温度系数

Based on the analysis of micro -bolometer resistance -temperature characteristics, a new readout circuit was proposed. It allowed micro -bolometer operate without a temperature stabilizer over a wide range of ambient temperature. And it need a Flash memory to store the correcting factors of different temperatures and a temperature sensor to detect the ambient temperature of the micro -bolometer. By utilizing the factors in the Flash memory, Digital Analog Converter controls the micro -bolometer bias current to compensate the fluctuation of ambient temperature.

通过对微测辐射热计的电阻温度特性的分析，设计了一种新型无需温度稳定装置的读出电路，该电路的Flash存储器存储不同温度下的校正系数，温度传感器实时检测探测器的环境温度，从Flash中取出相应的温度校正系数送入数模转换器，通过DAC的电压输出来控制探测器偏流以进行环境温度补偿。

Thus LES is proved to be suitable to simulate the flow and temperature fields of large scale vortices with complex geometric boundaries. LES cooperated with the second order full extension ETG finite element method is applied to simulate the forced convection heat transfer around two square cylinders arranged side by side. While the boundary conditions are symmetrical, the time history and power spectrums of drag coefficient, lift coefficient, averaged Nusselt number at the wall, and the streamwise velocity and temperature on the symmetrical points are calculated. The results show that the power spectrums are all almost symmetrical.

应用大涡模拟与二阶全展开ETG有限元离散格式相结合的方法对间距比为1.5的条件下横掠并列双方柱强制对流换热问题进行了数值模拟，通过边界条件对称时，对并列双方柱对称点上的速度和温度以及方柱的阻力系数、升力系数和壁面平均Nu数进行的时域分析和频域分析，得到了在对称边界条件下并列双方柱对称点上的速度和温度以及方柱的阻力系数、升力系数和壁面平均Nu数的功率谱均基本对称的结论。

According to actual condition, a model of wall thickness of rotary kiln is established. The constant coefficients in the model, including thermal conductivity, heat transfer coefficient, Fourier coefficient and contact resistance, are closely calculated. A formula of contact resistance is draw from a great deal of data of surface and inner temperature of rotary kiln. The wall thickness of rotary kiln is simulated by MATLAB. The simulation result is transmitted from MATLAB to DELPHI through a group of interface functions compiled by VC++. The basic graphs-circle and line are analyzed by the means of the technique of Visualization in Scientific Computing and the Bresenham arithmetic, and are realized the visualization of the wall thickness. The contents of communication between master computer and slaver computer are designed and the error control technique, the idea of multi-thread and the embedded assembly language are applied to realize the temperature data transmission and graph transmission, which largely improved the speed of transmission and the reliability and stability of system.

建立了符合现场实际的回转窑壁厚数学模型；结合现场采用红外测温仪测量所得的温度数据和回转窑的实际结构数据，确定出适合该模型的定常系数(包括导热系数、换热系数、傅立叶系数、接触热阻等)，并得出与回转窑工况的相近的接触热阻公式ln=T~(0.5154)-36.7868；利用MATLAB软件仿真出回转窑壁厚，并将运算结果通过在VC++的编译环境下编译出MATLAB和DELPHI的接口函数传输到该监测系统中，实现了温度数据的转换和交换；运用科学计算可视化技术和Bresenham扫描转换算法对基本图形——圆和直线进行分析，从而实现了仿真后的壁厚数据可视化；在研究异步串行通信方式的基础上，设计了该系统上下位机功能和通信内容，并运用差错控制技术、多线程思想以及嵌入式汇编语言实现了温度数据和图形数据在上下位机之间的远程传输，提高了数据传输的速率和系统的可靠性、稳定性。

In the temperature sensing, the theory of fiber Bragg grating temperature sensing has first been proposed, the characteristic of the FBG temperature sensing was analyzed, it was deduced that the sensitivity coefficients of first-order and second-order ,and experimental findings was protracted, the gained polynomial better inosculate with the theory value. The experiment was processed in the low temperature , the thermo-optic coefficient was emended in the polynomial of the normal temperature ,the result was accorded with the sensing character of the normal and low temperature ,and it was resolved that the theory account of the normal and low temperature did not accord with the experiment.

在温度传感方面，主要从光纤布拉格光栅的温度传感模式出发，对光纤布拉格光栅的温度传感特性进行了分析，推导出了光纤光栅的一阶与二阶温度灵敏度系数，并对实验数据进行了拟和，所得多项式和理论值吻合的很好，并对低温传感进行了实验，将在常温下得出的多项式进行了热光系数的修正，所得的结果同时符合常温与低温的传感特性，解决了低温与常温情况下的理论计算与实验的不一致性。

The results showed that the environmental temperature and the direction of particle paving were key factors influencing diffusion coefficient.With environmental temperature increasing,the moisture diffusion coefficient enlarge evidently,and the diffusion efficient parrel to the particleboard surface is higher than that verticle to the particleboard surface.

