液

The calculated results show that the enhancement factor increases with the increase of absorbability of particles.

计算结果表明：增强因子随微粒吸附容量的增大显著增加；微粒距离气液界面越远，微粒吸附能力对气液传质的增强越小；在相同粒径与微粒距离气液界面距离的条件下，增强因子随微粒在气液停留时间的增加而增加，但是当停留时间超过一定值后，随着停留时间的增加，增强因子下降；粒径增大，增强因子减小。

Research on techniques for the synthesis of ACR impact modifier with core-shell structure;2. Preparation of polymer-tungsten-silica composite microspheres with multi-layer core-shell structures;3. Organosilicon-acrylate micro emulsion with core-shell structure was synthesized with OP-10,JFC and amyl alcohol nonionic compounded emulsifier by means of seeded emulsion polymerization.

运用种子乳液聚合工艺以OP-10/JFC/戊醇非离子复合乳化剂合成了具有核-壳结构的有机硅-丙烯酸酯微乳液，研究了复合乳化剂类型、丙烯酸酯单体、有机硅单体加入方式和含量、pH值、硫醇对微乳液聚合过程中稳定性和光泽度的影响，通过差示扫描量热仪和透射电镜对微乳液的结构进行了表征。

Organosilicon-acrylate micro emulsion with core-shell structure was synthesized with OP-10,JFC and amyl alcohol nonionic compounded emulsifier by means of seeded emulsion polymerization.

运用种子乳液聚合工艺以OP-10/JFC/戊醇非离子复合乳化剂合成了具有核-壳结构的有机硅-丙烯酸酯微乳液，研究了复合乳化剂类型、丙烯酸酯单体、有机硅单体加入方式和含量、pH值、硫醇对微乳液聚合过程中稳定性和光泽度的影响，通过差示扫描量热仪和透射电镜对微乳液的结构进行了表征。

Under the conditions of stir speeds 400 r·min~(-1) and distance between anode and cathode 1 mm, by using the orthogonal design, the optimum technological conditions were found that the current density was 0.3 A·cm~(-2), initial NaOH concentration in catholyte was 50 g·L~(-1), reaction times of two steps were all theoretical electrochemical reaction times. In the first electrosynthesis, initial Na_2CrO_4 concentration in anolyte was 650 g·L~(-1), and reaction temperature was 80℃. In the second electrosynthesis, initial Na_2Cr_2O_7 concentration in anolyte was 700 g·L~(-1), and reaction temperature was 85℃.

324全氟磺酸增强复合阳离子交换膜、阴阳极液中搅拌速度均为400r·min~(-1)条件下，通过正交实验得到优化工艺条件为：电流密度0.3A·cm~(-2)，阴极液氢氧化钠初始浓度50g·L~(-1)，两步反应时间均为理论电催化反应时间，第一步阳极液铬酸钠初始浓度650g·L~(-1)，反应温度80℃，第二步阳极液重铬酸钠初始浓度700g·L~(-1)，反应温度85℃。

The control of the position of the liquid is very import in the course of the practice produce course, the height of the position of the liquid bring very import infection in the produce. It may influence the produce if the position of the liquid is too below, and it may overflowv if the position of the liquid is too high, it may course the attaint of the equipment, even conduce the casualty of the people!

液位控制在实际的生产过程中非常重要，液位的高低对生产有着重要的影响，液位太底可能影响正常的生产过程，而液位过高则可能出现溶液外溢，会造成设备的损坏，甚至人员的伤亡，给公司造成不可估量的损失！

Fluid strength torque converter although can stepless change the torque in certain scope compared to, but because it exists changes turns between ability and the efficiency contradiction, at present the application fluid strength torque converter generally changes turns the coefficient insufficiently to be all big, satisfies the automobilism request with difficulty, therefore on the high-quality passenger vehicle, widely uses is fluid strength torque converter and the gear type transmission gearbox union composition fluid strength mechanical type variator.

