渗

Major gas carburizing for steel parts used, the use of ultra-lining and the international advanced energy-saving vacuum sealed fan, the furnace pressure to increase without any leakage, temperature uniformity, warming fast, insulation, and an atmosphere of carbon potential uniform workpiece carburizing

主要供钢制零件气体渗碳用，由于采用超节能炉衬和国际先进的真空密封风机，使炉压提高，无任何漏气，炉温均匀、升温快、保温好，碳势气氛均匀，工件渗碳速度加快，渗层均匀，本系列井式气体渗碳电炉大大提高了生产效率和渗碳质量。

Major gas carburizing for steel parts used,the use ultra-l-ining and the international advanced energy-saving vacuum sealed fan,the furnace pressure to increase without any le-akage,temperature uniformity,warming fast,insulation good,and an atmosphere of carbon potential uniform seepage work-piece carbon

主要供钢制零件气体渗碳用，由于采用超节能炉衬和国际先进的真空密封风机，使炉压提高，无任何漏气，炉温均匀、升温快、保温好，碳势气氛均匀，工件渗碳速度加快，渗层均匀，本系列井式气体渗碳电炉大大提高了生产效率和渗碳质量。

The model is used to count several engineering example.Comparing the 2D numerical results with electrical simulations,it is proved that the seepage model can count the seepage surface and the location of search results in dam well and truly.Comparing 3D results with 2D results at close section,the results are tally well except the difference of meshes and the interceptive position of section.So the model is credible and has upper practicality value.In the projects,the spending of account is increasing because of the bigger account field.

将饱和—非饱和渗流模型用于几个工程实例，其二维模拟结果同渗流电模拟实验结果进行了对比，证明本文的渗流模型完全能够准确计算坝内的渗流浸润线以及逸出面位置；三维数值模拟的结果在相近剖面处与二维结果作了比较，考虑三维网格剖分及剖面截取位置的差异，三维结果与二维结果吻合的较好，证明本文的饱和—非饱和渗流模型在三维计算中是可靠的且具有较高的实用价值。

According to the morphological characteristics of cementite lamellae, the deformed pearlite can be divided into three kinds: irregularly bent lamella (pearlite lamella originally inclined with large angles to the rolling plane and irregularly bent after deformation); coarse lamellae with shear-band (the rhomboidal blocks of weakly deformed lamella bounded by shear band) and fine l...

按 渗碳体形态特点，变形珠光体组织可分为以下3种类型：(1)不规则弯曲片层型，即变形后的渗碳体与轧制面呈大角度偏离且不规则弯曲的珠光体。(2)带有剪切带的粗大片层型，即被渗碳体剪切带分开且变形轻微的珠光体。(3)精细片层型，即与轧制方向平行排列、片间距细小且渗碳体严重变形的珠光体。精细片层区域的比例随着轧制压下率的提高而增大。此外，重度冷轧变形还引起渗碳体严重塑性变形和部分溶解。

At the super-low permeable reservior sandstone of Fu and Yang in Daqing Oilfield, many pore throats exist a lot in the types of compacted and restored flakes and curved lamellas while the pore volume of micropore and the thin, compacted and shrunken throat that contribute little to flow take large scale in the total pore space. Thereof high filtrational resistance is caused by much trouble including high content of reservoir shale, serious sensibility to pressure at waterflooding, remarkable effects of undersaturation and water blocks in micropore. A method with laboratory experiment, theoretical confirmation and field application included was adopted to analyze the non-linear flow characteristics, to reveal the deep mechanism of pinhole enveloping macropore and to provide a new technology of improving the development effect. The outcomes aquired are as follows: Multiple cores with different low and super-low permeability were selected to perform seepage experiments by gas, water and oil. Three fields of flow were observed in the reservoir at different low and super-low core permeability. They are pseudo- elastic flow, transition flow and plastic creep flow. So the concept that there was no correlation of rocky absolute permeability with fluid properties that pasted itself was broken up. Two-phase seepage of water displacing oil in uniform super-low permeability shows that the two-phase seepage zone is narrow.

针对大庆油田扶、杨特低渗透油层砂岩孔隙喉道的大小和形态以压实再生型片状、弯片状喉道分布较广，压实、缩小型细喉道型，微孔不可流动的孔隙体积所占总孔隙体积的比例较大的特点；及储层泥质含量高，注水开发中压力敏感性强、微孔隙欠饱和及水锁效应显著，导致流体渗流阻力增大的问题，本文采用室内实验、理论推证和矿场应用相结合的方法，研究、分析了流体非线性渗流特征，更深刻地揭示出小孔包围大孔的机理及产生原因，并提供了改善开发效果的新的技术方法，取得如下成果：选择不同渗透率的低渗透、特低渗透岩心，进行了气、水和油单相渗流实验，揭示出当岩心渗透率不同时，油层内的流体呈现出拟弹性流变、过渡流变、塑性蠕变三种流变区，从而打破了岩心的绝对渗透率与通过岩心流体性质无关的观点；同类特低渗透岩心的水驱油两相渗流实验表明，两相渗流区较窄。