结果表明：环境温度和刨花的铺装方向是影响扩散系数的主要因素，随着环境温度的提高，水分扩散系数明显增大：平行于板面的扩散系数高于垂直板面的扩散系数。

The temperature affects partition of dipotassium glycyrrhizinat but the effect is minor. On the same time pH has major impact on the partition of dipotassium glycyrrhizinat. The coefficient is eight times higher when pH reaches 2. The improved Diamond-Hsu model can be used to correlate the partition coefficient of dipotassium glycyrrhizinat in the system of water/ethanol/isobutanol. The result of Infrared and TG analysis indicate the extraction product has the same characteristic features with dipotassium glycyrrhizinat.

结果表明：体系的初始点越靠近临界点，甘草酸二钾的分配系数越大；温度对甘草酸二钾的分配有～定的影响，但分配系数随温度变化不大；pH值对甘草酸二钾的分配有较大的影响，在pH=2附近，分配系数高出其他位置达8倍；改进的Diamond-Hsu模型可以用于关联甘草酸二钾在水+乙醇+异丁醇体系中的分配系数；红外和TG分析结果表明萃取产物与甘草酸二钾样品的性质特征相同。

In first, a new short time formula of one dimension heat conduction differential equation, based on the theory of one dimension transient method, is presented for thermophysical property measurement of wood. The result of testing on red pine and larch wood arc satisfied by new method.In succession, the relationship between heat conductivity of wood and moisture, density, porosity, temperature and grain is studied experimentally in the range from 25 to 100℃. The result shows that, the heat conductivity is in direct proportion to density. but in inverse proportion to porosity. The heat conductivity of air-dried wood increased probably linear with the temperature rising. And that heat conductivity along the grain of wood is higher than that cross the grain. The former is 1.8 or 2 times of the latter.

文中研究了25～100℃范围内，气干木材的导热系数与含水率、密度、孔隙率、温度及热流方向的关系，研究表明：木材导热系数与密度成正比关系，与孔隙率成反比关系：对于针叶材，导热系数与密度及孔隙率成线性变化关系，而对于阔叶材其变化关系近似成二次曲线；气干木材的导热系数随着温度的升高近似呈线性增加：热流平行于纹理方向的导热系数大于垂直于纹理方向的导热系数，两者的比值大约在1.8～2之间。

Thermal conductivity A of mass and single pellet is successively measured by an efficient and steady heating system, of which the heat source is infrared ray. The milli-volt instrument and thermocouple is a way to measure temperature and its of higher precision and has fewer errors. Thermal diffusivity a is researched based on the study of C and. In this thesis, the volume convective heat-transfer coefficient, is measured on the thin-bed drying plat in terms of the principle of cooling machine and the Boyce drying theory, focusing on the air velocity v or mass flux G affecting on h.

导热系数λ的测定采用红外线纵向热流法，热源稳定、效率高；温度采用毫伏表加热偶温度传感器测量，精度高，误差小，并对成堆物料和单个颗粒均作了研究；基于C和λ的测量结果，导温系数α采用公式法计算而得；对流换热系数h_y为体积对流换热系数，其测定是模拟颗粒饲料的冷却干燥过程，依照冷却器的工作原理，构建颗粒薄层干燥试验台，并在Boyce干燥理论的指导下，重点测试了冷却风速对对流换热系数的影响。

The temperature gradient is larger in case ofussual half-zone model which has a uniform temperature distribution on the hot rod,andmodified half-zone model which has a non-uniform temperature distribution in the hotrod and negative radial temperature gradient near the axis of the hot rod.

模拟半浮区模型提出选择热传导系数与试验液体相当的材料作为热端棒材，使得热端内侧的轴向温度梯度接近于零。模拟半浮区模型的温度分布更接近于全浮区温度分布的一半。对于改型半浮区模型，选择热传导系数高于试验液体值一个数量级的材料作为热端棒材，使得热端温度分布不均匀，并且热端内侧温度高于外侧温度。

The theories proposed by Wilson (1994) were adopted to describe the fundamental behaviors of temperature and variation of suction of soil. The Darcy's law and Pick's law described the flows and evaporation of water respectively. Some proposed assumptions including the characteristic curve of volumetric water content and hydraulic conductivity were only related to the suction of unsaturated soil. The coefficient of latent heat for water was a linear function of temperature; and the heat conductivity was calculated according to the equation proposed by De Vries.

对于土体的温度和吸力变化特征，采用Wilson提出的理论加以描述，在此理论中，分别利用Darcy和Fick定律描述水和蒸汽的流动规律，土水特征曲线和水力传导系数假定仅仅相关于非饱和土吸力，水的潜热系数是温度的线性函数，温度传导系数采用De Vries建议方程加以计算。

The concept of equivalent rotationally rigidity is offered and the formula of rotationally rigidity is obtained.

主要做了如下几个方面的工作：对伸臂位于顶部的单层框架—筒体模型进行分析，提出了等效转动约束的概念和转动约束刚度的表达式。

Male cats normally do not need aftercare with the exception of the night after the anesthetic.

男猫通常不需要善后除了晚上的麻醉。