英语人>网络例句>混合成的 相关的搜索结果
网络例句

混合成的

与 混合成的 相关的网络例句 [注:此内容来源于网络,仅供参考]

The effects of particle distribution of fly ash from a MSW incinerator on de novo formation of dioxins with the use of organic/inorganic chorine sources and the relative action of different chlorine sources in de novo formation are studied.

选用煤和垃圾混烧的焚烧炉飞灰,研究了飞灰粒径分布对有机/无机氯源从头合成中二噁英生成的影响,以及不同无机氯源在从头合成中的相对作用。

It was found that the synthesized polymer of BDME can dissolve the low boiling point impregnant system which could settle the problem both the diffluence of BMI and the consistence of BMI and EP.

结果表明:合成的BDME共聚物可溶于低沸点溶剂体系,解决了双马来酰亚胺聚合物的溶解以及与环氧树脂共混时的相容性问题。

We have successfully synthesized hydrocarbonbearing inclusions in carbonate at the temperature and pressure of 150 ℃ and 40 MPa, which are near the condition of natural reservoir underground 4 kmAll synthetic hydrocarbonbearing inclusions have been analyzed by microscope and microfluorescence and fourier transform infrared spectroscopyThe results show that the synthesized hydrocarbonbearing inclusions are very similar to those in real reservoirsOur experiments give us four important insights, including:(1) immiscibility of oil and water is the main reason for hydrocarbonbearing inclusions and aqueous inclusions distributed in different fractures;(2) rapid accumulation of oil and gas can be recorded by fluid inclusions;(3) the study of synthetic hydrocarbonbearing inclusions at the temperature and pressure of real reservoir will offer references and standards for the analysis of fluid inclusions in reservoirs;(4) experiment of synthetic hydrocarbonbearing inclusions is a good method for understanding the mechanism of oilwaterrocks interreaction in reservoirs.

文中报道在实际储层温压条件下(150 ℃,40 MPa,大约4 km深度)成功合成了碳酸盐岩烃类包裹体。通过对合成烃类包裹体的显微观察、荧光分析和傅里叶变换红外光谱分析,证实合成了烃类包裹体,且与真实储层中的包裹体具有相似特征,探讨了油水不混溶条件下的流体包裹体捕获机制。实验研究给出4点重要启示:(1)油水不混溶是造成烃类包裹体和水溶液包裹体分带的主要原因;(2)油气快速成藏过程可以被流体包裹体记录;(3)实际储层温压条件下,合成烃类包裹体实验研究有望为储层包裹体分析提供依据和标准;(4)人工合成烃类包裹体为研究含油气条件下储层水岩作用机理提供了一种有效手段。

The perfect synthetic blend, single square brush for the smoothest gel application.

使用 最佳合成混合剂的方形凝胶刷,产生最光滑的应用效果。

Syntheses, Crystal Structures of Some Complexes with Mixed Thiolate and Phosphite Ligands and Electrochemi...

本文对一些膦巯混配的过渡金属配合物的合成、结构、反应规律和电化学进行了研究。

In the world, most of the work is using the ray casting method for such a hybrid rendering. This is because the sample point of geometric objects can be conveniently inserted into the sequence of points in the volume along a ray line.

国际上关于这方面的工作很多,但基本上是运用光线投射方法进行混合成象,因为在每条成象光线的数据样点序列中,便于插入几何形体的样点。

Study on the Modification of Poly (3-hydroxyalkanoate) The aim of this dissertation is to modify bacterially produced poly (3-hydroxybutyrate) and its copolymer with 3-hydroxyvalerate .

本论文目的是改性细菌合成的聚(3-羟基丁酸酯)及其共聚物,采用交联或共混的方法,改变其聚集态结构或超分子结构,从而改善其力学性能。

This article introduces the hardware structure and the software design of a digital video mixer ,which controls the digital video mix processing chip by the PIC single chip microcomputer intermitting technique.

介绍了一种利用P IC单片机中断技术来控制数字视频混合处理芯片,实现将2路或多路数字视频信号混合成1路或多路输出的数字视频混合器的硬件构成和软件设计。

In order to improve the mechanical properties and thermal stability of UP,in-situ hybrid composites of thermotropic liquid crystalline polymer with the group of —NCO synthesized by us,unsaturated polyester and glass fiber were successfully prepared by melt mixing technology and compression molding.