The difference of bulk density of coastal soils took an effect on infiltration rate and diffuse rate. The infiltration rate and diffuse rate of coastal soils which bulk density was small were big. The water transmitting experiment of coastal soils showed that the saturated conductivity of different layers in soil profile were great, and the saturated conductivity of undisturbed soil was highly higher than that of disturbed soil. The saturated conductivity of coastal soils embanked earlier was lower than that of coastal soils embanked later. Under different water content, the unsaturated conductivity of coastal soils had a great change and the bulk density had an effect on unsaturated conductivity. The soil with a low bulk density had a high unsaturated conductivity. Chlorine ion moved in coastal soil was an inert ion. The distribution of CU in soil was definite and repeated, which is no relation with the time and velocity of infiltration. The concentration of infiltration solution and the texture of coastal soils had no apparent effect on solute movement synthetic dispersion coefficient, while bulk density took an apparent effect on solute movement synthetic dispersion coefficient. Synthetic dispersion coefficient of coastal soils increased as bulk density decreased.

浙江大学硕士毕业论文浙北海涂土壤水分特性及溶质运移模拟研究 4、海涂土壤的导水能力强，且土壤剖面备土层的饱和导水率变化大，原状土的饱和导水率远大于扰动土的饱和导水率，围垦时间较早的海涂土壤的饱和导水率较围垦时间晚的海涂土壤的饱和导水率要小；不同含水量下的非饱和导水率变化范围很大，最大值与最小值差距可达 10'③ 5、容重的不同对入渗率、扩散率、非饱和导水率都有影响，容重小，入渗率、扩散率、非饱和导水率也花 6、在海涂土壤中运移的氯离子是一&惰性离子&，氯离子在土壤运移过程中的分布有一定的确定性和重现性，与入渗时间和入渗速度无关，溶质运移过程中，入渗溶液的浓度和海涂土壤的质地对溶质运移综合扩散系数DSh无明显影响，而土壤容重对溶质运移综合扩散系数DSh有影响，容重小，DSh大。

The contact fatigue strength was measured after the 20CrNi2Mo and 15CrNi6 steel used asdragging gear on quasi high speed locomotive was carburized and quenched as well as peened,com-pared with that of 20CrMnMo steel.The results shown that the contact fatigue strength limits of thesethree types of steel carburized and quenched essentially same,and the contact fatigue strength Iimit hasbeen increased by 5 porcent after peening,and that the failure appoarances of all contact fatiguespecimen were delamination ...

对20CRrNi2Mo、15CrNi6及20CrMnMo渗碳淬火齿轮及15CrNi6渗碳淬火＋喷丸处理齿轮进行了弯曲疲劳试验，介绍了齿轮试件的设计与加工、试验装置与夹具、试验方法及试验数据的统计处理，试验结果表明，20CrNi2Mo和15CrNi6渗碳淬火齿轮在R＝0.99时的σFlim分别为530MPa和375MPa，与20CrMnMo渗碳淬火齿轮相比，弯曲疲劳强度分别提高80％和27％。15CrNi6经渗碳淬火＋喷丸处理齿轮在R＝0.99时的σFlim为490MPa，比未喷丸处理者提高30％。

Meanwhile,atmospheric exposure test and electrolyte soaking method were applied to investigate the effect of different rare earth catalyzers and their content on corrosion resistance of sulfurized Cr12 steel.

借助稀土的催渗作用实现了Cr12钢表面的低温熔融渗硫，用扫描电镜和俄歇电子能谱仪分析了渗硫层的微观形貌和基本成分，并通过大气暴露试验和电解质浸泡试验考察了渗剂中稀土添加剂的类别和加入量对渗硫层抗蚀性的影响规律。

A new implicit pressure calculation method and relevant percolation rule are introduced taking account of the advantages of methods suggested by King, Sorbie and Stenby. Simulation methods for various boundary conditions (fixed pressure or fixed flow rate) and well pattern (line drive, five-spot pattern) are presented.

多相渗流的随机渗滤多尺度模拟多孔介质的多尺度非均质性及工程上对渗流模拟空间范围的要求，使得多相渗流的多尺度模拟对于正确模拟渗流过程具有十分重要的意义。

The types of film hole infiltration can be classified as single point source infiltration, single-line interference infiltration and multiple-line interference infiltration.

膜孔入渗为充分供水条件下的空间三维入渗，可分为三种类型：膜孔自由入渗、膜孔单向交汇入渗和膜孔多向交汇入渗。

On the other hand, the more important thing is because the urban housing is a kind of heterogeneity products.

另一方面，更重要的是由于城市住房是一种异质性产品。

Climate histogram is the fall that collects place measure calm value, cent serves as cross axle for a few equal interval, the area that the frequency that the value appears according to place is accumulated and becomes will be determined inside each interval, discharge the graph that rise with post, also be called histogram.

气候直方图是将所收集的降水量测定值，分为几个相等的区间作为横轴，并将各区间内所测定值依所出现的次数累积而成的面积，用柱子排起来的图形，也叫做柱状图。