液态

To decrease maufacture costs and improve the ratio of efficiency and outlay.The not exensive emulsifier, hydrophobe and other adminicle were mixed with self-made polyesters, siloxane-polyester copolymers to obtain defoamers which be better than imported.And the factors in the process of compound were studied particularly and systemically.the prime project is as follows:the siloxane-polyester copolymer is synthesized with PPG2000,PEG400,1% hydrogen-containing Polyhydrosiloxanes, hexane diacid,which mol ratio of materials is 7:3:6:5.emulsifying agents are SP-60 and tw-60,the value of HLB is 8.5.its dosage is 5%.the concentration of control- bubble resin is 5%. the concentration of liquid hydrocarbon A is 20%.

为进一步降低消泡剂的生产成本，提高其使用时的效费比，采用价格低廉的乳化剂、疏水剂及其他助剂与所制聚醚酯、有机硅改性聚醚酯进行复配，制取了性能优于进口产品的优质消泡剂；并对复配工艺各要素进行了详细、系统的研究；最佳配方为：PPG2000、PEG400、含氢量1%的硅油，己二酸以物质的量之比为7：3：6：5制成的有机硅改性聚醚酯，乳化剂选择SP-60/TW-60组合、HLB值为8.5、用量5%，抑泡树脂用量5%，液态烃A用量20%，液态烃B用量10%，疏水剂用量15%～20%。

The actinic radiation-curable and cationically polymerizable organic substance is at least one glycidylether of a polyhydric aliphatic, alicyclic or aromatic alcohol having at least three epoxy groups with epoxy equivalent weight between 90 and 800 grams per equivalent, at least one solid or liquid alicyclic epoxide with an epoxy equivalent weight between 90 and 330 grams per equivalent having at least two epoxy groups and monomer purity greater than about 90 % by weight, or at least a solid or liquid epoxycresol novolac or epoxyphenol novolac having epoxy equivalent weight between 130 and 350, or mixtures thereof.

可光化辐射固化并可阳离子聚合的有机物质为至少一种带有至少3个环氧基团环氧当量为90―800克每当量的脂族、脂环族或芳族多元醇的缩水甘油醚，至少一种环氧当量为80―330克每当量带有至少两个环氧基团且单体纯度大于约90wt％的固态或液态脂环环氧化物，或至少一种环氧当量为130―350的固态或液态环氧甲酚线性酚醛清漆或环氧苯酚线性酚醛清漆，或其混合物。

The model was used to simulate the angular velocity distribution of the liquid Al Si alloy under different magnetic intensity .

在对电磁离心工艺深入分析的基础上，建立了该工艺过程中液态金属角速度分布数学模型·并模拟了不同磁场强度下，液态金属角速度分布·结果表明：为避免铸件产生缩松，在电磁离心铸造过程中，必须有合适的磁场强

For fabrication technique, there has been earlier liquid-state fermentation fabrication method compared with solid-state fermentation, while pure-grain fermentation brewage with uncooked materials can be said to be the third-generation latest fabrication technique after traditional solid-state method transformed into liquid-state method.

在酿造工艺上，早就有了相对於固态发酵的液态发酵酿造法，而纯粮生料发酵酿造，可以说是传统的固态法进入液态法后的第三代最新酿造技术。

In Ni-Al alloys the first peak position of Ni-Al pair correlation function is smaller than the sum of Ni and Al atomic radii, meaning a strong interaction between Ni and Al atoms and a chemical bonding with weak covalence.

计算表明，Ni-Al非晶态合金可以用猝冷法制备，它们的结构与液态Ni-Al合金类似但与液态合金相比更加有序且有部分晶化趋向。

The effect of liquid hydrocarbon (cyclopentane and methylcyclohexane) on methane hydrate formation conditions is studied experimentally.

实验研究了液态烃对甲烷水合物形成条件的影响，测试结果表明液态烃降低了甲烷水合物的形成压力，并改变了形成水合物的结构。

Results show that ability of forming Icosahedral symmetry of pure liquid metals is weaker than that of alloys.

研究结果表明，过冷液态纯金属形成廿面体对称的能力弱于过冷液态合金。

The second variation type is called reversion evolution type, which represents the liquid segregation mainly with vapour-liquid fractional distillation. The third variation type is called saltatory variation type, which is formed from the liquid segregation mainly with immiscibility.

称为正向演化类型，是结晶分异结果；②称为反向演化类型，代表气液分馏为主的液态分离；③称为演化突变类型，是不混溶为主的液态分离形成。

Experimental analysis showed that the liquid electrical resistivity of Al-Si alloy was nonlinear with temperature, and the viscosity interruptedly exponential with temperature. The liquid physical properties of Al-Si alloy were affected by not only liquid temperature but also microinhomogeneity.

实验研究表明，Al-Si合金液态电阻率和温度呈非线性关系，粘度和温度呈间断指数曲线关系，Al-Si合金液态物性不仅受温度而且受微观不均匀性影响。

Through experiments, a material—clay slurry containing CMC has been found with the room temperature rheological property similar to that of the metalic alloys in solid-liquid state.

本文在自行研制的高熔点合金固液态流变性能测试装置上测定了ZQSn16—5合金和ZG45两种材料固液态流变性能，建立了这些合金流变性能模型和本构方程。。。

This one mode pays close attention to network credence foundation of the businessman very much.

这一模式非常关注商人的网络信用基础。

Cell morphology of bacterial ghost of Pasteurella multocida was observed by scanning electron microscopy and inactivation ratio was estimated by CFU analysi.

扫描电镜观察多杀性巴氏杆菌细菌幽灵和菌落形成单位评价遗传灭活率。