熔化

Industrial residue is combined with coke dust to produce granular materials that is transferred to liquation furnace for high - temperature processing after automatic computation and proportioning , and the melt is processed to be fiber by fiber machine , then after containing dust , floatation deslagging, shot separation and modification processing , whitening and dehydration , which the fiber is pressed to inorganic fiber for paper making in vacuum condition and the product is weighed,packaged and put in storage automatically .

工业废渣配焦炭粉造粒料，经自动计量配比后送熔化炉高温处理，熔化液经成纤机加工成纤维，再经集尘，气浮除渣，渣球分离及改性处理后，漂白脱水，真空压榨成造纸用无机纤维产品，自动称量包装入库。

Most of non-equilibrium microstructures in the original microstructure dissolve into the α-Mg matrix due to the diffusion of the solute and then the remainder is melted firstly. The more the increasing of cooling rate or pre-deformation, the more the secondary dendrite arms are easy to coarsen.

原始组织中的非平衡共晶组织在加热过程中大部分扩散溶解而溶入基体中，剩余部分在加热过程中首先熔化；冷却速率越大或预变形处理以后的试样在熔化过程中更容易发生二次枝晶臂之间的合并。

Relationship between the morphology of melting dendrite and the control parameters is established based on the detailed investigations.

详细考察了熔化枝晶的形成条件，并简化地分析了熔化枝晶形态与控制参数之间的关系，结果基本符合；五。

The catheter assembly of claim 35, wherein the first material and the second material have different durometer hardness values.

如权利要求 35 的导管组件，其中第一材料为一种可熔化加工的聚合物，并且第二材料为另一种可熔化加工的聚合物。

Based on detailed analysis of heat transfer of electric arc and scrap melting process, an integrated model was estab-lished.

在详细地分析了电弧传热和废钢熔化过程的基础上，建立了完整的废钢熔化过程数学模型。

The results show that melting point and fusion enthalpy of the fresh nano-aluminium powders are 649.7 ℃ and 3.7 kJ/mol in Ar, respectively, which are 10.3 ℃ and 7.09 kJ/mol lower than those of coarse-grained Al.

研究结果表明：在Ar气流中，新纳米铝粉的熔点为649.7 ℃，熔化焓为3.7 kJ/mol，分别比粗晶铝的熔点(660 ℃)和熔化焓(10.79 kJ/mol)低10.3 ℃和7.09 kJ/mol；在N2气流中，从20 ℃升温到800 ℃时，新纳米铝粉增重约为33%，熔点为648.8 ℃。

About the Calculation of Arc length of the Oriented Smoth Curve or Jordan;2. The experimental results show that the optimum melting voltage is 35～36 V,the reasonable arc length is 25～29 mm.

以海绵钛和中间合金压制的电极经两次熔化得到的TC11合金铸锭为原材料，采用真空自耗电弧炉，在不同的电压下熔炼3次TC11合金铸锭，研究熔化电压、弧长与TC11合金铸锭扒皮深度和扒皮量的关系。

Melting adopted from German Junker 5-ton double furnace double electric supply medium frequency induction furnace, 15-ton double furnace double electric supply medium frequency induction holding furnace, 2sets of 8-ton per hour water cold continuously melting cupola .

熔化采用德国容克公司5吨双炉体双供电中频感应熔炼炉，15吨双炉体双供电中频感应保温炉，两台8吨/小时水冷连续熔化冲天炉；混砂采用德国爱立许砂处理系统，处理能力每小时可达160吨；制芯采用德国兰佩F40数控热芯盒射芯机、F40数控冷芯盒射芯机，适应各种缸盖、缸体、飞轮、排气歧管等制芯。

Due to the high heat concentration all electrically conductive materials will melt and due to the high speed and pressure of the plasma arc the molten material will be blown away forming a very small kerf in the material.

由于高热集中，所有导电的原料将熔化；再由于速度极高及等离子体电弧的压力作用，熔化的原料将被吹掉，从而在原料上形成一个非常小的切口。

The situation of low melting point's explosive being melting because of high temperature ...

模型中考虑了摩擦产生的高温致使低熔点炸药发生熔化的情况，还考虑了熔化引起炸药与金属之间摩擦阻力的变化，即熔化后摩擦系数的变化。

The absorption and distribution of chromium were studied in ryeusing nutrient culture technique and pot experiment.

采用不同浓度K2CrO4(0，0.4，0.8和1.2 mmol/L)的Hoagland营养液处理黑麦幼苗，测定铬在黑麦体内的亚细胞分布、铬化学形态及不同部位的积累。

By analyzing theory foundation of mathematical morphology in the digital image processing, researching morphology arithmetic of the binary Image, discussing two basic forms for the least structure element: dilation and erosion.

通过分析数学形态学在图像中的理论基础，研究二值图像的形态分析算法，探讨最小结构元素的两种基本形态：膨胀和腐蚀；分析了数学形态学复杂算法的基本原理，把数学形态学的部分并行处理理念引入到家实际应用中。