液力变扭器虽然能在一定范围内无级地改变扭矩比，但由于它存在着变扭能力与效率之间的矛盾，目前应用的液力变扭器一般变扭系数都不够大，难以满足汽车使用要求，故在高级轿车上，广泛采用的是液力变扭器与齿轮式变速器联合组成液力机械式无级变速器。

is: the use of a small amount of lime-style Bordeaux mixture (copper sulfate 0.5 kilograms, lime 0.175 kilograms, 50 kilograms plus water), or 50% carbendazim WP 1000 times, or 50% WPspraying 1000 times, to eliminate the ban and leaf anthracnose disease bacteria, 40 percent can be used 2000 times Rogor emulsion aphid virus eradication to prevent the occurrence of bunchy top disease

方法是：采用石灰少量式波尔多液（硫酸铜0.5千克，生石灰0.175千克，加水50千克）、或50%多菌灵可湿性粉剂1000倍液、或50%托布津可湿性粉剂1000倍液喷洒，以消灭炭疽病和叶班病病菌，可用40%乐果乳剂2000倍液消灭带毒蚜虫，预防束顶病的发生。

The invention discloses a rotary bending corrosion fatigue test device. The device includes a rotary bending fatigue test device and a corrosion liquor supplying system; wherein, the rotary bending fatigue test device is used for mounting a test piece and applies bending load on the test piece during the process of driving the test piece to rotate and realizes the test on the fatigue data of the test piece. The corrosion liquor supplying system includes a liquor storage tank, a transfusion pump, a flow adjusting valve and a connecting pipeline. The corrosion liquor supplying system feeds the corrosion liquor to the test piece during testing in real time from an output opening.

本发明公开了一种旋转弯曲腐蚀疲劳实验装置，该装置包括旋转弯曲疲劳实验装置及腐蚀液供给系统，其中，旋转弯曲疲劳实验装置用于试件的装卡，并在驱动试件旋转过程中对其施加弯曲载荷，以及实现对试件疲劳数据的测试；腐蚀液供给系统包括储液罐、输液泵、流量调节阀及连接管道，腐蚀液供给系统通过其输出口实时向测试中的试件输送腐蚀液。

The results show that the growth rate of tetrapod ZnO is controlled by spiral growth and its crystallization is via VLS model. The condensation of tiny zinc droplets in zinc vapor is the key factor of the formation of tetrapod ZnO. The growth steps are formed on the terminated faces as zinc diffuses outwards and the elongation of whiskers continues until zinc inside the droplets is depleted. VS crystallization, which has little effect on the elongation growth, takes place on side faces of the whiskers and consequently makes the whiskers radius increase.

结果表明： T-ZnO晶须的结晶作用是气-液-固方式，晶须生长受螺旋生长机理控制；锌蒸气中产生凝聚生长的锌液滴是制备T-ZnO晶须的关键，锌从液滴内向外扩散在晶须的端面产生生长台阶，随着液滴内的原子向外不断扩散，针体部分就不断地伸长生长，当液滴内的原子全部消耗尽时，晶须便不再发生轴向生长；气-固方式的作用主要是促进晶须棱面生长而使晶须变粗，对轴向生长几乎没有影响。

Based on Hagedorn and Brown's method of wellbore pressure calculation, theoretical and actual liquid holdups at low gas liquid ratio are defined, and the principle and formulas to calculate the critical liquid carrying flow rate are established.

针对低气液比的气井携液情况，以Hagedorn和Brown井筒压力计算方法为基础，定义了理论和实际持液率，建立确定低气液比携液临界流量的原则和计算公式。

The split between the two groups can hardly be papered over.

这两个团体间的分歧难以掩饰。

This approach not only encourages a greater number of responses, but minimizes the likelihood of stale groupthink.

这种做法不仅鼓励了更多的反应，而且减少跟风的可能性。