从而建立起背斜储层的分层应力模型；对已有压裂资料的区块分层，形成了综合利用测试、室内实验、压裂资料反演获得该区块构造应力系数，建立起分层地应力的力学模型的方法。3综合考虑储层地质、油藏、岩石力学特性和储层伤害等因素，分析造成高破裂压力的主要原因，综合利用岩石力学、弹性力学等知识，建立了裸眼完井、射孔完井条件下以及储层受到伤害后的储层破裂压力定量预测模型，为降低施工风险和优化施工工艺提供了依据。4完成了物性、岩性影响岩石力学参数的因素分析，找出了各影响因素和岩石力学参数之间的关系，为从机理上解释酸化预处理降低破裂压力提供了理论基础；从微观元素的角度阐述了单矿物与酸反应的机理；并在此基础上，有效评价了各种矿物的酸敏感性，定量确定了岩石中各矿物的一级反应动力学方程。5完成了不同温度下的酸液类型、酸液浓度、注酸量等一系列砂岩损伤实验，结合岩石力学三轴应力实验，系统揭示了在不同条件下注酸而引起的岩石力学性质变化。6将损伤力学与砂岩酸化相结合，在宏观、微观两个方面认识酸岩反应引起岩石力学参数变化基础上，建立了砂岩损伤力学模型，并对其进行验证，在此基础上定量计算酸化后的破裂压力，有效指导现场施工

From the structural and assembly characteristics of hypoid gear main reducer assembly,the way to process characteristic parameters of the vibration acceleration single amplitude domain,time domain and frequency domain of the main reducer housing is studied.

针对汽车准双曲面齿轮主减速器总成的结构及装配工艺特点，研究了主减速器总成壳体振动加速度信号幅域、时域和频域的特征参数处理方法。

Detailed calculation and analysis on differential planetary gear set are performed, and a general method for calculating conversion ratio of PGS is defined.

对差动行星齿轮动力分配装置进行了详细的计算分析，确定了分析计算行星排特征参数p的一般方法。

It is found d can be regarding as characteristic parameter of gene coding region,and d can clearly specify the coding region and non-coding region.

结果表明，用d作编码区的特征参数是可行的，它可以很好地区分编码序列和非编码序列。

According to the clear water experiment, aeration performance of the new equipment is good with high total oxygen transfer coefficient and oxygen utilization ratio.

曝气设备的动力效率在叶轮转速为120rpm～150rpm时取得最大值，此时氧利用率和充氧能力也具有较高值。

The environmental stability of that world - including its crushing pressures and icy darkness - means that some of its most famous inhabitants have survived for eons as evolutionary throwbacks, their bodies undergoing little change.

稳定的海底环境─包括能把人压扁的压力和冰冷的黑暗─意谓海底某些最知名的栖居生物已以演化返祖的样态活了万世，形体几无变化。