涂层

I'm still refining my lay-up and epoxy gel-coat application, so I'm getting there.

我还是我的精炼裁员和环氧树脂凝胶涂层的应用，所以我高兴，谢谢大家。

The optical pickup apparatus is provided with the objective lens for applying a light beam to the signal recording layer, a lens holder supporting the objective lens, and a coating layer formed on the disk side end face of the lens holder.

该光拾取装置包括物镜，使光束作用于信号记录层上；一透镜支架，用于支撑物镜；一涂层，它形成在透镜支架的盘侧端面上。

The coating material is prepared with lepidolite 35-55 wt%, potassium feldspar 5-15 wt%, talcum powder 10-20 wt%, soft clay 15-25 wt%, active alumina powder 3-7 wt%, and quartz powder 5-10 wt%, and through mixing into slurry after being added with sodium carboxymethyl cellulose 0.3-1.0 wt%, water glass solution 3-7 wt% and water 30-40 wt%, painting or spraying onto the lining of furnace, drying and sintering at 1200-1300 for 4-12 hr.

本涂层材料在制备时外加羧甲基纤维素钠 0.3～1.0％，水玻璃溶液 3～7％，水 30～40％，将上述混合物经搅拌成均匀的浆体，涂抹或喷涂在炉门内衬材料上，干燥后经1200℃～1300℃下4～12小时的烧成即可制得。

Can anyone tell me or help me to help him to get at least a light brown coating on his skin, the only part ...

谁能告诉我，或者帮助我，帮助他获得了至少浅褐色涂层对他的皮肤，只有一部分。。。

With an old loofah burning charcoal research to fine, after the coated surface of the skin with the lard and mix thoroughly.

一个老烧炭研究，以优良丝瓜后与猪油调匀皮肤表面的涂层。

It was found that the looseness of the coating and residual stress release during the immersion were the main causes of Lc decrease.

涂层致密性的下降及残余压应力的释放是导致Lc降低的主要原因。

It was found that the larger the content of SiC, the more roughenss and looseness the coating was.

SiC的含量越多，涂层表面越粗糙，表层结构越疏松。

This style of aluminum louver has a durable finish that is available in white, brown and black and is ideal for residential construction and use as part of a roof venting system.

这种铝制百叶窗有一个持久涂层，可选白色，棕色和黑色，是住宅建筑作为屋顶通风系统一部分的理想选择。

The results prove that using the laser power P=1.7Kw, scanning velocity V=4mm/s, spot diameter D=3mm, cladding thickness T=0.6mm, 50%: 50% Ni60:Ni-Cr-Cr_3C_2 as laser cladding process can obtain the laser coating with lubricous tight surface, tiny dilution rate ,fining microstructure and higher micro hardness and fine metallurgical-bonding Interface.

试验结果最终证明，激光熔覆工艺参数对熔覆层的宏观形貌、微观组织及涂层性能有极大的影响，在激光熔覆工艺参数为功率P=7Kw，速度Vs=5mm/S光斑直径D=3mm，厚度T=0.6mm，50%；50%的Ni60；Ni-Cr-Cr_3C_2的条件下，所得到熔覆层表面光滑致密、组织细小均匀、稀释率小、硬度高且与基体实现了良好的冶金结合，证明这种方法是一种在提高热锻模寿命方面有前途的方法。

Qing Chundou caused by excessive sebaceous gland secretion can be tender Luffa leaves and stems smashed juice coated surface of the skin with a loofah or wash water, paint on the lesion is also valid.

清Chundou由皮脂腺分泌过多引起的，可以投标丝瓜叶和茎粉碎汁用丝瓜或洗涤水，对皮肤损伤油漆涂层表面也是有效的。

The labia have now been sutured together almost completely.The drains and the Foley catheter come out at the top.

此刻阴唇已经几乎完全的缝在一起了，排除多余淤血体液的管子和Foley导管从顶端冒出来。

To get the business done, I suggest we split the difference in price.

为了做成这笔生意，我建议我们在价格上大家各让一半。