焊的

It can effectively prevent cracking,by analyzing the chemical and mechanical pefformanee of this clad plate,carrying on the non-standard highest hardness test,metallographic analysis and simulation welding test,and using 890 ℃×4 h preweht air-cool heat treatment,postweld 250 ℃×2 h hydrogen removal heat treatment and final 620

通过分析该复合管板的化学成分和机械性能，并进行了非标准的最高硬度试验、金相分析和模拟试焊，采用890℃×4h焊前空冷热处理、焊后250℃×2h消氧热处理以及最终620℃×4h退火热处理措施，可有效防止裂纹产生。

The situation of the light emission from arc welding region is analized in this paper.

本文通过对弧焊区各部分发光情况及光谱辐射情况的分析和研究，提出了选用光谱窗口观察弧焊区的弧焊光谱传感法。

IF2005M, is the basis of the No Residue Technology, is a flux chemistry that completely evaporates during the soldering process eliminating all problems involved with cleaning or rosins IF2005M is one of the first no clean fluxes ever approved according to MIL-F-14256F and has now a real field experience in high sensitive electronic environments for more than 10 years. The performance on pretinned, bare copper and organic coated surface is excellent.

IF2005M免清洗助焊剂，是免清洗技术的经典之作，它是一种在焊接过程中可以完全挥发掉的助焊剂，从而可免除清洗工序，并解决了传统松香型助焊剂所产生的全部问题，IF2005M是首批通过美国军标MIL-F-14256F认证的环保型助焊剂之一，在对环境比较敏感的电子领域已有十几年被应用的历史，实践证明，它在镀锡、裸铜以及有机涂层的表面性能上有极佳的表现

The main results were obtained as follows:(1) The calculation results of temperature field indicate that, 6139T radiator was brazed using the stage-by-stage heating process, while 6204T radiator with a larger size was brazed using the temperature difference heating process. The uniform temperature distributions in faying faces were all obtained. And the temperatures were in the range of brazing temperature. It is proved that the finite element models established are reasonable.

取得的主要结果和结论为：(1)温度场计算结果表明，对于6139T散热器，采用分阶段加热钎焊工艺，而对于具有较大尺寸的6204T散热器，采用温差法加热钎焊工艺时，均获得了均匀的钎焊面温度分布，且在钎焊温度范围之内，证明所建立的有限元分析模型是合理的。

This process is makes the improvement in the original two person two-sided synchronized GTAW process which one time welding two-sides formings, we have carried on a series of welding testing on 8mm SUS304, this new process has be able to decrease weld defects on the tradition two person on both sides synchronized GTAW process, shortenned construction work period, increase welding quality, as well as eliminate tradition two person on both sides synchronized GTAW for SUS304 austenite stainless steel in easy emergence of incomplete joint penetration and porosity.

此工艺是在原有的双人双面同步钨极氩弧焊工艺基础上进行的，即将原有的一次焊双面成形改为两次焊成形，经过在厚度为8 mm的SUS304上进行的一系列焊接工艺试验，验证了这项新工艺既减少了传统工艺中繁琐的工艺过程和焊接工艺缺陷，缩短了施工工期，提高了焊接质量，又消除了传统8 mm SUS304不锈钢双人双面同步钨极氩弧焊过程中易出现的未焊透和咬边现象。

This article has mainly studied one kind improved two person two-sided synchronized GTAW craft for the austenite stainless steel. This craft makes the improvement in the original two person two-sided synchronized GTAW craft foundation which one time welding two-sides formings. A series of welding engineer testing on 8 mm SUS304 were carried on. The new craft could guarantee the welding quality in contrast with the original two person two-sided synchronized GTAW.

主要研究了一种改进了的奥氏体不锈钢的双人双面同步钨极氩弧焊工艺，此工艺是在原有的双人双面同步钨极氩弧焊工艺的基础上进行的改进，即将原有的一次焊双面成形改为两次焊成型，并在厚度为8 mm SUS304上进行了一系列焊接工艺试验，验证了这项新工艺与常规双人TIG双面焊相比，能保证焊接质量。

Effects of arc welding processes,welding parameters as well as chemical compositions and mechanical properties of the base metal on arc efficiency ,melting efficiency and heat input for fusion welding processes are analyzed.

介绍了电弧焊过程热效率的物理含义及熔焊过程热效率的研究概况，比较了不同熔焊过程的热效率，分析了焊接方法、焊接参数及母材成分与性能对熔焊过程的电弧热效率、熔化效率及焊接热输入的影响规律。

The suitability of the different processes was analyzed by observing the weld appearance,studying the microstructure and measuring the mechanical properties of the joint.The results show that a favorable weld can be obtained under the suitable parameters by laser beam welding or tungsten inert gas welding with filler metal.The TIG welded joint has a wider HAZ,and the laser welde...

试验结果表明：在工艺参数合适的条件下，加焊丝TIG焊和激光焊均能获得成形较好的焊接接头；TIG焊接头热影响区较宽，焊缝深宽比小，而激光焊时热影响区不明显，焊缝深宽比大；两种焊接方法所获得的焊缝区组织均为均匀的等轴晶，但激光焊时焊缝组织更细，从而使接头抗拉强度大幅度提高，达到母材的94%左右。

LT-S series machines are widely used in sub-metal factories at home and abroad. It can separate slag generated by welding, metal powder and flux powder when dealing with submerged arc welding flux back and forth.

本机广泛运用于国内外金属结构行业，能分离处理埋弧焊接时焊剂往复使用时产生的焊渣、金属粉末、焊剂粉末。

The influence of Pb-contamination on microstructure and shear strength of SnAg/Cu and SnSb/Cu solder joints prepared by SMT were studied by mixing eutectic SnPb solder paste into leadfree solder pastes.

与常用的Sn62Pb36Ag2焊点对比，Sn96.5Ag3.5和Sn95Sb5焊点在高温时效过程中组织结构更稳定，界面金属间化合物的生长速率和体焊料的粗化程度均低于SnPbAg焊点；同时，焊点的剪切强度较高。

I am accused of being overreligious," she said in her quiet, frank manner,"but that does not prevent me thinking the children very cruel who obstinately commit such suicide.""

客人们在卡罗利娜·埃凯家里，举止就文雅一些，因为卡罗利娜的母亲治家很严厉。

Designed by French fashion house Herm è s, this elegant uniform was manufactured in our home, Hong Kong, and was the first without a hat.

由著名品牌 Herm è s 设计，这件高贵的制服是香港本土制造，是我们第一套不配帽子的制服。