为了改进不饱和聚酯树脂在高低温和交变应力下力学性能和热稳定性较差的缺点,利用自行合成的端基含有活性基团的热致性液晶聚合物对不饱和聚酯/玻璃纤维复合材料改性,用DMA测试了共混物的动态力学性能,用扫描电镜对材料断面的形态结构进行了研究。

Two series of polyurethane acrylate grafted acrylic resins (Acr-g-TPU-PETA and Acr-gPPU-PETA) self-emulsifying systems are obtained by grafting -NCO group modified polyurethane acrylates with acrylic copolymer prepared from n-butyl acrylate, styrene,βhydroxyethyl methacrylate and acrylic acid The self-emulsifying systems showed Newtonian fluidity with viscosity closed to that of water, the solid contents were around 30% The T〓 of 15~4℃ for dried film before photocuring favored film formation at room temperature DSC and DMA results showed that PU-PETA is compatible with acrylic resin in the grafted resin The TG and dTG curves for Acr-g-PU-PETA samples were substantially different from the corresponding blends, and the brodened dTG peaks for photocured grafted resin suggest that there might be multiple interactions among chain segments The photocued film of the grafted resins self-emulsifying system exhibited good overall properties with polyurethane acrylate grafts ranging from 30% to 50%, and Acr-g-TPU-PETA series showed better properties than Acr-gPPU-PETA series The adhesion of the photocured film was 1~2 grade, impact strength was 50kg-cm and flexibility was 1mm The Shore hardness and the adhesion of the film decreased markedly if PETA was replaced by HEMA as photoactive group due to the lower C=C double bond content in the grafted resin The polyhydroxy amine-linked thioxanthones photoinitiators can be evenly dispersed in self-emulsifying system without color spot appearing in the dried film The films photocured with IV〓~IV〓 generally exhibited higher Shore hardness, gloss and solventresistance than that cured with Irgacure 2959 and did not induce the rusting of the iron substrate Pigmenting with titanium oxide had no effect on the photocuring The polyhydroxy amine-linked thioxanthone IV〓 and IV〓 can be new candidates for the formulation of titanium oxide pigmented photocurable water-borne coatings for their pale-yellow appearance and slight interference with the color of the coatings WB 4759 with high water-solubility coalesced and separated from the dried resin film, and even induced the rusting of iron substrate.

以丙烯酸丁酯,甲基丙烯酸-β-羟乙酯,丙烯酸及苯乙烯合成厂丙烯酸共聚树脂,并与含-NCO端基的聚氨酯丙烯酸酯接枝反应,经水性化后,得到两个系列(Acr-g-TPU-PETA和Acr-g-PPU-PETA)各5个不同配比的丙烯酸树脂接枝聚氨酯丙烯酸酯自乳化体系,粘度与水相近,为牛顿流体,固含量30%左右。光固化前干燥涂膜的玻璃化转变温度在-15℃~4℃之间,有利于室温下成膜。DSC及DMA谱表明两种树脂基本相容。Acr-g-PU-PETA的热失重行为明显不同于共混材料,接枝样dTG峰明显宽化,表明接枝样中链段之间的相互作刚有多重性,丙烯酸树脂与聚氨酯之间有一定的相容性。接枝树脂自乳化体系光固化涂层的综合性能以聚氨酯丙烯酸酯成分为50%~30%者相对较好,且以Acr-g-TPU-PETA系列更理想。光固化膜的附着力为1~2级,冲击强度为50kg·cm,柔软性多为1mm。以HEMA代替PETA作为接枝树脂的活性基团,碳—碳双键密度太低,光固化膜交联点太少,硬度和附着力均较差。多羟基胺连硫杂蒽酮光引发剂能均匀分散于树脂自乳化体系和接枝树脂干膜中,不出现色斑,光固化膜肖氏硬度一般高于以Irgacure 2959为光引发剂的光固化膜,光泽度及耐丁酮溶剂性能均有所提高,不会诱导铁基生锈,钛白着色对光固化结果几乎没有影响。本论文所合成的多羟基胺连硫杂蒽酮光引发剂IV〓与IV〓为浅黄色,对光固化涂层的颜色干扰较小,为配制钛白着色光固化水性涂料提供了新的光引发剂。水溶性太强的WB 4759在干膜中易聚结析出,且对所附着的铁基有诱导锈蚀作用。

第2/6页 首页 < 1 2 3 4 5 6 > 尾页
推荐网络例句

As she looked at Warrington's manly face, and dark, melancholy eyes, she had settled in her mind that he must have been the victim of an unhappy attachment.

每逢看到沃林顿那刚毅的脸,那乌黑、忧郁的眼睛,她便会相信,他一定作过不幸的爱情的受害者。

Maybe they'll disappear into a pothole.

也许他们将在壶穴里消失

But because of its youthful corporate culture—most people are hustled out of the door in their mid-40s—it had no one to send.

但是因为该公司年轻的企业文化——大多数员工在40来岁的时候都被请出公司——一时间没有好的人选。